Authors
| Filter results12 paper(s) found. |
|---|
1. Response Of Rhodes Grass (Chloris Gayana Kunth) To Variable Rate Application Of Irrigation Water And Fertilizer NitrogenRhodes grass is cultivated extensively in Saudi Arabia under center pivot sprinkler irrigation system. The research work was carried out to optimize irrigation water and fertilizer nitrogen levels for the crop. The objectives of the study were: 1. To delineate the field in to management zones, 2. To study the effects of variable rate application (VRA) of irrigation water and fertilizer nitrogen on the yield of Rhodes grass. A field experiment was carried out from... V. Patil, R. Madugundu, E. Tola, S. Marey, D.J. Mulla, S.K. Upadhyaya, K.A. Al-gaadi |
2. A Comparison of Three-Dimensional Data Acquisition Methods for Phenotyping ApplicationsCurrently Phenotyping is primarily performed using two-dimensional imaging techniques. While this yields interesting data about a plant, a lot of information is lost using regular cameras. Since a plant is three-dimensional, the use of dedicated 3D-imaging sensors provides a much more complete insight into the phenotype of the plant. Different methods for 3D-data acquisition are available, each with their inherent advantages and disadvantages. These have to be addressed depending on the particular... O. Scholz, F. Uhrmann, S. Gerth, K. Pieger, J. Claußen |
3. Using an Unmanned Aerial Vehicle with Multispectral with RGB Sensors to Analyze Canola Yield in the Canadian PrairiesIn 2017 canola was planted on 9 million hectares in Canada surpassing wheat as the most widely planted crop in Canada. Saskatchewan is the dominant producer with nearly 5 million hectares planted in 2017. This crop, seen both as one of the highest-yielding and most profitable, is also one of most expensive and input-intensive for producers on the Canadian Prairies. In this study, the effect of natural and planted shelterbelts on canola yield was compared with canola yield... K. Hodge, L. Bainard, A. Smith, F. Akhter |
4. Dynamic Feeding Intake Monitoring in Growing-Finishing Pigs Reared Under Precision Feeding StrategiesPigs exposed to challenges with no prior experience change their daily feeding intake pattern. A method identifying deviations from normal feeding patterns could be used to develop a model framework to estimate individual nutrient requirements of challenged pigs fed with precision feeding systems. The objective of this study was to develop a tool for early identification of feed intake deviations in precision fed growing-finishing pigs. Feed intake measurements collected during 84 d in 126 growing–finishing... L. Hauschild, A.R. Kristensen, I. Andretta, C. Pomar, A. Remus |
5. Precision Feeding Can Significantly Reduce Lysine Intake and Nitrogen Excretion Without Compromising the Performance of Growing PigsThe impact of using a mathematical model estimating real-time daily lysine requirements in a sustainable precision feeding program for growing pigs was investigated in two performance trials. Three treatments were tested in the first trial (60 pigs of 41.2±0.5 kg): a three-phase feeding program (3P) obtained by blending fixed proportions of feeds A (high nutrient concentration) and B (low nutrient concentration); and two daily-phase feeding programs in which the blended proportions of feeds... C. Pomar, I. Andretta, J. Rivest, L. Hauschild, J. Pomar |
6. Environmental Impacts of Precision Feeding Programs Applied in Brazilian Pig ProductionThis study was undertaken to evaluate the effect that switching from conventional to precision feeding systems during the growing-finishing phase would have on the potential environmental impact of Brazilian pig production. Standard life-cycle assessment procedures were used, with a cradle-to-farm gate boundary. The inputs and outputs of each interface of the life cycle were organized in a model. Grain production was independently characterized in the Central-West and South regions of Brazil,... C. Pomar, I. Andretta, L. Hauschild, M. Kipper, P.S. Pires |
7. Seed Localization System Suite with CNNs for Seed Spacing Estimation, Population Estimation and DoublesProper seed placement during planting is critical to achieve uniform emergence which optimizes the crop for maximum yield potential. Currently, the ideal way to determine planter performance is to manually measure plant spacing and seeding depth. However, this process is both cost- and labor-intensive and prone to human errors. Therefore, this study aimed to develop seed localization system (SLS) system to measure seed spacing and seeding depth and providing the geo-location of each planted seed.... A. Sharda, R. Harsha chepally |
8. Creating a Comprehensive Software Framework for Sensor-driven Precision AgricultureRobots and GPS-guided tractors are the backbone of smart farming and precision agriculture. Many companies and vendors contribute to the market, each offering their own customized solutions for common tasks. These developments are often based on vendor-specific, proprietary components, protocols and software. Many small companies that produce sensors, actuators or software for niche applications could contribute their expertise to the global efforts of creating smart farming solutions, if their... O. Scholz, F. Uhrmann, M. Weule, T. Meyer, A. Gilson, J. Makarov, J. Hansen, T. Henties |
9. Airborne Spectral Detection of Leaf Chlorophyll Concentration in Wild BlueberriesLeaf chlorophyll concentration (LCC) detection is crucial for monitoring crop physiological status, assessing the overall health of crops, and estimating their photosynthetic potential. Fast, non-destructive, and spatially extensive monitoring of LCC in crops is critical for accurately diagnosing and assessing crop health in large commercial fields. Advancements in hyperspectral remote sensing offer non-destructive and spatially extensive alternatives for monitoring plant parameters such as LCC.... K. Barai, C. Ewanik, V. Dhiman, Y. Zhang, U.R. Hodeghatta |
10. Real-time Seed Mapping Using Direct MethodsSeed distance estimations are critical for planter evaluation and the prediction of planting parameter performance. However, these estimations are typically not conducted in real-time. In this study, we propose a real-time seed mapping approach using cameras and computer vision networks, augmented by a Kalman filter for vehicle state estimation. This process involves the transformation of pixel coordinates into real-world coordinates. We conduct a comparative analysis between these estimates and... A. Sharda, R. Harsha chepally |
11. Design and Development of a Spraying System for Under Canopy Rover and Its Integration with Computer Vision SystemChemical spraying such as herbicides, insecticides are essential in any agricultural field for controlling pest, weed etc. and ultimately increasing yield. About one-third of agricultural yields rely on the utilization of pesticides. However, around 3 billion kilograms of pesticides are used worldwide every year and effective utilization of it is merely 1%. The precise application of these chemicals is necessary to reduce negative impacts on environment as well as human health. The application... N.K. Piya, A. Sharda, J.R. Persch, D. Flippo, R. Harsha chepally |
12. Real Time Application of Neural Networks and Hardware Accelerated Image Processing Pipeline for Precise Autonomous Agricultural SystemsModern agriculture is increasingly turning to automation and precision technology to optimize crop management. In this context, our research addresses the development of an autonomous pesticide spraying rover equipped with advanced technology for precision agriculture. The primary goal is to use a neural network for real-time aphid detection in Sorghum crops, enabling targeted pesticide application only to infested plants. To accomplish this, we've integrated cutting-edge technologies and... J. Raitz persch, R. Harsha chepally, N.K. Piya |