Topics
| Filter results38 paper(s) found. |
|---|
1. Specification Of Data Dimension To Measure The Data Quality On Cotton ProductionThe management of cotton cultivation and agriculture in general, depend on quality data enabling the retrieving of useful information as an aid in decision making related to management techniques and farm management . Part of this task depends intelligible data generated through the processes that make up this segment . Creating means for enabling the classification data is the starting point for making decisions regarding any corrections or adjustments in the mass data . The heterogenei... C. Santos, A. Hirakawa |
2. Detection Of Fruit In Canopy Night-Time Images: Two Case Studies With Apple And MangoReliable estimation of the expected yield remains a major challenge in orchards. In a recent work we reported the development of an algorithm for estimating the number of fruits in images of apple trees acquired in natural daylight conditions. In the present work we tested this approach with night-time images of similar apple trees and further adapted this approach to night-time images of mango trees. Working with the apple images required on... R. Linker, A. Payne, K. Walsh, O. Cohen |
3. NOAA's National Geodetic Survey?s National Spatial Reference System And The National Height ModernizatioThe National Geodetic Survey (NGS) is responsible for the establishment and maintenance of the National Spatial Reference System (NSRS). NGS manages a network of Continuously Operating Reference Stations (CORS) that provides Global Navigation Satellite System (GNSS) data and serves as the backbone of the NSRS. Our goal is to maintain a network of stations to serve as control for any project undertaken by local surveyors. In addition, numerous other applications benefit from a... J.D. Rigney |
4. A Dual Motor Actuator Used To Detach Fruit By Shaking Limbs Of Fruit TreesMechanizing the fruit removal operation during fresh-market apple harvesting will result in considerable cost savings for fruit growers. This study introduces a mechanical fruit removal technique that uses a unique limb shaking mechanism called a Dual Motor Actuator (DMA). The DMA was developed as an infinitely variable end-effector that applies rhythmic motions to a fruiting limb to remove fruit. The novelty of the DMA design is the use of two eccentrics mounted to electric mot... M. De kleine, M. Karkee, Q. Zhang, K. Lewis |
5. Post-Harvest Quality Evaluation System On Conveyor Belt For Mechanically Harvested CitrusRecently, a machine vision technology has shown its popularity for automating visual inspection. Many studies proved that the machine vision system can successfully estimate external qualities of fruit as good as manual inspection. However, introducing mechanical harvesters to citrus industry caused the following year’s yield loss due to the loss of immature young citrus. In this study, a machine vision system on a conveyor belt was developed to inspect mechanica... W. Lee, R. Ehsani, F. Roka, D. Choi, C. Yang |
6. Tomato Development Monitoring In An Open Field, Using A Two-Camera Acquisition SystemIntroduction Optimal harvesting date and predicted yield are valuable information when farming open field tomatoes, making harvest planning and work at the processing plant much easier. Monitoring growth during tomato?s early stages is also interesting to assess plant stress or abnormal development. Yet, it is very challenging due to the colours and the high degree of ... F. Rossant, I. Bloch, J. Orensanz, D. Boisgontier, U. Verma, M. Lagarrigue |
7. Sound Based Detection Of Moths In Open FieldsIntroduction Open field farming of tomatoes suffers from the presence of harmful moths whose larvas are devastating. Detecting automatically the presence of moths allows regulating the use of pesticides, according to the actual population present in the field. Up to now, sex pheromone traps have been used, the number of captured insects giving some indication about the population. However, proper inspection of the traps i... F. Rossant, J. Orensanz, D. Boisgontier, N. Bouhlel, M. Lagarrigue |
8. Automatic Soil Penetrometer Measurements And GIS-Based Documentation With The Autonomous Field Robot Platform BoniRobFor a sustainable agriculture, reliable measurements of soil properties and its interpretation are of highest relevance. Until today most of the measurements are carried out manually or by integrating off-line laboratories. Moreover, the number and density of measurement points is always an important aspect with respect to the statistical significance of the results. In this work a fully automatic measurement system has been developed and applied for the first time with free sel... M. Göttinger, S. Hinck, K. Möller, A. Ruckelshausen, C. Scholz |
9. New Innovation Approaches In Precision Farming – The Example Of The Base Fertilization ProcessNowadays, innovations in Precision Farming are mostly bound to further developments and new solution approaches on the technical level. However, for efficient service provision it is important to work on strategies for application of these technologies. To satisfy customers’ demands for highly specialized methods and detailed results collaboration between various companies in service consortiums is often required. In doing so, every company can provide its proven and evidentially e... J. Friedrich, M. Becker, M.F. Schneider, S. Klingner |
10. Row-Crop Planter Requirements To Support Variable-Rate Seeding Of MaizeCurrent planting technology possesses the ability to increase crop productivity and improve field efficiency by precisely metering and placing crop seeds. Growing high yielding crops not only requires using the right seed variety and rate but also achieving optimal performance with available planter technology. Planter performance depends on using the correct planter and technology (display and rate controller system) setup which consists of determining optimal settings for different pla... J.P. Fulton, K.S. Balkcom, B.V. Ortiz, T.P. Mcdonald, G.L. Pate, S.S. Virk, A. Poncet |
11. Evaluation Of A Sensor-Based Precision Irrigation System For Efficiency And To Monitor And Control Groundwater Over-Pumping In OmanOman is a country with a total area of 309,500 km2. However, cultivable land in Oman is estimated to be less than 2%, which amounts to about 6100 km2. More than 50 percent of the arable lands located in the northern coastal belt of Al Batinah region. The country with average annual rainfall around 100 mm, has limited natural fresh water resources and has been facing the serious problem of sea water intrusion into the scarce groundwater reserves due to undis... H.P. Jayasuriya, S. Zekri, R. Zaier, H. Al-buasidi, A. Teirab, N. Hamza |
12. Precision Thinning Of Fruit CropsL. Damerow, C. Seehuber and M. Blanke University of Bonn, Germany Correspondence: damerow@uni-bonn.de Abstract for o r a l Thinning is a pre-requisite in the majority of fruit crops worldwide in order to overcome or prevent alternate bearing (change of years with large and low yields) and to provide regular yields of high qu... M.M. Blanke, L. Damerow, C. Seehuber |
13. Effect Of Starch Accumulation In Huanglongbing Symptomatic Leaves On Reflecting Polarized LightHuanglongbing (HLB) or citrus greening disease is an extremely dangerous infection which has severely influenced the citrus industry in Florida. It was also recently found in California and Texas. There is no effective cure for this disease reported yet. The infected trees should be identified and removed immediately to prevent the disease from being spread to other trees. The visual leaf symptoms of this disease are green islands, yellow veins, or vein corking; howeve... W. Lee, A. Pourreza |
14. Fusion Of Multi Exposure Stereo Images And Thermography For Obstacle Detection On Agricultural VehiclesIntroduction Over the years agricultural vehicles become increasingly automated with trajectory row tracking and master-slave vehicle configurations, and autoguided vehicles. Safety is an important aspect. Auto guided vehicles exist in industry, where the surroundings are semistructured and flat. Sopme cars have collision sensors. But in agriculture the ground is not flat. The vehicles are meant to be driven into crops, and there are certain paths... K. Nielsen, M.R. Nielsen |
15. Angular Velocity Meter Application Study In The Agricultural Vehicle Navigation SystemIn the agricultural vehicle navigation system, most frequently used steering feedback sensors are rotary potentiometer and rotary encoder to measure the wheel angle, and linear potentiometer to measure the stretching length of steering cylinder. In practice, these sensors are usually installed a little troublesomely, and often have relatively low reliability because of the more installation fittings. With the progress of MEMS technical, angular velocity meter achieves higher accuracy whi... J. Hu, L. Gao |
16. Development Of An Hydraulic Penetrometer Data Acquisition SoftwareCurrently , in addition to increased production , the costs reduction are focused in order to increase efficiency in production, so the modern agriculture intent to find planting methods which extract the maximum possible data about the used area for making possible to do this preparation in the most appropriate manner, considering the shortcomings of evaluating these data. This method is contained in the concepts of an agricultural practice that has been steadily growing, ... I. Marasca, D.P. Casiero, S.P. Guerra, K.P. Lanças, E.R. Spadim |
17. Design, Error Characterization And Testing Of A System To Measure Locations Of Fruits In Tree CanopiesMapping the variability of fruit size and quality within tree canopies in commercial orchards is an important tool for implementing precision horticulture. To do so at a reasonably fast rate requires localization technologies that offer sufficient speed and accuracy, at a range long enough to cover entire trees – or several trees at a time. Existing approaches for measuring fruit locations include: manual (centimeter accuracy and measurement time in the order of minutes pe... S.G. Vougioukas, F.J. Jimenez, F. Khosro anjom, R. Elkins, C. Ingels, R. Arikapudi |
18. Advances In Automating Individual Plant Care Of Vegetable CropsAutomation of individual crop plant care in commercial vegetable crop fields has increased practical feasibility and improved efficiency and economic benefit if a systems approach is taken in the engineering design to mechanization that incorporates precision planting techniques. In addition to the optimization in the biological productivity of crop plants when the spatial distribution of crop plants allows their uniform access to nutrients, water and light in an optimum u... M. Pérez ruiz, D.C. Slaughter |
19. Agribot: Development Of A Mobile Robotic Platform To Support Agricultural Data CollectionPrecision Agriculture and agricultural practices that take into account environment protection, leads to several research challenges. Sampling scale and the precision required by these new agricultural practices are often greater than those required by traditional agriculture, raising the costs of production. This whole process requests an expressive number of researches in developing automation instruments. Amongst them, the use of remote sensing techniques based on On-the-Go s... R. Tabile, A. Porto, R. Inamasu, R. Sousa |
20. CANopen Implementation To Wireless Sensor NetworkField buses are widely applied in the control of mobile machines. They enable us to build embedded control systems, where the sensors and actuators are connected to each other by the bus. The most commonly used bus standard for Control Area Network (CAN) between tractors and implements in agriculture and forestry is ISOBUS. Once the number of sensors and actuators increases in the implement side, a combination of ISOBUS and CANopen can be applied. CANopen is a communication prot... R. Virrankoski, M. Madetoja |
21. GNSS Positioning Techniques For AgricultureBroadacre, row crop and high value crops each have different positioning needs. Within these agricultural groups, individual practices such as mapping, guidance and machine control for tillage, application and harvest each have their own Global Navigation Satellite Systems (GNSS) needs for an optimal price/performance and value equation. New research and algorithm development by NovAtel has resulted in a significant simplification of positioning methodology with incr... P.M. Casiano, T.G. Morley, Z. Sadeque |
22. Performance Evaluation Of Single And Multi-GNSS Receivers In Agricultural Field ConditionsSelection of appropriate receivers and utilization methods of positioning systems are important for better positioning in different applications of precision agriculture. Objective of this research was to evaluate the performance of single and multi-GNSS receivers at stationary and moving conditions in typical Korean agricultural sites such as open field, orchard area, and mountainous area A single-GNSS receiver (Model: R100; Hemisphere GNSS, Scottsdale, AZ, USA) and a multi-GNS... Y. Kim, M. Song, S. Chung , M.S. Kabir, Y. Huh |
23. Instrumented Blades With Automated Control Used In Chisel Plough Acting In Variable DepthsSoil compaction is a problem that affects most of the tilled areas of Brazil, being caused by several factors, such as overloading and intense machine traffic, use of unsuitable tires for applied load and inflation pressures outside the recommendation, machines in the field with the water content of the soil not recommended and several other problems. There are available several models and systems of measuring soil compaction in Brazil; however, the sensors of t... K.P. Lanças, J. Testa, B.B. Fernandes, T.M. Machado |
24. Control System Applied To No-Till Seeding For High-Quality OperationA high quality crop seeding operation should enable a rapid and uniform establishment of a desired plant population. Therefore, a no-till seeder must provide a seeding environment that allows the absorption of water by seeds and appropriate temperature and aeration conditions for germination and emergence processes. To stimulate these processes, the seed needs full contact with soil in order to accelerate the absorption of water and oxygen. Covering the furrow with straw is another impor... A.G. Araujo, A.D. Toledo, A.R. Hirakawa, A.L. Johann |
25. Rapid Data Acquisition For In-Field Plant PhenomicsHigh throughput sensing is necessary for the rapid acquisition of plant canopy physical and physiological parameters on field scales. Simultaneous measures of these descriptive parameters will provide a clearer picture of plant response to biotic and abiotic stressors. Information obtained can assist in early identification of desired genetic traits and the degree to which they are expressed. Identifying these traits and their expression can provide higher efficiency in genetic selection... M.R. Sclemmer, K.H. Holland |
26. Introducing An Integrated Framework To Optimize Cotton Variable Rate Irrigation In Humid RegionsManagement of supplemental irrigation in humid regions is critical because both over and under estimation of the irrigation water requirement can cause cotton lint yield reduction. Spatial variation of the soil physical characteristics is significant in west Tennessee hence precision irrigation strategies should be applied to achieve the optimum lint yield. Despite the significant enhancement in instrumentation and measurements, there are several challenges that need t... A. Haghverdi, B.G. Leib |
27. Generic ISOBUS Compliant Precision Agriculture Functionality In A Proprietary Terminal ConceptDue to increasing investment costs for agricultural resources crop input management precise application technologies are exceedingly gaining interests for customers. One approach for increasing efficiency is using common GPS-devices for reducing over- and underlaps during application processes, and to adjust application rate based on predefined application maps. Driven by this, implement manufacturers are heading towards machinery, which is able to control application rate and ac... G. Happich |
28. Variable Rate Application to Improve Cro Protection in Orchards and Vineyards. Prescription Maps and Satellites to Accomplish EU Farm to Fork StrategyAccurate canopy characterization is crucial for a targeted application of plant protection products following variable rate application (VRA) concept. Remote sensing offers a robust and rapid monitoring tool that allows determining the characteristics of the vegetation from aerial platforms at different spatial resolutions. Previous work have demonstrated that drone-based imagery can be used to estimate canopy height, width, and canopy volume accurately enough to allow a full automation of VR... E. Gil, F. Garcia-ruíz, J. Biscamps, R. Salcedo, J. Campos |
29. Application Accuracy of Two Different Sprayer Flow Control Systems During Site-specific Pesticide ApplicationsPrecise and efficient pesticide applications are crucial aspects of modern agriculture to effectively manage pests throughout the season while also reducing the negative impacts of pesticides on the environment. Recent advancements in spray technology, such as pulse width modulation (PWM) and individual nozzle control, have enabled capabilities for site-specific pesticide applications on modern application equipment. With the increasing interest of industry and growers in site-specific pestic... R.K. Meena, S. Virk, C. Byers, G. Rains |
30. Quantifying Constant Rate and Sensor-based Variable Rate Nitrogen (N) Fertilizer Response on Crop Vigor and YieldAgricultural fertilizer application is one of the essential components of crop production. It enhances crop growth, yield, and quality of the crop. The most widely used methods for nutrient application are the constant rate and variable rate application. An improper supply of fertilizer can potentially hamper crop growth and reduce the quality of the crop. Therefore, there is a need to select the best optimum nutrient application method for proper utilization of the nutrients. Therefore, the ... R. Singh, A. Sharda |
31. Assessing Spray Coverage Variability of an Under-canopy Robotic Sprayer System in Sorghum CropAn under-canopy robotic sprayer system was developed for site-specific pest management in row crops. However, the effect of nozzle type and spray coverage variability at different points within the plant canopy was unknown. The objective of this study was to quantify the spray coverage at multiple locations within the sorghum crop canopy to determine the effectiveness of such robotic systems. The experiments were conducted in a sorghum field in Ashland, Kansas, using XR8001 flat fan and TXVS6... P. Pokharel, A. Sharda, M. Gadhwal, B. Aryal |
32. Design and Development of a Spraying System for Under Canopy Rover and Its Integration with Computer Vision SystemChemical spraying such as herbicides, insecticides are essential in any agricultural field for controlling pest, weed etc. and ultimately increasing yield. About one-third of agricultural yields rely on the utilization of pesticides. However, around 3 billion kilograms of pesticides are used worldwide every year and effective utilization of it is merely 1%. The precise application of these chemicals is necessary to reduce negative impacts on environment as well as human health. The applicatio... N.K. Piya, A. Sharda, J.R. Persch, D. Flippo, R. Harsha chepally |
33. Development and Evaluation of a Novel Variable-orifice Nozzle Flow and Droplet Size Control SystemSpray drift from crop production operations has been a critical concern across the U.S. as evidenced by the EPA’s efforts to mitigate pesticide drift. Recently, a novel spray control system was developed and evaluated which provided real-time control of both spray droplet size and flow rate. This was achieved via electromechanical control of a variable orifice nozzle along with a novel control system which incorporates real-time weather data to vary system pressure and orifice size and ... T. Monroe, J.D. Luck, S. Marx |
34. Quantifying Boom Movement in Agricultural Sprayer Booms Using Neural Networks for Real-world Field ScenariosApplication rate errors in self-propelled agricultural sprayers remain a significant concern, necessitating a comprehensive understanding of boom movement during actual field operating scenarios. This study introduces new objectives to quantify boom movement across commercial sprayers when operated by different individuals and compares these movements among various machines. The goal is to develop a metric that identifies potential improvement needs for boom height control system. The approac... T. Kaloya, A. Sharda, A. Dalal |
35. Fungicide Application Methods and Corn Variety Effect on Corn Silage Deoxynivalenol LevelsMycotoxin contamination is a major challenge for dairy producers. Deoxynivalenol, (DON) a mycotoxin produced by the fungus Fusarium graminearum, can infect both the corn stalk and ear. Studies have found that 86% of corn silage samples have some concentration of DON. Deoxynivalenol causes major issues in the dairy industry causing decreased milk production, lower components, higher SCC, and decreased reproductive performance. The objective of this research project was to dete... J.M. Hartschuh, R. Minyo |
36. Machine Learning Model to Predict Total Nozzle Volume Delivery for Pulse Width Modulated Flow ControllersProduct flow rate in the Pulse Width Modulation (PWM) variable rate technologies depends on the duty cycle. However, the actual product flow rate at any duty cycle depends on pressure rise, stable pressure during the cycle, fall time and pressure drop across the nozzle body. The current controller does not consider the pressure drops and the estimation of actual flow during each cycle at any duty cycle cannot be estimated with capturing high-frequency pressure data. Knowledge of volume delive... S. Dua, A. Sharda |
37. Development of a High-throughput UAV System for Precision Weed Detection and Control Using Laser Speckle Imaging and UV-C IrradiationTraditional weed control methods, predominantly reliant on herbicides or labor-intensive ground robots, present notable environmental and efficiency challenges within agricultural practices. To address these concerns, this study introduces an innovative approach utilizing unmanned aerial vehicles (UAVs) for autonomous weed detection and control in agricultural fields. Our proposed system depends on the agility of UAV platforms, integrating two primary technologies. Firstly, Laser Speckle Imag... M.A. Salem, A.H. Rabia |
38. Integration of Post Emergence Herbicide (PoE) with Nano-urea for Optimized Management of Weed in Indian Black Mustard (Brassica Juncea L.)Nano-urea (NU) is gaining attention due to its environmental benefits and precise application. Unlike traditional urea fertilizers, NU is engineered at the nanoscale, which increases its efficiency and reduces environmental impacts. However, limited research has been done to evaluate the combined effect of herbicides and NU. Therefore, the overarching goal of our study is to conduct field trials to understand the optimization rates of the synergized composition of herbicide and NU. Our hypoth... B. Duary, U. Debangshi, W. Dutta, G. Jha |