Topics
| Filter results95 paper(s) found. |
|---|
1. Nugis: The Development Of A Nutrient Use Geographic Information SystemNuGIS is a project of the International Plant Nutrition Institute (IPNI). The goal was to examine sources of nutrients (fertilizers and manure) and compare this to crop removal. The project used GIS and database analysis to create maps at the state and county level and then used GIS to migrate the budget analysis to the local watershed and regional watershed levels. This paper will cover the sources of data used, how the data was processed to generate county level numbers, and how GIS was use... Q. Rund, R. Williams |
2. Using Crop Budgeting Spreadsheets Can Assist Producers In Evaluating The Cost Effectiveness Of Adoption Of The Various Precision Agriculture TechnologiesProducers asked the question which Precision Agriculture Technologies can be economical in my farming operation? The use of easily modified crop budgets can help the producer evaluate the technologies and how they affect the profitability of one’s agricultural enterp... R.N. Klein, R. Wilson |
3. On-Farm Trials Using Precision Ag in Northeast LouisianaThe availability of yield monitors and precision application equipment on producers’ farms have made it much easier for researchers to take the results from experiment station trials and apply them to producers’ fields. Treatments/methods are applied in strips, by prescription, embedded plots or in combination. Fields are divided into zones for analyzing the harvest yield data. These can include soil type, soil Ec, or other criteria. Treatments are analyzed... D. Burns, D. Overstreet, D. Kruse, R. Frazier, D. Blanche |
4. The Use of Artificial Neuronal Networks to Generate Decision Rules for Site-Specific Nitrogen FertilizationThe basis for successful and sustainable agriculture is the utilization of adequate decision rules. When it comes to precision farming, these rules have to be applied to each sub-field, where they determine the actions to be taken. There are many possibilities for achieving site-specific information for a field (e.g. measuring the electrical conductivity of soil or yield mapping). But which rules should be used to link this information with profit maximization treatment recommendati... P. Wagner |
5. The Adoption of Information Technologies and Subsequent Changes in Input Use in Cotton ProductionThe use of precision farming has become increasingly important in cotton production. It allows farmers to take advantage of knowledge about infield variability by applying expensive inputs at levels appropriate to crop needs. Essential to the success of the p... N.M. Thompson, J.A. Larson, B.C. English, D.M. Lambert, R.K. Roberts, M. Velandia, C. Wang |
6. Adoption and Non-Adoption of Precision Farming Technologies by Cotton FarmersWe used the 2009 Southern Cotton Precision Farming Survey data collected from farmers in twelve U.S. states (Alabama, Arkansas, Florida, Georgia, Louisiana, Missouri, Mississippi, North Carolina, South Carolina, Tennessee, Texas, and Virginia) to identify reasons on why some adopt and others do not adopt precision farming techniques. Those farmers who provided the cost as the reason for non-adoption are farmers characterized by lower educatio... A.K. Mishra, M. Pandit, K.P. Paudel, E. Segarra |
7. Adoption and Tendencies of Precision Agriculture Technologies in the Tocantins State, BrazilAlthough precision agriculture is widely used throughout Brazilian crop production, it has not been used to increase the efficiency use of agricultural inputs. Besides, technologies available have not bee... L. Bortolon, E. Borghi, A. Luchiari junior, E.S. Bortolon, A.A. Freitas, R.Y. Inamasu, J.C. Avanzi |
8. Selection and Utility of Uncooled Thermal Cameras for Spatial Crop Temperature Measurement Within Precision AgricultureSince previous research used local, single-point measurements to indicate crop water stress, thermography is presented as a technique capable of measuring spatial temperatures supporting its use for monitoring crop water stress. This study investigated measurement accuracy of uncooled thermal cameras under strict environmental conditions, developed hardware and software to implement uncooled thermal cameras and quantified intrinsic properties that impact measurement accuracy and repeatability... D.L. Mangus, A. Sharda |
9. In-field Plant Phenotyping Using Multi-view Reconstruction: an Investigation in EggplantRapid methods for plant phenotyping are a growing need in agricultural research to help accelerate improvements in crop performance in order to facilitate more efficient utilization of plant genome sequences and the corresponding advancements in associated methods of genetic improvement. Manual plant phenotyping is time-consuming, laborious, frequently subjective, and often destructive. There is a need for building field-deployable systems with advanced sensors that have both high-speed and h... T. Nguyen, D. Slaughter, B. Townsley, L. Carriedo, J. Maloof, N. Sinha |
10. A Harvesting Robot System for Fresh Cherry Tomato in GreenhouseIn order to improve the , a new harvesting robot system for cherry tomato was designed and tested, which mainly consisted of a railed-type vehicle, a visual servo unit, a manipulator, a picking end-effector, and other accessories. According to the greenhouse environment and the standard planting mode, the robot configuration was determined, whose operating space could be adjusted horizontally and vertically in order to enlarge the harvesting range. Besides, a harvested fruits automatic transp... F. Qingchun, W. Xiu, W. Xiaonan, W. Guohua |
11. Spectral Vegetation Indices to Quantify In-field Soil Moisture VariabilityAgriculture is the largest consumer of water globally. As pressure on available water resources increases, the need to exploit technology in order to produce more food with less water becomes crucial. The technological hardware requisite for precise water delivery methods such as variable rate irrigation is commercially available. Despite that, techniques to formulate a timely, accurate prescription for those systems are inadequate. Spectral vegetation indices, especially Normalized Differenc... J. Siegfried, R. Khosla, L. Longchamps |
12. High Resolution Hyperspectral Imagery to Assess Wheat Grain Protein in a Farmer's FieldThe agricultural research sector is working to develop new technologies and management knowledge to sustainably increase food productivity, to ensure global food security and decrease poverty. Wheat is one of the most important crops into this scenario, being among the three most important cereal commodities produced worldwide. Precision Agriculture (PA) and specially Remote Sensing (RS) technologies have become in the recent years more affordable which has improved the availability and flexi... F.A. Rodrigues jr., I. Ortiz-monasterio, P.J. Zarco-tejada, F.H. Toledo, U. Schulthess, B. Gérard |
13. Spatial-temporal Evaluation of Plant Phenotypic Traits Via Imagery Collected by Unmanned Aerial Systems (UAS)Unmanned aerial systems (UAS) and a stereovision approach were implemented to generate a 3D reconstruction of the top of the canopy. The 3D reconstruction or CSM (crop surface model) was utilized to evaluate biophysical parameters for both spatial- and temporal-scales. The main goal of the project was to evaluate sUAVs technology to assist plant height and biomass estimation. The main outcome of this process was to utilize CSMs to gain insights in the spatial-temporal dynamic of plants within... S. Varela, G. Balboa, V. Prasad, T. Griffin, I. Ciampitti, A. Ferguson |
14. Field Tests and Improvement of Sensor and Control Interface Modules with Improved Compatibility for GreenhousesNumber of greenhouses has been increased in many countries to control the cultivation conditions and improve crop yield and quality. Recently, various sensors and control devices, and also wireless communication tools have been adopted for efficient monitoring and control of the greenhouse environments. However, there have been farmers’ demands for improved compatibility among the sensors and control devices. In the study, sensor and control interface modules with improved compatibility... K. Han, S. Chung |
15. High Resolution 3D Hyperspectral Digital Surface Models from Lightweight UAV Snapshot Cameras – Potentials for Precision Agriculture ApplicationsPrecision agriculture applications need timely information about the plant status to apply the right management at the right place and the right time. Additionally, high-resolution field phenotyping can support crop breeding by providing reliable information for crop rating. Flexible remote sensing systems like unmanned aerial vehicles (UAVs) can gather high-resolution information when and where needed. When combined with specialized sensors they become powerful sensing systems. Hyp... H. Aasen |
16. The Device of Air-assisted Side Deep Precision Fertilization for Rice TransplanterRice is the most important crop in China, which has the largest plant area. Fertilization is an important process of rice production, which directly affects the yield of crops, reasonable and effective use of chemical fertilizer can improve the yield of crops. At present, the mechanization level of rice fertilization is very low in China, and the artificial fertilization requires a large amount of fertilizer which caused the uneven distribution. The rice side deep fertilizing is an ideal way ... C. Zhao, G. Wu, Z. Meng, W. Fu, L. Li, X. Wei |
17. Design of a Greenhouse Monitoring System Based on GSM TechnologiesNowadays, internet and mobile technologies are developing and being used in everyday life. Systems based on mobile technologies and IoT (Internet of Things) are being popular in every area of life and science. Innovative IoT applications are helping to increase the quality, quantity, sustainability and cost effectiveness of agricultural production. In this study; a system which monitors temperature, relative humidity and PAR (Photosynthetically Active Radiation) and warns the farmer... G.T. Seyhan, U. Yegul, M. Ayık |
18. Detecting Nitrogen Variability at Early Growth Stages of Wheat by Active Fluorescence and NDVILow efficiency in the use of nitrogen fertilizer, has been reported around the world which often times result in high production costs and environmental damage. Today, unmanned aerial vehicles (UAV) cameras are being used to obtain conditions of crops, and can cover large areas in a short time. The objectives of this study were (i) to investigate N-variability in wheat at early growth stages using induced fluorescence indices, NDVI measured by active sensor and NDVI obtained by digital i... E. Patto pacheco, J. Liu, L. Longchamps, R. Khosla |
19. Comparison Between Tractor-based and UAV-based Spectrometer Measurements in Winter WheatIn-season variable rate nitrogen fertilizer application needs a fast and efficient determination of nitrogen status in crops. Common sensor-based monitoring of nitrogen status mainly relies on tractor mounted active or passive sensors. Over the last few years, researchers tested different sensors and indicated the potential of in-season monitoring of nitrogen status by unmanned aerial vehicles (UAVs) in various crops. However, the UAV-platforms and the available sensors are not yet accepted t... M. Gnyp, M. Panitzki, S. Reusch, J. Jasper, A. Bolten, G. Bareth |
20. Measuring Pasture Mass and Quality Indices Over Time Using Proximal and Remote SensorsTraditionally pasture has been measured or evaluated in terms of a dry matter yield estimate, which has no reference to other important quality factors. The work in this paper measures pasture growth rates on different slopes and aspects and pasture quality through nitrogen N% and metabolizable energy and ME concentration. It is known that permanent pasture species vary greatly in terms of quality and nutritional value through different stages of maturity. Pasture quality decreases as grass t... I.J. Yule, M.C. Grafton, L.A. Willis, P.J. Mcveagh |
21. First Experiences with the European Remote Sensing Satellites Sentinel-1A/ -2A for Agricultural ResearchThe Copernicus program headed by the European Commission (EC) in partnership with the European Space Agency (ESA) will launch up to twelve satellites, the so called “Sentinels” for earth and environmental observations until 2020. Within this satellite fleet, the Sentinel-1 (microwave) and Sentinal-2 (optical) satellites deliver valuable information on agricultural crops. Due to their high temporal (5 to 6 days repeating time) and spatial (10 to 20 m) resolutions a continuous monit... H. Lilienthal, H. Gerighausen, E. Schnug |
22. Steering Strategy Selection of a Robotic Platform for Bin Management in Orchard EnvironmentFor a robotic bin-managing system working in an orchard environment, especially in modern narrow row spaced orchards in the Pacific Northwest (PNW) region of the U.S., path planning is an essential function to achieve highly efficient bin management. Unlike path planning for a car-like vehicle in an open field, path planning for a four-wheel-independent-steered (4WIS) robotic bin-managing platform in orchard environment is much more challenging due to the very confined working space between t... Y. Ye, L. He, Q. Zhang |
23. Evaluation of a Seed-fertilizer Application System Using a Laser ScannerThe system evaluated is a design that combines planter and sprayer technologies to allow clients to plant crops while simultaneously spraying initial fertilizer on or in close proximity to the seed. The system is an idea Capstan Ag Systems has been pursuing for around 15 years, and has recently been revived in a partnership with Great Plains Manufacturing Company. Great Plains Manufacturing released the final product under the name AccushotTM at the 201... P. Weckler, N. Wang, C. Zhai, L. Zhang, B. Luo, J. Long, R. Taylor |
24. Planet Labs' Monitoring Solution in Support of Precision Agriculture PracticesSatellite imagery is particularly useful for efficiently monitoring very large areas and providing regular feedback on the status and productivity of agricultural fields. These data are now widely used in precision farming; however, many challenges to making optimal use of this technology remain, such as easy access to data, management and exploitation of large datasets with deep time series, and sharing of the data and derived analytics with users. Providing satellite imagery through a cloud... K.J. Frotscher, R. Schacht, L. Smith, E. Zillmann |
25. Comparison Between High Resolution Spectral Indices and SPAD Meter Estimates of Nitrogen Deficiency in CornLow altitude remote sensing provides an ideal platform for monitoring time sensitive nitrogen status in crops. Research is needed however to understand the interaction between crop growth stage, spatial resolution and spectral indices derived from low altitude remote sensing. A TetraCam camera equipped with six bands including the red edge and near infrared (NIR) was used to investigate corn nitrogen dynamics. Remote sensing data were collected during the 2013 and 2014 growing seasons at four... D. Mulla, A. Laacouri, D. Kaiser |
26. A Photogrammetry-based Image Registration Method for Multi-camera SystemsIn precision agriculture, yield maps are important for farmers to make plans. Farmers will have a better management of the farm if early yield map can be created. In Florida, citrus is a very important agricultural product. To predict citrus production, fruit detection method has to be developed. Ideally, the earlier the prediction can be done the better management plan can be made. Thus, fruit detection before their mature stage is expected. This study aims to develop a thermal-visible camer... H. Gan, W. Lee, V. Alchanatis |
27. Development of Land Leveling Equipment Based on GNSSAn attitude adjustable land leveling equipment was designed. The reference elevation of the land to be leveled was generated based on the topographic data which was acquired by the RTK-GNSS technology. The blade lifting mechanism was controlled by comparing the reference elevation and the real-time blade’s elevation and attitude data which was obtained by the dual antenna GNSS receiver and as a result the land leveling operation was implemented. A new algorithm using the electro-hydraul... W. Fu, G. Wu, H. Bao, X. Wei, Z. Meng |
28. Potential Improvement in Rice Nitrogen Status Monitoring Using Rapideye and Worldview-2 Satellite Remote SensingFor in-season site-specific nitrogen (N) management of rice to be successful, it is crucially important to diagnose rice N status efficiently across large area in a timely fashion. Satellite remote sensing provides a promising technology for crop growth monitoring and precision management over large areas. The FORMOSAT-2 satellite remote sensing imageries with 4 wavebands have been used to estimate rice N status. The objective of this study was to evaluate the potential of using high spatial ... S. Huang, Y. Miao, F. Yuan, M.L. Gnyp, Y. Yao, Q. Cao, V. Lenz-wiedemann, G. Bareth |
29. CropSAT - a Public Satellite-based Decision Support System for Variable-rate Nitrogen Fertilization in ScandinaviaCropSAT is a free-to-use web application for satellite-based production of variable-rate application (VRA) files of e.g. nitrogen (N) and fungicides currently available in Sweden and Denmark. Even in areas frequently covered by clouds, vegetation index maps from data derived from low-cost or freely available optical satellites can be used in practice as a cost-efficient tool in time-critical applications such as optimized nitrogen use. During the very cloudy year 2015, or more useable ima... M. Söderström, H. Stadig, J. Martinsson, M. Stenberg, K. Piikki |
30. Static and Kinematic Tests for Determining Spreaders Effective WidthSpinner box spreaders are intensively used in Brazil for variable rate applications of lime in agriculture. The control of that operation is a challenging issue because of the complexity involved on the interactions between product and machine. Quantification of transverse distribution of solids thrown from the spinner box spreaders involves dynamic conditions tests where the material deposited on trays is evaluated along the pass of the machinery. There is a need of alternative testing metho... L. Maldaner, T. Canata, J. Molin, B. Passalaqua, J.J. Quirós |
31. Measuring Height of Sugarcane Plants Through LiDAR TechnologySugarcane (Saccharum spp.) has an important economic role in Brazilian agriculture, especially in São Paulo State. Variation in the volume of plants can be an indicative of biomass which, for sugarcane, strongly relates to the yield. Laser sensors, like LiDAR (Light Detection and Ranging), has been employed to estimate yield for corn, wheat and monitoring forests. The main advantage of using this type of sensor is the capability of real-time data acquisition in a non-destructive way, p... T.F. Canata, J.P. Molin, A.F. Colaço, R.G. Trevisan, P.R. Fiorio, M. Martello |
32. Window-based Regression Analysis of Field DataHigh-resolution satellite and areal imagery enables multi-scale analysis that has previously been impossible. We consider the task of localized linear regression and show that window-based techniques can return results at different length scales with very high efficiency. The ability of inspecting multiple length scales is important for distinguishing factors that vary over different length scales. For example, variations in fertilization are expected to occur on shorter len... A.M. Denton, H. Chavan, D.W. Franzen, J.F. Nowatzki |
33. Helvis - a Small-scale Agricultural Mobile Robot Prototype for Precision AgricultureThe use of agricultural robots is emerging in a complex scenario where it is necessary to produce more food to feed a crescent population, decrease production costs, fight plagues and diseases, and preserve nature. Around the world, there are many research institutes and companies trying to apply mobile robotics techniques in agricultural fields. Mostly, large prototypes are being used and their shapes and dimensions are very similar to tractors and trucks. In the present study, a small-scale... M. Becker, A.E. Velasquez, H.B. Guerrero, V.A. Higuti, D.M. Milori, D.V. Magalhães |
34. Hyperspectral Imaging to Measure Pasture Nutrient Concentration and Other Quality ParametersManaging pasture nutrient requirements on large hill country sheep and beef properties based on information from soil sampling is expensive because of the time and labor involved. High levels of error are also expected as these properties are often greatly variable and it is therefore extremely difficult to sample intensively enough to capture this variation. Extensive sampling was also not considered viable as there was no effective means of spreading fertilizer with a variable rate capabili... I.J. Yule, R.R. Pullanagari, G. Kereszturi, M.E. Irwin, P.J. Mcveagh, T. Cushnahan, M. White |
35. Creating Prescription Maps from Historical Imagery for Site-specific Management of Cotton Root RotCotton root rot, caused by the soilborne fungus Phymatotrichopsis omnivore, is a severe plant disease that has affected cotton production for over a century. Recent research found that a commercial fungicide, Topguard (flutriafol), was able to control this disease. As a result, Topguard Terra Fungicide, a new and more concentrated formulation developed specifically for this market was registered in 2015, so cotton producers can use this product to control the disease. Cotton root rot only inf... C. Yang, G.N. Odvody, J.A. Thomasson, T. Isakeit, R.L. Nichols |
36. Retrieving Crops' Quantitative Biophysical Parameters Through a Newly Developed Multispectral Sensor for UAV PlatformsToday’s intensive agricultural production needs to increase its efficiency in order to keep its profitability in the current market of decreasing prices on one hand, and to reduce the environmental impact on the other. Crop growers are starting to adopt side dressing nitrogen fertilization as part of their fertilization programs, for which they need accurate information about biomass development and nitrogen condition in the crop. This information is usually acquired through ground samp... A. Pimstein, Y. Zur, M. Le roux |
37. Simulation of Curiosity and Exo Mars Rovers on Agriculture TerrainImproving agricultural productivity is one of the biggest challenges Agriculture and Engineering face. A possible solution is the creation of soil databases and/or maps to apply precision agriculture techniques, aiming to produce more in the same land, using less agricultural supplies. This practice may be developed with the help of rovers applied to e.g. agricultural data collect, mapping, scouting and supply tasks. However, the rover needs to move and adapt to the terrain to obtain a real a... J.F. Archila-diaz, M. Becker |
38. Development of a Crop Edge Line Detection Algorithm Using a Laser Scanner for an Autonomous Combine HarvesterThe high cost of real-time kinematic (RTK) differential GPS units required for autonomous guidance of agricultural machinery has limited their use in practical auto-guided systems especially applicable to small-sized farming conditions. A laser range finder (LRF) scanner system with a pan-tilt unit (PTU) has the ability to create a 3D profile of objects with a high level of accuracy by scanning their surroundings in a fan shape based on the time-of-flight measurement principle. This paper des... C. Jeon, H. Kim, X. Han, H. Moon |
39. Development of Sensor Reflection Indices To Predict Yield And Protein Content Based On In-Season N StatusEnvironmental and economic demands make it necessary for farmers to adopt management systems that improve Nitrogen Use Efficiency. The premium paid to producers has made farmers striving for maximum grain protein levels because protein is a very important quality component of grains and an important attribute in the market place. The protein content of wheat grains approximately ranges from 8 to 20%. The optimization of nitrogen (N) fertilization is the object of intense research ... U. Yegul, B. Talebpour, U. TÜrker, B.M. EmİnoĞlu, G.T. Seyhan, A. Çolak |
40. Post Processing Software for Grain Yield Monitoring System Suitable to Korean Full-feed CombinesPrecision agriculture (PA) has been adopted in many countries and crop and country specific technologies have been implemented for different crops and agricultural practices. Although PA technologies have been developed mainly in countries such as USA, Europe, Australia, where field sizes are large, need of PA technologies has been also drawn in countries such as Japan and Korea, where field sizes are relatively small (about 1 ha). Although principles are similar, design concept and practical... K. Lee, S. Chung, J. Lee, S. Kim, Y. Kim, M. Choi |
41. The Methods and Applications of Artificial Intelligence Used in the Technologies of Precision AgricultureThe methods and applications of artificial intelligence more and more are linking with technologies of precision agriculture. The classical and modern approaches to artificial intelligence used for problem solving in the technologies of precision agriculture. Searching methods include uninformed and informed search methods which is better way to achieve optimality. Expert systems are typical classical approaches to artificial intelligence and they can be applied for problem solutions. Decisio... A. Gailums |
42. Intuitive Image Analysing on Plant Data - High Throughput Plant Analysis with Lemnatec Image ProcessingFor digital plant phenotyping huge amounts of 2D images are acquired. This is known as one part of the phenotyping bottleneck. This bottleneck can be addressed by well-educated plant analysts, huge experience and an adapted analysis software. Automated tools that only cover specific parts of this analysis pipeline are provided. During the last years this could be changed by the image processing toolbox of LemnaTec GmbH. An automated and intuitive tool for the automated analysis of huge amount... S. Paulus, T. Dornbusch, M. Jansen |
43. In Season Estimation of Barley Biomass with Plant Height Derived by Terrestrial Laser ScanningThe monitoring of plant development during the growing season is a fundamental base for site-specific crop management. In this regard, the amount of plant biomass at a specific phenological stage is an important parameter to evaluate the actual crop status. Since biomass is directly only determinable with destructive sampling, methods of recording other plant parameters, such as crop height or density, which are suitable for reliable estimations are increasingly researched. Over the past two ... N. Tilly |
44. Spatial-temporal Evaluation of Plant Phenotypic Traits Via Imagery Collected by Unmanned Aerial Systems (UAS)Unmanned aerial systems (UAS) and a stereovision approach were implemented to generate a 3D reconstruction of the top of the canopy. The 3D reconstruction or CSM (crop surface model) was utilized to evaluate biophysical parameters for both spatial- and temporal-scales. The main goal of the project was to evaluate sUAVs technology to assist plant height and biomass estimation. The main outcome of this process was to utilize CSMs to gain insights in the spatial-temporal dynamic of plants within... S. Varela, G. Balboa, V. Prasad, T. Griffin, I. Ciampitti, A. Ferguson |
45. Assessing Soybean Injury from Dicamba Using RGB and CIR Images Acquired on Small UAVsDicamba is an herbicide used for postemegence control of several broadleaf weeds in corn, grain sorghum, small grains, and non-cropland. Currently, dicamba-tolerant (DT) soybean and cotton are under development, which provide new options to combat weeds resistant to glyphosate, the most widely used herbicide. With the use of DT-trait cotton and soybean, off-target dicamba drift onto susceptible crops will become a concern. To relate soybean injury to different rates of dicamba applicati... Y. Huang, H. Brand, D. Pennington, K. Reddy, S.J. Thomson |
46. Misalignment Between Sugar Cane Transshipment Trailers and TractorSugarcane production system is dependent on a continuous cutting and regrowth of cane plants from their roots, on which traffic should be avoided to ensure the physiological integrity of regrowth and productivity. This need for accuracy in sugarcane machine traffic boosted the adoption of automated steering systems, especially on harvesters. Tractors with the transshipment trailers, which continually accompany the harvesters in the field, yet do not adopt it or use technology with lower... B.P. Passalaqua, J. Molin, J. Salvi, A.P. Aguilera |
47. A Dynamic Variable Rate Irrigation Control SystemCurrently variable rate irrigation (VRI) prescription maps used to apply water differentially to irrigation management zones (IMZs) are static. They are developed once and used thereafter and thus do not respond to environmental variables which affect soil moisture conditions. Our approach for creating dynamic prescription maps is to use soil moisture sensors to estimate the amount of irrigation water needed to return each IMZ to an ideal soil moisture condition. The UGA Sma... G. Vellidis, V. Liakos, W. Porter, X. Liang, M.A. Tucker |
48. Utilizing Space-based Technology for Cotton Irrigation SchedulingAccurate soil moisture content measurements are vital to precision irrigation management. Electromagnetic sensors such as capacitance and time domain reflectometry have been widely used for measuring soil moisture content for decades. However, to estimate average soil moisture content over a large area, a number of ground-based in-situ sensors would need to be installed, which would be expensive and labor intensive. Remote sensing using the microwave spectrum (such as GPS signals) has been us... A. Khalilian, X. Qiao, J.O. Payero, J.M. Maja, C.V. Privette, Y.J. Han |
49. Greenhouse Study to Identify Glyphosate-resistant Weeds Based on Canopy TemperatureDevelopment of herbicide-resistant crops has resulted in significant positive changes to agronomic practices, while repeated and intensive use of herbicides with the same mechanisms of action has caused the development of herbicide-resistant weeds. As of 2015, 35 weed species are reported to be resistant to glyphosate worldwide. A greenhouse study was conducted to identify characteristics which can be helpful in field mapping of glyphosate resistant weeds by using UAV imagery. The experiment ... A. Shirzadi, M. Maharlooei, O. Hassanijalilian, S. Bajwa, K. Howatt, S. Sivarajan, J. Nowatzki |
50. Challenges and Successes when Generating In-season Multi-temporal Calibrated Aerial ImageryDigital aerial imagery (DAI) of the crop canopy collected by aircraft and unmanned aerial vehicles is the yardstick of precision agriculture. However, the quantitative use of this imagery is often limited by its variable characteristics, low quality, and lack of radiometric calibration. To increase the quality and utility of using DAI in crop management, it is important to evaluate and address these limitations of DAI. Even though there have been improvements in spatial reso... P.M. Kyveryga, J. Pritsolas, J. Connor, R. Pearson |
51. Field Sampling and Electrochemical Detection of Nitrate in Agricultural SoilsNitrate is an essential plant nutrient and is added to farm fields to increase crop yields. While the addition of nitrate is important for production, over-fertilization with nitrate can lead to leaching and contamination of water bodies. Increased nitrate loading in water sources then leads to eutrophication and hypoxia in downstream regions. Many efforts are being made to accurately control nitrate fertilizer additions to fields. Here, we present a soil sampling device that directly samples... J. Brockgreitens, M. Bui, A. Abbas, D. Mulla |
52. Value of Map Sharing Between Multiple Vehicles Using Automated Section Control in the Same FieldLarge area farms and even moderate sized farms employing custom applicators and harvesters have multiple machines in the same field at the same time conducting the same field operation. As a method to control input costs and minimize application overlap, these machines have been equipped with automatic section control (ASC). Over application is a concern especially for more irregularly shaped fields; however modern technology including automated guidance combined with automatic section ... J. Bennett, C. Wilson, A. Sharda, T. Griffin |
53. Detection of Potato Beetle Damage Using Remote Sensing from Small Unmanned Aircraft SystemsRemote sensing with small unmanned aircraft systems (sUAS) has potential applications in agriculture because low flight altitudes allow image acquisition at very high spatial resolution. We set up experiments at the Oregon State University Hermiston Agricultural Research and Extension Center (HAREC) to assess advantages and disadvantages of sUAS for precision farming. In 2014, we conducted an experiment in irrigated potatoes with 4 levels of artificial infestation by Colorado Potato Bee... E. Hunt, S.I. Rondon, A.E. Bruce, R.W. Turner, J.J. Brungardt |
54. Time Series Analysis of Vegetation Dynamics and Burn Scar Mapping at Smoky Hill Air National Guard Range, Kansas Using Moderate Resolution Satellite ImageryMilitary installments are import assets for the proper training of armed forces. To ensure the continued viability of the training grounds, management practices need to be implemented to sustain the necessary environmental conditions for safe and effective training. This analysis uses satellite imagery over time to gain insight into vegetation conditions over a large military installment. MODIS imagery was collected multiple times a year for 11 years at Smoky Hill Air National Guard Range (Sm... E. Williams |
55. Evaluation of a Sensor and Control Interface Module for Monitoring of Greenhouse EnvironmentProtected horticulture in greenhouses and plant factories has been increased in many countries due to the advantages of year-round production in controlled environment for improved productivity and quality. For protected horticulture, environmental conditions are monitored and controlled through wired and wireless devices. Various devices are used for monitoring and control of spatial and temporal variability in crop growth environmental conditions. Recently, various sensors and control devic... N. Sung, S. Chung, Y. Kim, K. Han, J. Choi, J. Kim, Y. Cho, S. Jang |
56. Melon Classification and Segementation Using Low Cost Remote Sensing Data DronesObject recognition represents currently one of the most developing and challenging areas of the Computer Vision. This work presents a systematic study of various relevant parameters and approaches allowing semi-automatic or automatic object detection, applied onto a study case of melons on the field to be counted. In addition it is of a cardinal interest to obtain the quantitative information about performance of the algorithm in terms of metrics the suitability whereof is determined by the f... T. Zhao, Y. Chen, J. Franzen, J. Gonzalez, Q. Yang |
57. Real-time Gauge Wheel Load Variability on Planter with Downforce Control During Field OperationDownforce control allows planters to maintain gauge wheel load across a range of soil resistance within a field. Downforce control is typically set for a target seed depth and either set to manually or automatically control the gauge wheel load. This technology uses load cells to actively regulate downforce on individual row units by monitoring target load on the gauge wheels. However, no studies have been conducted to evaluate the variability in gauge wheel load observed during planter opera... A. Sharda, S. Badua, D. Flippo, I. Ciampitti, T.W. Griffin |
58. Aerial Photographs to Predict Yield Loss Due to N Deficiency in CornNitrogen fertilizer is a crucial input for corn production, and in the U.S. more nitrogen is applied to corn than to all other crops combined. In wet weather, nitrogen can be lost from soil by leaching and by denitrification. Which process predominates depends largely on soil drainage. Nitrogen deficiency in nearly any plant is expressed by a lighter green color of leaves than in nitrogen-sufficient plants. Nitrogen deficiency in corn can be easily seen from the air.&n... P. Scharf |
59. Almond Canopy Detection and Segmentation Using Remote Sensing Data DronesThe development of Unmanned Aerial System (UAV) makes it possible to take high resolution images of trees easily. These images could help better manage the orchard. However, more research is necessary to extract useful information from these images. For example, irrigation schedule and yield prediction both rely on accurate measurement of canopy size. In this paper, a workflow is proposed to count trees and measure the canopy size of each individual tree. The performances of three different m... T. Zhao, M. Cisneros, Y. Chen, Q. Yang, Y. Zhang |
60. Design of VAV System of Air Assisted Sprayer in Orchard and Experimental Study in ChinaOne type of new automatic target detecting based on size of canopy with variable chemical dosage and air-flow of fan orchard sprayer was designed and developed to meet the demand of chemical pest control in orchards. Canopy parameter data scanned by infrared sensors and LIDAR (Light Detection and Ranging) were used to detect the target and to design spraying algorithm and PWM (Pulse Width Modulation) control system. Four integrated five-finger atomizers were equipped on each side of sprayer, ... H. Xiongkui, L. Longlong, S. Jianli, Z. Aijun, L. Yajia |
61. Automated Support Tool for Variable Rate Irrigation PrescriptionsVariable rate irrigation (VRI) enables center pivot management to better meet non-uniform water and fertility needs. This is accomplished through correctly matching system water application with spatial and temporal variability within the field. A computer program was modified to accommodate GIS data layers of grid-based field soil texture properties and fertility needs in making management decisions. The program can automatically develop a variable rate application prescription along the lat... A.T. Nguyen, A.L. Thompson, K.A. Sudduth, E.D. Vories, A.T. Nguyen |
62. AGOC: Agriculture Operations CenterAfter another long day, the farmer sits down in front of a computer (wishing this time was instead spent on the front porch catching a last glimpse of the sunset), and reflects once again ... What if ... I actually knew the health of 100% of my crops rather than what I know today. a mere 20%. What if ... there was an effective, simple way to synchronize crop scouting and crop imagery efforts. ... M. Zamzow, H. Moulton |
63. The Agriculture Operations Center: the Answer to “What If...”Can’t farming be simpler? Yes…with an Agriculture Operations Center -- we call it the AGOC, and it’s the next big step for precision agriculture. Leveraging decades of lessons from the US Air Force, the AGOC provides the ability to schedule, execute, collect, consolidate, and distribute all the support a farmer needs from satellites, piloted aircraft, unmanned aircraft, sensing, modeling, and analysis…all packaged into “one stop shopping.”&nbs... M. Zamzow |
64. Precision Agriculture Techniques for Crop Management in Trinidad and Tobago: Methodology & Field LayoutAgriculture in Trinidad and Tobago has not advanced at the same rate at which new agricultural technology has been released. This has led to large-scale abandonment of crop lands as challenges posed by labor availability and their agronomic capability could not meet the technological demands for agricultural production, competitiveness and sustainability. There is an urgent need to develop technology-based agriculture models to meet the demands of a modern agricultural sector and to maintain ... G. Seepersad, T. Sampson, S. Seepersad, D. Goorahoo |
65. Refractive Index Based Brix Measurement System for Sugar and Allied IndustriesAn attempt has been made to design optimization of Refractormetric based method for the measurement of Brix. Optimization of various constructional parameters including selection and location of source, prism and detector, position of source, angular position and height of source from prism plane, divergent angle of source, refractive index of prism, size of prism, the location of detector to pick up the optimum reflected light, refractive index of sample, critical angle, choice of suit... M.L. Dongare, B.T. Jadhav, A.D. Shaligram |
66. From Data to Decisions - Ag Technologies Provide New Opportunities and Challenges with On-Farm ResearchU.S. farmers are challenged to increase crop production while achieving greater resource use efficiency. The Nebraska On-Farm Research Network (NOFRN), enables farmers to answer critical production, profitability, and sustainability questions with their own fields and equipment. The NOFRN is sponsored by the University of Nebraska – Lincoln Extension and derives from two separate on-farm research efforts, the earliest originating in 1990. Over the course of the last 29 years... L. Thompson, K. Glewen, N. Mueller, J. Luck |
67. Learn, Share, Connect and Be Inspired: How One Farming Group in Australia is Driving PA AdoptionThe use of Precision Agriculture (PA) technologies and techniques continues to expand in Australia. The Society of Precision Agriculture Australia (SPAA) has been instrumental in driving the adoption and development of these techniques to support industry and Australian farming communities. SPAA supports innovation, and innovation includes people. Founded in 2002, SPAA, a not for profit extension body, is Australia’s only dedicated farming group communicating and advocating fo... N.F. Dimos, J.K. Koch |
68. Utilizing GPS Technology and Science to Improve Digital Literacy Among Students in Australia and the United States of AmericaA key issue facing regional, rural and remote communities, in both Australia and the United States of America (USA), is the low level of digital literacy among some cohorts of students. This is particularly the case for students involved in agricultural studies where it is commonly perceived that digital literacy is not relevant to their future occupation. However, this perception is far from the truth, as the reality of farming today means students who intend on entering the agricultural wor... C.W. Knight, A. Cosby, M. Trotter |
69. Creating Thematic Maps and Management Zones for Agriculture FieldsThematic maps (TMs) are maps that represent not only the land but also a topic associated with it, and they aim to inform through graphic symbols where a specific geographical phenomenon occurs. Development of TMs is linked to data collection, analysis, interpretation, and representation of the information on a map, facilitating the identification of similarities, and enabling the visualization of spatial correlations. Important issues associated with the creation of TMs are: selection of the... E. Souza, K. Schenatto, C. Bazzi |
70. Data Power: Understanding the Impacts of Precision Agriculture on Social RelationsPrecision agriculture has been greatly promoted for the potential of these technologies to sustainably intensify food production through increasing yields and profits, decreasing the environmental impacts of production, and improving food safety and transparency in the food system through the data collected by precision agriculture technologies. However, little attention has been given to the potential of these technologies to impact social relations within the agricultural industry.&nb... E. Duncan, E. Fraser |
71. Harness the Power of the Internet to Improve YieldIt’s rare to find a fertile farm or ranch that has complete cellular coverage across the entirety of its property. Because networking options like Wi-Fi are limited by restricted infrastructure in these areas, maintaining a reliable flow of connectivity is difficult. Yet, even if consistent cellular coverage is available, it’s frequently cost prohibitive for farm monitoring. Similarly, alternate wireless devices that require batteries aren’t practical because of high mainten... M. Finegan, D. Wallace |
72. Tracking Two Decades of Precision Agriculture Through the Croplife Purdue SurveyThe CropLife/Purdue University precision dealer survey is the longest-running continuous survey of precision farming adoption. The 2017 survey is the 18th, conducted every year from 1997 to 2009, and then every other year following. For individuals working in agriculture there is great value in knowing who is doing what and why, to get a better understanding of the utilities and applications, and to guide investments. A major revision in survey questions was m... B. Erickson, J. Lowenberg-deboer, J. Bradford |
73. Exploring Wireless Sensor Network Technology in Sustainable Okra Garden: A Comparative Analysis of Okra Grown in Different Fertilizer TreatmentsThe goal of this project was to explore commercial agricultural and irrigation sensor kits and to discern if the commercial wireless sensor network (WSN) is a viable tool for providing accurate real-time farm data at the nexus of food energy and water. The smart garden consists of two different varieties of Abelmoschus esculentus (okra) planted in raised beds, each grown under two different fertilizer treatments. Soil watermark sensors were programed to evaluate soil moisture and dictate irri... L. Burton, K. Jayachandran, S. Bhansali, Y. Mekonnen, A. Sarwat |
74. Precision Agriculture: A Paradigm Shift for Espousal of Advanced Farming Practices Among Progressive Farmers in Punjab –PakistanPrecision agriculture provides innovative farm information tools for improved decision making regarding crop growth and yield. Creating awareness for future applications of precision agriculture among progressive farmers in Pakistan was an instrumental force to conduct this study. The purpose was to appraise the awareness level of the respondents for applications of precision agriculture in the field. The objectives such as assessing the awareness level, available information sources, future ... E. Ashraf, H.K. Shurjeel, R. Rasheed |
75. Constraint of Data Availability on the Predictive Ability of Crop Response Models Developed from On-farm ExperimentationDue to the variability between fields and across years, on-farm experimentation combined with crop response modeling are crucial aspects of decision support systems to make accurate predictions of yield and grain protein content in upcoming years for a given field. To maximize accuracy of models, models fit using environmental covariate and experimental data gathered up to the point that crop responses (yield/grain protein) are fit repeatedly over time until the model can predict future crop ... P. Hegedus, B. Maxwell |
76. Use of Precision Technologies to Conduct Successful Within-field, On-farm TrialsPerforming randomized replicated trials in row crop field environments has the potential to increase crop production in environmentally sustainable ways. Successful implementation requires an understanding of implement capabilities and sources of potential systematic error, including operator error. Equipment capabilities can be thought of as a series of several critical “links in a chain,” each with implications that propagate downstream. We will... M. Stelford, A. Krmenec |
77. Soil and Crop Factors to Site-specific Nitrogen Management on Sugarcane FieldsNitrogen (N) is one of the most widely used fertilizers in crops and the most harmful to the environment. The increase fertilizers consumption, mainly N sources (one of the most widely fertilizer used in sugarcane fields), is one of the main factors underlying the sustainability of the entire production process. Currently, N recommendations in sugarcane are based only on the expected yield. However, there is little agronomic support for nitrogen (N) recommendations based on expected yield, de... G.M. Sanches, R. Otto, F.R. Pereira |
78. Precision Application of Seeding Rates for Weed and Nitrogen Management in Organic Grain SystemsIn a time of increasing ecological awareness, organic agriculture offers sustainable solutions to many of the polluting aspects of conventional agriculture. However, without synthetic inputs, organic agriculture faces unique challenges such as weed control and fertility management. Precision Agriculture (PA) has been used to successfully increase input use efficiency in conventional systems and now offers itself as a potential tool for organic farmers as well. PA enables on farm experimentati... S. Loewen, B.D. Maxwell |
79. Modulated On-farm Response Surface Experiments with Image-based High Throughput Techniques for Evidence-based Precision AgronomyAgronomic research is vital to determining optimum inputs for crops to perform profitably at a local scale. However, the small-plot experiment validity is often uncertain due to on-farm variations. Furthermore, the likelihood of conducting a fully randomized trial at a local farm is low given various practical and technical challenges. We propose a new methodology with many inputs to allow for a response surface that fits the yield response to the input levels with higher accuracy to make on-... A.U. Attanayake, E.U. Johnson, H.U. Duddu, S.U. Shirtliffe |
80. Where to Put Treatments for On-farm ExperimentationOn-farm experimentation has become more and more popular due to advancements in technology. These experiments are not as costly as before, as current machinery can allocate different levels of treatment to specific plots. The main goal of this kind of experiment is to obtain a site-specific nutrient level. The yield behavior is different based on the researcher’s treatment. One unanswered question for on-farm experimentation is how the treatments should be allocated in the first place s... D. Poursina, W. Brorsen |
81. Spatial and Temporal Factors Impacting Incremental Corn Nitrogen Fertilier Use EfficiencyCurrent tools for making crop N fertilizer recommendations are primarily based on plot and field studies that relate the recommendation to the economic optional N rate (EONR). Some tools rely entirely on localized EONR (e.g., MRTN). In recent years, tools have been developed or adapted to account for within-field variation in crop N need or variable within season factors. Separately, attention continues to elevate for how N fertilizer recommendations might account for environmenta... N.R. Kitchen, C.J. Ransom, J.S. Schepters, J.L. Hatfield, R. Massey |
82. Enhancing NY State On-farm Experimentation with Digital AgronomyAgriculture is putting pressure on the ecosystems and practices need to evolve towards a more sustainable way of producing food. Industrial agriculture has imposed a unique production model on the ecosystems while it is now understood that it is more sustainable to adapt the production model to the ecosystem. This involves adapting existing solutions to the local agricultural context and developing new solutions that are best suited to the local ecosystem. Farmers are doing this by conducting... L. Longchamps |
83. Evaluating a Satellite Remote Sensing and Calibration Strip-based Precision Nitrogen Management Strategy for Corn in Minnesota and IndianaPrecision nitrogen (N) management (PNM) aims to match N supply with crop N demand in both space and time and has the potential to improve N use efficiency (NUE), increase farmer profitability, and reduce N losses and negative environmental impacts. However, current PNM adoption rate is still quite low. A remote sensing and calibration strip-based PNM strategy (RS-CS-PNM) has been developed by the Precision Agriculture Center at the University of Minne... K. Mizuta, Y. Miao, A.C. Morales, L.N. Lacerda, D. Cammarano, R.L. Nielsen, R. Gunzenhauser, K. Kuehner, S. Wakahara, J.A. Coulter, D.J. Mulla, D. . Quinn, B. Mcartor |
84. Nitrogen Fertilization of Potato Using Management Zone in Prince Edward Island, CanadaPotato is sensible to nitrogen (N) and optimal N fertilization improve the tuber yield and its quality. Potato crop N response varies widely within fields. It is also well recognized that significant spatial and temporal variation in soil N availability occurs within crop fields. However, uniform application of N fertilizer is still the most common practice under potato production. Management zone (MZ) approach can help growers to achieve a part of this. The goal of the project is to compare ... A. Cambouris, M. Duchemin, N. Ziadi |
85. Evaluating the Potential of Improving In-season Nitrogen Status Diagnosis of Potato Using Leaf Fluorescence Sensors and Machine LearningPrecision nitrogen (N) management is particularly important for potato crops due to their high N fertilizer demand and high N leaching potential caused by their shallow root systems and preference for coarse-textured soils. Potato farmers have been using a standard lab analysis called petiole nitrate-N (PNN) test as a tool to diagnose potato N status and guide in-season N management. However, the PNN test suffers from many disadvantages including time constraints, labor, and cost of analysis.... S. Wakahara, Y. Miao, S. Gupta, C. Rosen, K. Mizuta, J. Zhang, D. Li |
86. Nitrogen Status Prediction on Pasture Fields Can Be Reached Using Visible Light UAV Data Combined with Sentinel-2 ImageryPasture fields under integrated crop-livestock system usually receive low or no nitrogen fertilization rates, since the expectation is that nitrogen demand will be provided by the soybean remaining straw cropped previously. However, keeping nitrogen at suitable levels in the entire field is the key to achieving sustainability in agricultural production systems. In this sense, remote sensing technologies play an essential role in nitrogen monitoring in pastures and crops. With the launch of th... F.R. Pereira, J.P. Lima, R.G. Freitas, A.A. Dos reis, L.R. Amaral, G.K. Figueiredo, R.A. Lamparelli, J.C. Pereira, P.S. Magalhães |
87. Variable Rate Nitrogen Approach in a Potato-wheat-wheat Cropping SystemNitrogen application in agriculture is a vital process for optimal plant growth and yield outcomes. Different factors such as topography, soil properties, historical yield, and crop stress affect nitrogen (N) needs within a field. Applying variable N within a field could improve precision agriculture. Optimal N management is a system that involves applying a conservative variable base rate at or shortly after planting followed by in-season assessment and, if needed, variable rate application&... E.A. Flint, M. Yost, B.G. Hopkins |
88. Evaluation of Nitrogen Recommendation Tools for Winter Wheat in NebraskaAttaining both high yield and high nitrogen (N) use efficiency (NUE) simultaneously remains a current research challenge in crop production. Digital ag technologies for site-specific N management have been demonstrated to improve NUE. This is due to the ability of digital technologies to account for the spatial and temporal distribution of crop N demand and available soil N in the field which varies greatly according t... J. Cesario pereira pinto, L. Thompson, N. Mueller, T. Mieno, G. Balboa, L. Puntel |
89. Limitations of Yield Monitor Data to Support Field-scale ResearchPrecision agriculture adoption on farms continues to grow globally on farms. Today, yield monitors have become standard technologies on grain, cotton and sugarcane harvesters. In recent years, we have seen industry and even academics leveraging the adoption of precision agriculture technologies to conduct field-scale, on-farm research. Industry has been a primary driver of the increase in on-farm research globally through the development of software to support on-farm resear... J.P. Fulton, S.A. Shearer, A. Gauci, A. Lindsey, D. Barker, E. Hawkins |
90. Nitrogen Placement Considerations for Maize Production in the Eastern US CornbeltProper fertilizer placement is essential to optimize crop performance and amount of applied nitrogen (N) along with crop yield potential. There exists several practices currently used in both research within farming operations on how and when to apply N to maize (Zea mays L). Split applications of N in Ohio is popular with farmers and provides an economic benefit but more recently some farmers have been using mid- and late-season N fertilizer applications for their maize production.&... J.P. Fulton, E. Hawkins, S. Shearer, A. Klopfenstein, J. Hartschuh, S. Custer |
91. In-season Nitrogen Management of Maize Based on Nitrogen Status and Lodging Risk PredictionDevelopment of effective precision nitrogen (N) management strategies is crucially important for food security and sustainable development. Lodging is one of the major constraints to increasing maize yield that can be induced by strong winds, and is also influenced by management practices, like N rate. When making in-season N application decisions, lodging risk should be considered to avoid yield loss. Little has been reported on in-season N management strategies that also incorporate lodging... R. Dong, Y. Miao, X. Wang |
92. Is Row-unit Vibration Affected by Planter Speeds and Downforce?Row-unit vibration is an issue created mainly by planter`s opening disks and gauge-wheels contact with the ground. Variability on row-unit vibration could interfere on seed metering and delivery process, affecting crop emergence and final stand. With the amount of embedded technology present on planters, producers are being encouraged to increase planting speeds, which is also one of the main factors for row-unit vibration increasement. In this way, knowing the proper speeds, and using other ... L.P. Oliveira, B.V. Ortiz, G.T. Morata, T. Squires, J. Jones |
93. Use of Remotely Measured Potato Canopy Characteristics As Indirect Yield EstimatorsPrediction of potato yield before harvest is important for making agronomic and marketing decisions. Active optical sensors (AOS) are rarely used together with other hand-held instruments for monitoring potato growth, including yield prediction. The aim of the research was to determine the relationship between manually and remotely measured potato crop characteristics throughout the growing season and yield in commercial potato fields. Objective was also to identify crop characteristics that ... S.M. Samborski, J. Szatylowicz, T. Gnatowski, R. Leszczyńska, M. Thornton, O. Walsh |
94. Assessment of Active Crop Canopy Sensor As a Tool for Optimal Nitrogen Management in Dryland Winter WheatOptimum nitrogen (N) fertilizer application is important for agronomic, economic, and environmental reasons. Among different N management tools, active crop canopy sensors are a recent and promising tool widely evaluated for use in corn but still under-evaluated for use in winter wheat. The objective of this study was to determine whether vegetation indices derived from in-season active crop canopy sensor data can be used to predict winter wheat grain yield and protein content and subsequentl... D. Ghimire |
95. In-season Diagnosis of Winter Wheat Nitrogen Status Based on Rapidscan Sensor Using Machine Learning Coupled with Weather DataNitrogen nutrient index (NNI) is widely used as a good indicator to evaluate the N status of crops in precision farming. However, interannual variation in weather may affect vegetation indices from sensors used to estimate NNI and reduce the accuracy of N diagnostic models. Machine learning has been applied to precision N management with unique advantages in various variables analysis and processing. The objective of this study is to improve the N status diagnostic model for winter wheat by c... J. Lu, Z. Chen, Y. Miao, Y. Li, Y. Zhang, X. Zhao, M. Jia |