Proceedings
Authors
| Filter results24 paper(s) found. |
|---|
1. Near Real-time Meter-resolution Airborne Imagery For Precision Agriculture: AerocamPrecision agriculture often relies on high resolution imagery to delineate the variability within a field. Airborne Environmental Research Observational Camera (AEROCam) was designed to meet the needs of agriculture producers, ranchers, and researchers, who require meter-solution imagery in a near real-time environment for rapid decision support. AEROCam was developed and operated through a unique collaboration... X. Zhang, C.R. Streeter, H. Kim, D.R. Olsen |
2. Evaluation Of Yield Maps Using Fuzzy IndicatorsThe ultimate goal of application of yield maps is profitable crop output in many farming systems. Yield maps are the starting point in the precision farming system, and provide the final record indicating the effectiveness of any management changes. Researches on yield mapping shown, that positions and boundaries of zones with different levels of... E. Krueger shvetsova, D. Kurtener, D. Kurtener, H. Torbert |
3. Apparent Electrical Conductivity Calibration In Semiarid Soils: Ion-pair CorrectionThe electromagnetic induction sensor (EM38DD) is a field proven portable sensor for rapid measurement of the apparent electrical conductivity (ECa) of soils. Calibration with the electrical conductivity of saturation paste extracts is the most widely used method to correlate ECa with the effective electrical conductivity (ECe). A drawback of this method is the formation of ion pairs in the high ionic strength saturated paste extracts, which effectively decreases the measured ECe, leading to the... X. Amakor, A.R. Jacobson, G.E. Cardon, A. Hawks, W. Barnes |
4. Effect Of Nitrogen Application Rate On Soil Residual N And Cotton YieldA long-term study was conducted on nitrogen application rate and its impact on soil residual nitrogen and cotton (FM960B2RF) lint yield under a drip irrigation production system near Plainview, Texas. The experiment was a randomized complete block design with five nitrogen application rates (0, 56, 112, 168 and 224 kg per ha) and five replications. The soil nitrogen treatment was applied as side dressing. Cotton yield, leaf N, seed N, soil residual nitrate, amount of irrigation, and rainfall data... M. Parajulee, D. Neupane, C. Wang, S. Carroll, R. Shrestha |
5. On-Farm Trials Using Precision Ag in Northeast LouisianaThe availability of yield monitors and precision application equipment on producers’ farms have made it much easier for researchers to take the results from experiment station trials and apply them to producers’ fields. Treatments/methods are applied in strips, by prescription, embedded plots or in combination. Fields are divided into zones for analyzing the harvest yield data. These can include soil type, soil Ec, or other criteria. Treatments are analyzed... D. Burns, D. Overstreet, D. Kruse, R. Frazier, D. Blanche |
6. Effect of Urea Application through Drip Irrigation on Yield, Water and Nitrogen Use Efficiency of Summer Bitter GourdBitter gourd (Momordica charantia L.) is one of the important vegetable crops grown during summer months in high lands of Lower Gangetic Plains. Crop is very much responsive to water and nutrient but water is limiting in dry summer months. Farmers generally adopt furrow irrigation and hand watering with pitcher for growing this crop. Drip irrigation is... S. Goswami, S. Saha |
7. Climatological Diagnostic Analysis: A Case Study for Parbhani District in Marathwada Region of India... S.N. Pawar, A.K. Gore, G.U. Shinde, M.S. Pendke |
8. Adoption Level Of Precision Agriculture For Brazilian Farmers - 2011/12 Crop YearAlthough Precision Agriculture (PA) concepts and technologies are widespread in Brazil, its application still little used in some important crop production regions. The purpose of this study was to survey the current adoption level of PA by printed and online questionnaire. We started making a specific questionnaire to farmers and PA service companies using some technology related to PA. The questionnaires were developed based on the methodology of Whipker and Akridge (2009),... E. Borghi, A. Luchiari junior, L. Bortolon, E.S. Bortolon, R.Y. Inamasu, A.C. Bernardi, J.C. Avanzi |
9. Strategies For Scientific Communication Of Precision Agriculture In BrazilScientific knowledge popularization is the way to the society access technical scientific advances. The challenge is to increase the means, channels and processes of information and relationship with society and decode scientific issues into a format that makes knowledge accessible. The Embrapa Precision Agriculture Network has been used scientific communication strategies at the traditional and new media, as a way of approach with various stakeholders, contributing to the construction... C.V. fragalle, J.C. Silva, E.P. fragalle, R.Y. Inamasu, A.C. Bernardi |
10. Spatial Variability Of Soil Properties And Yield Of An Alfalfa Pasture Under Grazing In BrazilAlfalfa is extremely demanding in fertility, and an adequate supply of nutrients is important for forage production and is essential to maintain high forage quality and profitable yields. Tropical acid soils are naturally poor in plant nutrients, therefore, soil liming and balanced nutrient supply essential to ensure high yields and high alfalfa forage quality. The knowledge of soil properties spatial variability and forage yield is useful for the rational use of inputs, as in the variable... A. Bernardi |
11. Precision Agriculture Use In Selected Agricultural Regions In BrazilInvestment in technology brought Brazil to the position among the top agricultural producers in the world. Brazilian agricultural production has increased drastically as a result of productivity growth instead expansion in area. In this scenario the use of Precision Agriculture (PA) in the farm management, considering the spatial variability for maximizing economic return and minimizing the risk of damage to the environment can be decisive. However, the adoption of PA by Brazilian... R.Y. Inamasu, A.C. Bernardi |
12. Optical Sensors To Predict Nitrogen Demand By SugarcaneThe low effectiveness of nitrogen (N) from fertilizer is a substantial concern in worldwide which has been threatening the sustainability of sugarcane production. The increment of nitrogen use efficiency (NUE) by sugarcane genotypes associated to the best practices of fertilizer management and nutritional diagnosis methods have higher potential to reduce environment impacts of nitrogen fertilization. Due to the difficult to determine N status in soil test as well as there is not... O.T. Kolln, G.M. Sanches, J. Rossi neto, S.G. Castro, E. Mariano, R. Otto, R. Inamasu, P.S. Magalhães, O.A. Braunbeck, H.C. Franco |
13. Research On Measurement Device For NO3- Ion Concentration Of Nutrient SolutionThe management of water and ion concentration in nutrient solution is crucial in precision agriculture. Poor management may leads to the increasing of energy consumption and cost as well as low efficiency. The measurement of ion concentration in nutrient solution is prerequisite for optimal control and management of nutrient solution. Real-time detection of NO3-, as an important component of nitrogenous fertilizer, is always a big problem over the world. The... X. Zhang, Y. Li, K. Xu, X. Sun |
14. Intuitive Image Analysing on Plant Data - High Throughput Plant Analysis with Lemnatec Image ProcessingFor digital plant phenotyping huge amounts of 2D images are acquired. This is known as one part of the phenotyping bottleneck. This bottleneck can be addressed by well-educated plant analysts, huge experience and an adapted analysis software. Automated tools that only cover specific parts of this analysis pipeline are provided. During the last years this could be changed by the image processing toolbox of LemnaTec GmbH. An automated and intuitive tool for the automated analysis of huge amounts... S. Paulus, T. Dornbusch, M. Jansen |
15. Rationale for and Benefits of a Community for On-Farm Data SharingMost data sets for evaluating crop production practices have too few locations and years to create reliable probabilities from predictive analytical analyses for the success of the practices. Yield monitors on combines have the potential to enable networks of farmers in collaboration with scientists and farm advisors to collect sufficient data for calculation of more reliable guidelines for crop production showing the probabilities that new or existing practices will improve the efficiency of... T. Morris, N. Tremblay, P.M. Kyveryga, D.E. Clay, S. Murrell, I. Ciampitti, L. Thompson, D. Mueller, J. Seger |
16. Development of a Small Tracking Device for Cattle Using IoT TechnologyThe US is the largest producer of beef in the world. Last year alone, it produces nearly 19% of the world’s beef. This translate to about almost $90 billion in economic impact in the country. Aside from being a producer, the US also consumed more than 26 billion pounds of beef which have a retail value of the entire beef industry to more than $74B. For this level of production and consumption, each rancher in the US must produce a herd size of at least 100 or more to sustain the current... J.M. Maja, A.K. Blocker, E.G. Stuckey, S.G. Sell, G. Tuttle, J. Mueller, J. Andrae |
17. Effect of Irrigation Scheduling Technique and Fertility Level on Corn Yield and Nitrogen MovementFlorida has more first magnitude springs that anywhere in the world. Most of these are located in north Florida where agricultural production is the primary basis for the economy. Irrigated corn has become a popular part of the crop rotation in recent years. This project is a study of a corn and peanut rotation investigating Best Management Practices (BMPs) of nitrogen fertility level (336, 246, 157 kg/ha) and irrigation strategies as follows: (i) GROW, mimicking grower’s practices,... M. Dukes, M. Zamora, D. Rowland |
18. Implementation of a CAN Bus System to Monitor Hydroponic SystemsControlled Area Network (CAN) bus systems designed for greenhouse monitoring have been proposed to measure soil moisture content, yet they are still absent from hydroponic systems. In this study, irrigation control, monitoring of substrate moisture levels and temperature were achieved using a CAN bus system connected to hydroponic beds. In total, five nodes were mounted on five hydroponic beds and two irrigation methods were compared on lettuce and kale: first, where a pre-set timer activated... P. Tikasz, R.M. Buelvas, M. Lefsrud, V. Adamchuk |
19. Development of a Machine Vision Yield Monitor for Shallot Onion HarvestersCrop yield estimation and mapping are important tools that can help growers efficiently use their available resources and have access to detailed representations of their farm. Technical advancements in computer vision have improved the detection, quality assessment and yield estimation processes for crops, including apples, citrus, mangoes, maize, figs and many other fruits. However, similar methods capable of exporting a detailed yield map for vegetable crops have not yet been fully developed.... A.A. Boatswain jacques, V.I. Adamchuk, G. Cloutier, J.J. Clark, C. Miller |
20. Yield Analysis in Sugarcane Harvesters Using Design of Experiments (DoE) MethodologyThe sugarcane crop is highlighted in national agribusiness, Brazil is the world’s largest producer of the plant, and the prospection of specialists is of strong growth for the next years. However, in order to increase productivity, technological interventions through of precision agriculture must be implemented. Among them, the management of inputs guided by yield spatial variability for otmizing production and income. This project approaches the implementation of the methodology of analysis... M.L. Da silva, J. . Alves de lima, A. Balbinot, J.P. Molin |
21. Incorporating Return on Investment for Profit-driven Management ZonesAdopting site-specific management practices such as profitability zones can help to stabilize long-term profit while also favoring the environment. Profitability maps are used to standardize data by converting variables into economic values ($/ha) for different cropping systems within a field. Thus, profitability maps can be used to define management zones from several years of data and show the regions within a field which are more profitable to invest in for production, or those that can be... A.A. Boatswain jacques, A.B. Diallo, A. Cambouris, E. Lord, E. Fallon |
22. Deep Learning for Predicting Yield Temporal Stability from Short Crop RotationsInvestigating the temporal stability of yield in management zones is crucial for both producers and researchers, as it helps in mitigating the adverse impacts of unpredictable disruptions and weather events. The diversification of cropping systems is an approach which leads to reduced variability in yield while improving overall field resilience. In this six-year study spanning from 2016 to 2021, we monitored 40 distinct fields owned by 10 producers situated in Quebec, Canada. These... E. Lord, A.A. Boatswain jacques, A.B. Diallo, M. Khakbazan, A. Cambouris |
23. Can Soil Fertility Data and Topography Predict Yield Stability Zones for Corn Fields in New York?Yield monitor systems play a vital role in precision agriculture given their ability to capture and map within-field yield variability. When three or more years of yield data are available, yield stability zone maps can be generated to show both the spatial and temporal variability of yield within a field. Based on the farm’s overall temporal mean and standard deviation for a specific crop, we can classify areas in the field as consistently high- (Q1) or low-yielding (Q4), and variably high-... M. Marcaida, X. Zhang, S. Srinivasagan, S. Shajahan, Q. Ketterings |
24. Single-strip Spatial Evaluation Approach: a Simplified Method for Enhanced Sustainable Farm ManagementOn-farm experimentation (OFE) plays a pivotal role in evaluating and validating the effectiveness of agricultural practices and products. The results of OFE enable farmers to act and make changes that can enhance the farm’s economic and environmental sustainability. Experimental designs can be a barrier to the adoption of OFE. The conventional approach often involves randomized complete block designs with 3 to 5 replications in the field, which can be space-intensive and disrupt workflow... S. Srinivasagan, Q. Ketterings, M. Marcaida, S. Shajahan, J. Ramos-tanchez, J. Cho, , L. Thompson, J. Guinness, R. Goel |