Authors
| Filter results32 paper(s) found. |
|---|
1. Precision Manure Management: It Matters Where You Put Your Manure“Precision fertilizer management” has been around for more than a decade and is practiced widely in Colorado and elsewhere. By precision, we mean application of fertilizer at the right time, in the right place, and in the right amount. However, “Precision Manure Management” is a relatively new concept that converge the best manure management practices with precision nutrient management practices, such as variable rate nutrient application across site-specific management... M.E. Moshia, R. Khosla, J. Davis, D. Westfall |
2. The Cost Of Dependence Upon GPS-enabled Navigation TechnologiesThe adoption of global positioning system (GPS) technology to fine-tune agricultural field operations over the last decade has been unprecedented relative to other agricultural technologies. Resultantly, as agricultural machinery size and capacity increased, field operations have become much more precise due to the synergistic relationship between farm machinery and GPS-enabled guidance technology. With increased dependence upon GPS technology, one must ask “What are the risks associated... C. Lee, T. Griffin |
3. Adoption And Use Of Precision Agriculture Technologies By PractitionersA survey of farmers and farm service providers were initiated to ascertain the adoption and use of precision agriculture technologies as well as the barriers to and incentives for adoption. Farm-level data were collected via audience response system at the 2009 Alabama Precision Ag and Field Crops Conference and local winter production meetings across the six crop reporting districts in Alabama. Service provider data were collected using an online survey. Questions common to farmers and service... A.T. Winstead, S.H. Norwood, T. Griffin, A.M. Adrian, M. Runge, J.P. Fulton |
4. Worldwide Adoption Of Precision Agriculture Technology: The 2010 UpdatePrecision agriculture technology has been on the market for nearly two decades; and the question remains regarding how and to what extent farmers are making the best use of the technology. Yield monitors, GPS-enabled guidance technology, farm-level mapping and GIS software, on-the-go variable rate applications, and other spatial technologies are being used by thousands of farmers worldwide. The USDA Agricultural Resource Management Survey (ARMS) and the annual CropLife/Purdue University Precision... T. Griffin, J. Lowenberg-deboer |
5. Spatial Econometric Approaches to Develop Site-Specific Nematode Management Strategies in Cotton ProductionRoot-knot nematode infestations tend to be spatially clustered within agricultural... Z. Liu, T. Griffin, T. Kirkpatrick, S. Monfort |
6. Landscape Influences on Soil Nitrogen Supply and Water Holding Capacity for Irrigated Corn... T. Shaver, M. Schmer, S. Irmak, S. Van donk, B. Wienhold, V. Jin, A. Bereuter, D. Francis, D. Rudnick, N. Ward, L. Hendrickson, R. Ferguson, V.I. Adamchuk |
7. Aggregating Precision Agriculture Data Across RegionsThe analysis of precision agricultural data has largely focused on one field at a time and to a lesser extent to one individual farm. Recent developments have allowed those with access to data from across large regions to realize additional value by pooled community analysis of precision agriculture data. Pool data analysis has provided greater value to individual farms than they would have gained by only using their own farm-level data. Statistical, economic, and risk methodologies... T. Griffin |
8. Making the Most of Precision Ag Data: Big Data in Farm Managementna ... T. Griffin |
9. Tomato Development Monitoring In An Open Field, Using A Two-Camera Acquisition SystemIntroduction Optimal harvesting date and predicted yield are valuable information when farming open field tomatoes, making harvest planning and work at the processing plant much easier. Monitoring growth during tomato?s early stages is also interesting to assess plant stress or abnormal development. Yet, it is very challenging due to the colours and the high degree of occlusion... F. Rossant, I. Bloch, J. Orensanz, D. Boisgontier, U. Verma, M. Lagarrigue |
10. X-Ray Computed Tomography For State Of The Art Plant And Root AnalysisDuring the last years, the formerly in medical applications established technique of X-ray computed tomography (CT) is used for non-destructive material analysis as well. Adapting this technique for the visualization and analysis of growth processes of plants above and underneath the soil enables new possibilities in the so called smart agriculture. Using State-of-the-art CT systems the computed 3D volume datasets allows the visualization and virtual analysis of hidden structures like roots... S. Reisinger, N. Uhlmann, R. Hanke, S. Gerth |
11. DTE – A Method Which Integrates Statistical Analysis With Economic Evaluation In Large Area Of Type 23 Experiments.Plant production is governed by certain, well-defined cultivation recommendations, especially important when quality standards imposed by contract agreements are to be met. Due to technical and economic conditions, a farmer is not always able to adhere to such recommendations in practice, but at the same time changes on the farm produce market (progress in plant breeding and mechanization of field work, new agrochemicals, effective microorganisms, etc) enforce producers to either... A. Imiolek, M. Imiolek |
12. Precision Agriculture As Bricolage: Understanding The Site Specific FarmerThere is an immediate paradox apparent in precision farming because it applies all of it ‘s precision and recognition of variability to the land, yet operates under the assumption of idealism and normative notions when it comes to considering the farmer. Precision Agriculture (PA) systems have often considered the farmer as an optimiser of profit, or maximiser of efficiency, and therefore replaceable with mathematical constructs, so that although at the centre of decision... I.J. Yule, B.A. Wood |
13. Exploiting The Variability In Pasture Production On New Zealand Hill Country.New Zealand has about four million hectares in medium to steep hill country pasture to which granular solid fertiliser is applied by airplane. On most New Zealand hill country properties where cultivation is not possible the only means of influencing pasture production yield is through the addition of fertilizers and paddock subdivision to control grazing and pasture growth rates. Pasture response to fertilizer varies in production zones within the farm which can be modelled... M.Q. Grafton, P.J. Mcveagh, R.R. Pullanagari, I.J. Yule |
14. Spatial-temporal Evaluation of Plant Phenotypic Traits Via Imagery Collected by Unmanned Aerial Systems (UAS)Unmanned aerial systems (UAS) and a stereovision approach were implemented to generate a 3D reconstruction of the top of the canopy. The 3D reconstruction or CSM (crop surface model) was utilized to evaluate biophysical parameters for both spatial- and temporal-scales. The main goal of the project was to evaluate sUAVs technology to assist plant height and biomass estimation. The main outcome of this process was to utilize CSMs to gain insights in the spatial-temporal dynamic of plants within... S. Varela, G. Balboa, V. Prasad, T. Griffin, I. Ciampitti, A. Ferguson |
15. Development of a Multiband Sensor for Citrus Black Spot Disease DetectionCitrus black spot (CBS), or Guignardia citricarpa, is known as the most destroying citrus fungal disease worldwide. CBS causes yield loss as a result of early fruit drop, and it leaves severely blemished and unmarketable fruit. While leaves usually remain symptomless, CBS generates various forms of lesions on citrus fruits including hard spot, cracked spot, and virulent spot. CBS lesions often appear on maturing fruit, starting two months before maturity. Warm temperature and sunlight exposure... A. Pourreza, W. Lee, J. Lu, P. Roberts |
16. Accuracy of Differential Rate Application Technology for Aerial Spreading of Granular Fertiliser Within New ZealandAerial topdressing of granular fertilizer is common practice on New Zealand hill country farms because of the challenging topography. Ravensdown Limited is a New Zealand fertilizer manufacturer, supplier and applicator, who are funding research and development of differential rate application from aircraft. The motivation for utilising this technology is to improve the accuracy of fertilizer application and fulfil the variable nutrient requirements of hill country farms. The capability of... I.J. Yule, S.E. Chok, M.C. Grafton, M. White |
17. Measuring Pasture Mass and Quality Indices Over Time Using Proximal and Remote SensorsTraditionally pasture has been measured or evaluated in terms of a dry matter yield estimate, which has no reference to other important quality factors. The work in this paper measures pasture growth rates on different slopes and aspects and pasture quality through nitrogen N% and metabolizable energy and ME concentration. It is known that permanent pasture species vary greatly in terms of quality and nutritional value through different stages of maturity. Pasture quality decreases as grass tillers... I.J. Yule, M.C. Grafton, L.A. Willis, P.J. Mcveagh |
18. Hyperspectral Imaging to Measure Pasture Nutrient Concentration and Other Quality ParametersManaging pasture nutrient requirements on large hill country sheep and beef properties based on information from soil sampling is expensive because of the time and labor involved. High levels of error are also expected as these properties are often greatly variable and it is therefore extremely difficult to sample intensively enough to capture this variation. Extensive sampling was also not considered viable as there was no effective means of spreading fertilizer with a variable rate capability... I.J. Yule, R.R. Pullanagari, G. Kereszturi, M.E. Irwin, P.J. Mcveagh, T. Cushnahan, M. White |
19. Spatial-temporal Evaluation of Plant Phenotypic Traits Via Imagery Collected by Unmanned Aerial Systems (UAS)Unmanned aerial systems (UAS) and a stereovision approach were implemented to generate a 3D reconstruction of the top of the canopy. The 3D reconstruction or CSM (crop surface model) was utilized to evaluate biophysical parameters for both spatial- and temporal-scales. The main goal of the project was to evaluate sUAVs technology to assist plant height and biomass estimation. The main outcome of this process was to utilize CSMs to gain insights in the spatial-temporal dynamic of plants within... S. Varela, G. Balboa, V. Prasad, T. Griffin, I. Ciampitti, A. Ferguson |
20. Response of Soybean Cultivars According to Management Zones in Southern BrazilThe positioning of soybean cultivars on fields according your environmental response is new strategy to obtain high soybean yields. The aim of this study was to investigate the agronomic response of six soybean cultivars according management zones in Southern Brazil. The study was conducted in 2013/2014 and in two fields located in Boa Vista das Missões, Rio Grande do Sul, Brazil. The experimental design was a randomized complete block in a factorial arrangement (3x6), with three management... T.J. Amado, A.L. Santi, G.M. Corassa, M.B. Bisognin, R. Gaviraghi, J.L. Pires |
21. Ownership and Protections of Farm DataFarm data has been a contentious point of debate with respect to ownership rights and impacts when access rights are misappropriated. One of the leading questions farmers ask deals with the protections provided to farm data. Although no specific laws or precedence exists, the possibility of trade secret is examined and ramifications for damages discussed. Farm management examples are provided to emphasize the potential outcomes of each possible recourse for misappropriating farm data. ... A. Ellixson, P. Goeringer, T. Griffin |
22. Precision Agriculture Techniques for Crop Management in Trinidad and Tobago: Methodology & Field LayoutAgriculture in Trinidad and Tobago has not advanced at the same rate at which new agricultural technology has been released. This has led to large-scale abandonment of crop lands as challenges posed by labor availability and their agronomic capability could not meet the technological demands for agricultural production, competitiveness and sustainability. There is an urgent need to develop technology-based agriculture models to meet the demands of a modern agricultural sector and to maintain its... G. Seepersad, T. Sampson, S. Seepersad, D. Goorahoo |
23. 3d Object Recognition, Localization and Treatment of Rumex Obtusifolius in Its Natural EnvironmentRumex obtusifolius is one of the most highly competitive and persistent sorts of weed in agriculture. An automatic recognition and plant-treatment system is currently under development as an alternative treatment technique. An infrared-laser triangulation sensor and a high-resolution smart camera are used to generate 3D images of the weeds and their natural environment. In a segmentation process, contiguous surface patches are separated from one other. These 3D surface patches... M. Holpp, T. Anken, D. Seatovic, R. Grueninger, R. Hueppi |
24. Delineation of Site-Specific Nutrient Management Zones to Optimize Rice Production Using Proximal Soil Sensing and Multispectral ImagingEvaluating nutrient uptake and site-specific nutrient management zones in rice in Costa Rica from plant tissue and soil sampling is expensive because of the time and labor involved. In this project, a range of measurement techniques were implemented at different vintage points (soil, plant and UAVs) in order to generate and compare nutrient management information. More precisely, delineation of site-specific nutrient management zones were determined using 1) georeferenced soil/tissue... J.E. Villalobos, J.S. Perret, K. Abdalla, C.L. Fuentes, J.C. Rodriguez, W. Novais |
25. Using Geospatial Data to Assess How Climate Change May Affect Land Suitability for Agriculture ProductionFinding solutions to the challenge of sustainably feeding the world’s growing population is a pressing research need that cuts across many disciplines including using geospatial data. One possible area could be developing agricultural frontiers. Frontiers are defined as land that is currently not cultivated but that may become suitable for agriculture under climate change. Climate change may drive large-scale geographic shifts in agriculture, including expansion in cultivation at the thermal... K. Kc, L. Hannah, P. Roehrdanz, C. Donatti, E. Fraser, A. Berg, L. Saenz, T.M. Wright, R.J. Hijmans, M. Mulligan |
26. Mapping Leaf Area Index of Maize in Tasseling Stage Based on Beer-Lambert Law and Landsat-8 ImageLeaf area index (LAI) is one of the important structural parameters of crop population, which could be used to monitor the variety of crop canopy structure and analyze photosynthesis rate. Mapping leaf area index of maize in a large scale by using remote sensing technology is very important for management of fertilizer and water, monitoring growth change and predicting yield. The Beer-Lambert law has been preliminarily applied to develop inversion model of crop LAI, and has achieved good application... X. Gu, S. Wang, G. Yang, X. Xu |
27. Through the Grass Ceiling: Using Multiple Data Sources on Intra-Field Variability to Reset Expectations of Pasture Production and Farm ProfitabilityIntra-field variability has received much attention in arable and horticultural contexts. It has resulted in increased profitability as well as reduced environmental footprint. However, in a pastoral context, the value of understanding intra-field variability has not been widely appreciated. In this programme, we used available technologies to develop multiple data layers on multiple fields within a dairy farm. This farm was selected as it was already performing at a high level, with well-developed... W. King, R. Dynes, S. Laurenson, S. Zydenbos, R. Macauliffe, A. Taylor, M. Manning, A. Roberts, M. White |
28. Managing the Kansas Mesonet for Site Specific Weather InformationWeather data has become one of the most widely discussed layers in precision agriculture especially in terms of agricultural ‘big data’. However, most farmers (and even other researchers outside of meteorology) are not likely aware of the complexities required to maintain weather stations that provide data. These stations are exposed to the elements 24/7 and provide unique challenges for sustainment during extreme weather conditions. Based upon decades of experience, this paper discusses... T. Griffin, C. Redmond, M. Knapp |
29. Optical High-Resolution Camera System with Computer Vision Software for Recognizing Insects, Fruit on Trees, Growth of CropsWith the inspiration of helping the farmer to grow his crop in the optimal way, Pessl Instruments GmbH, from Weiz, Austria, developed optical high-resolution camera system, together with a computer vision software which is able to recognize insects, fruits on trees and growth of crop. Pessl Instruments develops decision support system which is consisting from remote monitoring of insect traps and remote monitoring of fields and crops. Optical high-resolution camera system can be installed on the... J. Potrpin, G. Pessl, D. Najvirt, C. Pilz |
30. Establishment of a Canola Emergence Assessment Methodology Using Image-based Plant Count and Ground Cover AnalysisManual assessment of emergence is a time-consuming practice that must occur within a short time-frame of the emergence stage in canola (Brassica napus). Unmanned aerial vehicles (UAV) may allow for a more thorough assessment of canola emergence by covering a wider scope of the field and in a more timely manner than in-person evaluations. This research aims to calibrate the relationship between emerging plant population count and the ground cover. The field trial took place at the University... K. Krys, S. Shirtliffe, H. Duddu, T. Ha, A. Attanayake, E. Johnson, E. Andvaag, I. Stavness |
31. Limitations of Yield Monitor Data to Support Field-scale ResearchPrecision agriculture adoption on farms continues to grow globally on farms. Today, yield monitors have become standard technologies on grain, cotton and sugarcane harvesters. In recent years, we have seen industry and even academics leveraging the adoption of precision agriculture technologies to conduct field-scale, on-farm research. Industry has been a primary driver of the increase in on-farm research globally through the development of software to support on-farm research. ... J.P. Fulton, S.A. Shearer, A. Gauci, A. Lindsey, D. Barker, E. Hawkins |
32. Evaluation of Crop Model Based Tools for Corn Site-specific N Management in NebraskaThere is a critical need to reduce the nitrogen (N) footprint from corn-based cropping systems while maintaining or increasing yields and profits. Digital agriculture technologies for site-specific N management have been demonstrated to improve nitrogen use efficiency (NUE). However, adoption of these technologies remains low. Factors such as cost, complexity, unknown impact and large data inputs are associated with low adoption. Grower’s hands-on experience coupled with targeted research... L. Puntel, L. Thompson , T. Mieno, S. Norquest |