Authors
| Filter results30 paper(s) found. |
|---|
1. Interest Of 3D Modeling For Lai Retrieval From Canopy Transmittance Measurements: The Cases Of Wheat And VineyardRemote sensing techniques are now widely used in agriculture, for cultivar screening as well as for decision making tools. Empirical methods relate directly the remote sensing measured values to crop characteristics. These methods are limited by the important amount of ground data necessary for their calibration. Their validity domain is generally not very well defined as well as the associated uncertainties. Conversely, radiative transfer models allow simulating a wide range of conditions, and... B. De solan, R. Lopez lozano, K. Ma, F. Baret, B. Tisseyre |
2. Economic Analysis Of Auto-swath Control For Alabama Crop ProductionWith the rising costs of fertilizer and pesticides and a push towards increasing environmental stewardship, farmers are seeking means to save money while preserving the environment and wildlife habitat. One technology that aids in remedying these concerns is auto-swath control. This investigation evaluates overlap savings using this technology on different application equipment and resulting in economic savings for those adopting it. Several field boundaries were obtained from across the state... D. Mullenix, A.M. Troesch, J.P. Fulton, A.T. Winstead, S.H. Norwood |
3. A Model For Wheat Yield Prediction Based On Real-time Monitoring Of Environmental Factors... B. Dumont, F. Vancutsem, J. Destain, B. Bodson, F. Lebeau, M. Destain |
4. Tools For Evaluating The Potential Of Automatic Section ControlOne of the newest technologies in precision agriculture is automatic section control on application equipment. This technology has tremendous potential to reduce wasted inputs, especially on irregularly shaped fields. Paybacks are not necessarily as great on rectangular fields. Producers considering adoption of the technology need to decide whether they will receive sufficient payback for their field shapes. They must also decide... T. Stombaugh, R.S. Zandonadi, J.D. Luck, T.P. Mcdonald, T. Mcgraw |
5. Application Rate Stability When Implementing Automatic Section Control Technology On Agricultural SprayersAutomatic section control (on and off) technology of sprayer boom sections is an intelligent solution to maximize spray application efficiency during field operations. This technology can reduce over-application of products. Spray controllers available with this technology attempt to maintain the set target rate by adjusting system flow rate based on ground speed and application width. Therefore, as sections are turned on or off, the flow regulating hardware must respond to maintain... A. Sharda, J.D. Luck, J.P. Fulton, S.A. Shearer, S.A. Shearer, D. Mullenix, M. Vanacht |
6. Proper Implementation Of Precision Agricultural Technologies For Conducting On-farm ResearchPrecision agricultural technologies provide farmers, practitioners and researchers the ability to conduct on-farm or field-scale research to refine farm management, improve long term crop production decisions, and implement site-specific management strategies. However, the limitations of these technologies must be understood to draw accurate and meaningful conclusions from such investigations. Therefore, the objective of this paper was to outline the limitations of several... J.P. Fulton, M.J. Darr, R.K. Taylor, T.P. Mcdonald |
7. Citrus Greening Disease Detection Using Airborne Multispectral And Hyperspectral ImagingCitrus greening disease (Huanglongbing or HLB) has become a major catastrophic disease in Florida’s $9 billion citrus industry since 2005, and continued to be spread to other parts of the U.S. There is no known cure for this disease. As of October 2009, citrus trees in 2,702 different sections (square mile) in 34 counties were infected in Florida. A set of hyperspectral imageries were used to develop disease detection algorithms using image-derived spectral library, the mixture tuned... W. Lee, A. Kumar, R. Ehsani, C. Yang, L.G. Albrigo, |
8. Impact Of Winter Grazing On Forage Biomass Topography Soil Strength Spatial RelationshipsSpatial relationships between soil properties, forage productivity, and landscape can be used to manage site-specific grazing. Soil penetration resistance and forage biomass were collected for three years in winter grazing experiment. The three ha experimental area was divided into six paddocks, hay was cut twice per year in the months of May and June, and forage stockpiled after the second cutting. Animals were admitted to paddocks at the end of November, at a stocking rate... E.M. Pena-yewtukhiw, D. Mata-padrino, W. Bryan |
9. Tip Flow Uniformity When Using Different Automatic Section Control Technologies During Field OperationsAutomatic section control (ASC) technology provides a means to reduce double-coverage and application in unwanted areas thereby leading to input savings and improved environmental stewardship. However, the impact of ASC on spray boom dynamics and tip flow uniformity are unknown. Therefore, a study was conducted to evaluate tip flow rate uniformity and control system response in maintaining target application rates during field operation. Field experiments were conducted using two self-propelled... A. Sharda, J.D. Luck, J.P. Fulton, S.A. Shearer, T.P. Mcdonald, D. Mullenix |
10. Temporal Variability In Crop Requirements – Going Beyond Spatial In Ohioplaceholder... R.W. Mullen |
11. Adoption and Non-Adoption of Precision Farming Technologies by Cotton FarmersWe used the 2009 Southern Cotton Precision Farming Survey data collected from farmers in twelve U.S. states (Alabama, Arkansas, Florida, Georgia, Louisiana, Missouri, Mississippi, North Carolina, South Carolina, Tennessee, Texas, and Virginia) to identify reasons on why some adopt and others do not adopt precision farming techniques. Those farmers who provided the cost as the reason for non-adoption are farmers characterized by lower education... A.K. Mishra, M. Pandit, K.P. Paudel, E. Segarra |
12. Compatible ISOBUS Applications Using a Computational Tool for Support the Phases of the Precision Agriculture Cycle... W.C. Lopes, G. Domingues, R.V. Sousa, A.J. Porto, R.Y. Inamasu, R.R. Pereira |
13. Maximizing Agriculture Equipment Capacity Using Precision Agriculture TechnologiesGuidance systems are one of the primary Precision Agriculture technologies adopted by US farmers. While most practitioners establish their initial AB lines for fields based on previous management patterns, a potential exists in conducting analyses to establish AB lines or traffic patterns which maximize field capacity. The objective of this study was to... A.M. Poncet, T.P. Mcdonald, G. Pate, B. Tisseyre, J.P. Fulton |
14. Assessing Water Status in Wheat under Field Conditions Using Laser-Induced Chlorophyll Fluorescence and Hyperspectral MeasurementsClassical measurements for estimating water status in plants using oven drying or pressure chambers are tedious and time-consuming. In the field, changes in radiation conditions may further influence the measurements and thus require... S. El-sayed, U. Schmidhalter, B. Mistele |
15. Suitability Of Fluorescence Sensors To Estimate The Susceptibility Degree Of Spring Barley To Powdery Mildew And Leaf RustThe overall role of precision agriculture is not restricted to those systems for in-field and in-season sensing of the impact of stresses. Much more, its contribution comprises the prevention of stresses, amongst others by supporting the selection of appropriate and stress-tolerant genotypes in breeding programs. In this context, the development, selection and use of cultivars which are tolerant to pathogens establish an essential tool for a more sustainable and environmental-friendly... G. Leufen, G. Noga, M. Hunsche |
16. Selection Of Fluorescence Indices For The Proximal Sensing Of Single And Multiple Stresses In Sugar BeetThe use of fluorescence indices for sensing the impact of abiotic and biotic stresses in agricultural crops is well documented in the literature. Pigment fluorescence gives a precise picture about the plant physiology and its changes following the occurrence of stresses. In general, alterations in such optical signals is caused either by the stress-induced accumulation of one or more fluorophores, or the degradation of specific molecules like chlorophyll. Unfortunately, many stresses... G. Leufen, G. Noga, M. Hunsche |
17. Spectral Vegetation Indices to Quantify In-field Soil Moisture VariabilityAgriculture is the largest consumer of water globally. As pressure on available water resources increases, the need to exploit technology in order to produce more food with less water becomes crucial. The technological hardware requisite for precise water delivery methods such as variable rate irrigation is commercially available. Despite that, techniques to formulate a timely, accurate prescription for those systems are inadequate. Spectral vegetation indices, especially Normalized Difference... J. Siegfried, R. Khosla, L. Longchamps |
18. Open Data for Food Quality and Food Security Control: a Case Study of the Czech RepublicFood quality and food security is of a high public interest in the European Union. In the Czech Republic, food quality and food security is under control of three different public authorities: the Czech Trade Inspection Authority (CTIA) that is affiliated with the Ministry of Industry and Trade of the Czech Republic, the Czech Agriculture and Food Inspection Authority (CAFIA) that is affiliated with the Ministry of Agriculture of the Czech Republic and the regional network of hygienic stations... M. Ulman, M. Stoces, J. Jarolimek, P. Simek |
19. Measurement of In-field Variability for Active Seeding Depth Applications in Southeastern USProper seeding depth control is essential to optimize row-crop planter performance, and adjustment of planter settings to within field spatial variability is required to maximize crop yield potential. The objectives of this study were to characterize planting depth response to varying soil conditions within fields, and to discuss implementation of active seeding depth technologies in Southeastern US. This study was conducted in 2014 and 2015 in central Alabama for non-irrigated maize (Zea mays... A.M. Poncet, J.P. Fulton, T.P. Mcdonald, T. Knappenberger, R.W. Bridges, J. Shaw, K. Balkcom |
20. Use of the Active Sensor Optrx to Measure Canopy Changes to Evaluate Foliar Treatments and to Identify Soil Quality in Table GrapeTable Grape (Vitis vinifera L.) is the main exporting horticultural crop in Chile, with the country being one of the top exporters at the world level. Commonly, grape producers perform trials of different commercial products which are not evaluated in an objective way. On the other hand they do not have the tools to easily identify areas within the field that may have some limiting factor. The use of active ground sensors that pass under the canopy several times during the season may... R.A. Ortega, M.M. Martinez, H.P. Poblete |
21. An Automatic Control Method Research for 9YG-1.2 Large Round BalerWhen manual or semi-automatic round baler working, the tractor driver have to frequently manual the machine according to the bale process at the same time of driving. The driver easily feel fatigue in this operating mode for a long time, so the consistency of the bale’s density can not be guaranteed. And there may be wrong operation. In this article, we use the model 9YG-1.2 large round baler as a research prototype. We study the information collection and processing of the baler’s... J. Dong, Z. Meng, Y. Cong, A. Zhang, W. Fu, R. Pan, Q. Yang, Y. Shang |
22. Development of Farmland-Terrain Simulation System for Consistency of Seeding DepthA farmland-terrain simulation system suitable for rugged topography was designed to study the irregularities of farmland surface morphology led by both topographic fluctuation and terrain tilt. The system consists of terrain simulation mechanism, hydraulic system, control system, etc. The terrain simulation mechanism is connected to the rack through hydraulic cylinder to simulate farmland surface fluctuation. The hydraulic system controls the hydraulic cylinder to drive the terrain simulation... W. Fu, J. Dong, Y. Cong, N. Gao, Y. Li, Z. Meng |
23. Practical Prescription of Variable Rate Fertilization Maps Using Remote Sensing Based Yield PotentialThis paper describes a practical approach for the prescription of variable rate fertilization maps using remote sensing data (RS) based on satellite platforms, Landsat 8 and Sentinel-2 constellation. The methodology has been developed and evaluated in Albacete, Spain, in the framework of the project FATIMA (http://fatima-h2020.eu/). The global approach considers the prescription of N management prior to the growing season, based on a spatially distributed N balance. Although the diagnosis of N... A. Osann, I. Campos, M. Calera, C. Plaza, V. Bodas, A. Calera, J. Villodre, J. Campoy, S. Sanchez, N. Jimenez, H. Lopez |
24. Computer Vision Techniques Applied to Natural Scenes Recognition and Autonomous Locomotion of Agricultural Mobile RobotsThe use of computer systems in Precision Agriculture (PA) promotes the processes’ automation and its applied tasks, specifically the inspection and analysis of agricultural crops, and guided/autonomous locomotion of mobile robots. In this context, this research aims the application of computer vision techniques for agricultural mobile robot locomotion, settled through an architecture for the acquisition, image processing and analysis, in order to segment, classify and recognize patterns... L.C. Lugli, M.L. Tronco, A.J. Porto |
25. Soil Variability Mapping with Airborne Gamma-ray Spectrometry and MagneticsThe knowledge of spatial distribution of agricultural soils physical and chemical properties is critical for profitable and sustainable crop and food production. The collection of soil data presents however obvious problems arising from sampling a dense, opaque and very heterogeneous medium. Conventional methods consisting of ground-based grid survey are laborious, expensive and lack appropriate spatial resolution to allow best farm management decision. Over the past 50 years, airborne geophysics... L. Ameglio, E. Stettler, D. Eberle |
26. Enhancing Spatial Resolution of Maize Grain Yield DataGrain yield data is frequently used for precision agriculture management purposes and as a parameter for evaluating agronomy experiments, but unexpected challenges sometimes interfere with harvest plans or cause total losses. The spatial detail of modern grain yield monitoring data is also limited by combine header width, which could be nearly 14 m in some crops. Remote sensing data, such as multispectral imagery collected via satellite and unmanned aerial systems (UAS), could be used to... J. Siegfried, R. Khosla, D. Mandal, W. Yilma |
27. Changes in Soil Quality when Building Ridges for Fruit PlantationMany fruit plantations are usually performed in ridges for various reasons including, escaping from a clay horizon, improving overall soil quality and drainage, among others. Normally ridges are built using the surface horizons, producing a mixture of soils layers, and therefore changing the quality of the soil at the rooting zone. We were interested in studying the changes in soil properties when building ridges in a flat alluvial soil that was planted with avocado. A detailed... H.P. Poblete, R.A. Ortega |
28. Yield Estimation for Avocado Using Systematic Sampling TechniquesAvocado is a high value crop ranking fourth among the planted fruit species in Chile with more than 32,000 ha. Yield estimation is an important challenge in avocado due to its phenology, the size of the tree, and to the large variability usually observed within the orchards. Due to the practical difficulties to sample the trees we use the following approach: 1) establish a systematic, non-aligned grid with > 20 sampling points (trees)/field, 2) previous to harvest, and once... H.P. Poblete, R.A. Ortega |
29. Is Row-unit Vibration Affected by Planter Speeds and Downforce?Row-unit vibration is an issue created mainly by planter`s opening disks and gauge-wheels contact with the ground. Variability on row-unit vibration could interfere on seed metering and delivery process, affecting crop emergence and final stand. With the amount of embedded technology present on planters, producers are being encouraged to increase planting speeds, which is also one of the main factors for row-unit vibration increasement. In this way, knowing the proper speeds, and using other instruments... L.P. Oliveira, B.V. Ortiz, G.T. Morata, T. Squires, J. Jones |
30. Overcoming Educational Barriers for Precision Agriculture Adoption: a University Diploma in Precision Agriculture in ArgentinaThe lack of educational programs in Precision Agriculture (PA) has been reported as one of the barriers for adoption. Our goal was to improve professional competence in PA through education in crop variability, management, and effective practices of PA in real cases. In the last 20 years different efforts has been made in Argentina to increase adoption of PA. The Universidad Nacional de Rio Cuarto (UNRC) launched in 2021 the first University Diploma in PA, a 9-month program to train agronomist... G. Balboa, A. Degioanni, R. Bongiovanni, R. Melchiori, C. Cerliani, F. Scaramuzza, M. Bongiovanni, J. Gonzalez, M. Balzarini, H. Videla, S. Amin, G. Esposito |