Proceedings
Authors
| Filter results22 paper(s) found. |
|---|
1. Cotton Precision Farming Adoption In The Southern United States: Findings From A 2009 SurveyThe objectives of this study were 1) to determine the status of precision farming technology adoption by cotton producers in 12 states and 2) to evaluate changes in cotton precision farming technology adoption between 2000 and 2008. A mail survey of cotton producers located in Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, Missouri, North Carolina, South Carolina, Tennessee, Texas and Virginia was conducted in February and March of 2009 to establish the use of precision farming technologies... M. Velandia, D.F. Mooney, R.K. Roberts, B.C. English, J.A. Larson, D.M. Lambert, S.L. Larkin, M.C. Marra, R. Rejesus, S.W. Martin, K.W. Paxton, A. Mishra, C. Wang, E. Segarra, J.M. Reeves |
2. Adoption And Perceived Usefulness Of Precision Soil Sampling Information In Cotton ProductionSoil testing assists farmers in identifying nutrient variability to optimize input placement and timing. Anecdotal evidence suggests that soil test information has a useful life of 3–4 years. However, perceived usefulness may depend on a variety of factors, including field variability, farmer experience and education, farm size, Extension, and factors indirectly related to farming. In 2009, a survey of cotton farmers in 12 Southeastern states collected information... D.C. Harper, D.M. Lambert, B.C. English, J.A. Larson, R.K. Roberts, M. Velandia, D.F. Mooney, S.L. Larkin |
3. Precision Nitrogen Management and Global Nitrogen Use EfficiencyTraditionally, nitrogen (N) fertilizers have been applied uniformly across entire field while ignoring inherent spatial variation in crop N needs across crop fields. This results in either too little or too much application of N in various parts of the fields.... M. Gupta, R. Khosla |
4. Factors Influencing the Timing of Precision Agriculture Technology Adoption in Southern U.S. Cotton ProductionTechnology innovators in cotton production adopted precision agriculture (PA) technologies soon after they became commercially available, while others adopted these technologies in later years after evaluating the success of the innovators. The timing of... D.M. Lambert, J.A. Larson, B.C. English, R.M. Rejesus, M.C. Marra, A.K. Mishra, C. Wang, P. Watcharaanantapong, R.K. Roberts, M. Velandia |
5. The Adoption of Information Technologies and Subsequent Changes in Input Use in Cotton ProductionThe use of precision farming has become increasingly important in cotton production. It allows farmers to take advantage of knowledge about infield variability by applying expensive inputs at levels appropriate to crop needs. Essential to the success of the precision... N.M. Thompson, J.A. Larson, B.C. English, D.M. Lambert, R.K. Roberts, M. Velandia, C. Wang |
6. Spatial-temporal Evaluation of Plant Phenotypic Traits Via Imagery Collected by Unmanned Aerial Systems (UAS)Unmanned aerial systems (UAS) and a stereovision approach were implemented to generate a 3D reconstruction of the top of the canopy. The 3D reconstruction or CSM (crop surface model) was utilized to evaluate biophysical parameters for both spatial- and temporal-scales. The main goal of the project was to evaluate sUAVs technology to assist plant height and biomass estimation. The main outcome of this process was to utilize CSMs to gain insights in the spatial-temporal dynamic of plants within... S. Varela, G. Balboa, V. Prasad, T. Griffin, I. Ciampitti, A. Ferguson |
7. Measuring Pasture Mass and Quality Indices Over Time Using Proximal and Remote SensorsTraditionally pasture has been measured or evaluated in terms of a dry matter yield estimate, which has no reference to other important quality factors. The work in this paper measures pasture growth rates on different slopes and aspects and pasture quality through nitrogen N% and metabolizable energy and ME concentration. It is known that permanent pasture species vary greatly in terms of quality and nutritional value through different stages of maturity. Pasture quality decreases as grass tillers... I.J. Yule, M.C. Grafton, L.A. Willis, P.J. Mcveagh |
8. Spatial-temporal Evaluation of Plant Phenotypic Traits Via Imagery Collected by Unmanned Aerial Systems (UAS)Unmanned aerial systems (UAS) and a stereovision approach were implemented to generate a 3D reconstruction of the top of the canopy. The 3D reconstruction or CSM (crop surface model) was utilized to evaluate biophysical parameters for both spatial- and temporal-scales. The main goal of the project was to evaluate sUAVs technology to assist plant height and biomass estimation. The main outcome of this process was to utilize CSMs to gain insights in the spatial-temporal dynamic of plants within... S. Varela, G. Balboa, V. Prasad, T. Griffin, I. Ciampitti, A. Ferguson |
9. Knowledge, Skills and Abilities Needed in the Precision Ag Workforce: an Industry SurveyPrecision agriculture encompasses a set of related technologies aimed at better utilization of crop inputs, increasing yield and quality, reducing risks, and enabling information flow throughout the crop supply and end-use chains. The most widely adopted precision practices have been automated systems related to equipment steering and precise input application, such as autoguidance and section controllers. Once installed, these systems are relatively easy for farmers and their supporting... B. Erickson, D.E. Clay, S.A. Clay, S. Fausti |
10. Application of Radio Frequency Identification Technology in Agriculture: a Case with Dragon FruitGlobal and local concerns about food safety are turning food traceability into a trade requirement. Typically, a Food Traceability Scheme (FTS) discloses information about food production and its distribution process. A reliable FTS will increase consumer trust in the quality and safety of farm produce. In Malaysia, dragon fruit is a profitable commodity that is growing in export value. Hence, dragon fruit is an excellent candidate for FTS solution development. ... S.K. Balasundram, M.H. Husni |
11. Managing Soil Moisture on Turf Grass Using a Portable Wave ReflectometerThe agronomic needs of grass pose many challenges to managing irrigation on golf greens and lawns. Superintendents must keep putting greens as dry and firm as possible without allowing them to die. Commercial and residential landscapes are expected to look lush and green. But soil moisture has high spatial variability, including hot spots that can rapidly become critically low in available water. One common method of measuring soil moisture is to take core samples and assess moisture content by... D.L. Kieffer, T.S. O'connor |
12. Thermal Characterization and Spatial Analysis of Water Stress in Cotton (Gossypium Hirsutum L.) and Phytochemical Composition Related to Water Stress in Soybean (Glycine Max)Studies were designed to explore spatial relationships of water and/or heat stress in cotton and soybeans and to assess factors that may influence yield potential. Investigations focused on detecting the onset of water/heat stress in row crops using thermal and multispectral imagery with ancillary physicochemical data such as soil moisture status and photosynthetic pigment concentrations. One cotton field with gradations in soil texture showed distinct patterns in thermal imagery, matching patterns... S.J. Thomson, S.L. Defauw, P.J. English, J.E. Hanks, D.K. Fisher, P.N. Foster, P.V. Zimba |
13. Yield Assessment of a 270 000 Plant Perennial Ryegrass Field Trial Using a Multispectral Aerial Imaging PlatformCurrent assessment of non-destructive yield in forage breeding programs relies largely on the visual assessment by experts, who would categorize biomass to a discrete scale. Visual assessment of biomass yield has inherent pitfalls as it can generate bias between experimental repeats and between different experts. Visual assessment is also time-consuming and would be impractical on large-scale field trials. A method has been established to allow for a rapid, non-destructive assessment of biomass... P.E. Badenhorst, A. Phelan |
14. Use of Proximal Soil Sensing to Delineate Management Zones in a Commercial Potato Field in Prince Edward Island, CanadaManagement zones (MZs) are delineated areas within an agricultural field with relatively homogenous soil properties. Such MZs can often be used for site-specific management of crop production inputs. The purpose of this study was to determine the efficiency of two proximal soil sensors for delineating MZs in an 8.1-ha commercial potato (Solanum tuberosum L.) field in Prince Edward Island (PEI), Canada. A galvanic contact resistivity sensor (Veris-3100 [Veris]) and electromagnetic induction sensors... A. Cambouris, A. Lajili, K. Chokmani , I. Perron, V. Adamchuk, A. Biswas , B. Zebrath |
15. Detection and Monitoring the Risk Level for Lameness and Lesions in Dairy Herds by Alternative Machine-Learning AlgorithmsMachine-learning methods may play an increasing role in the development of precision agriculture tools to provide predictive insights in dairy farming operations and to routinely monitor the status of dairy cows. In the present study, we explored the use of a machine-learning approach to detect and monitor the welfare status of dairy herds in terms of lameness and lesions based on pre-recorded farm-based records. Animal-based measurements such as lameness and lesions are time-consuming, expensive... D. Warner, R. Lacroix, E. Vasseur, D. Lefebvre |
16. Usage of Milk Revenue Per Minute of Boxtime to Assess Cows Selection and Farm Profitability in Automatic Milking SystemsThe number of farms implementing robotic milking systems, usually referred as automatic milking systems (AMS), is increasing rapidly. AMS efficiency is a priority to achieve high milk production and higher incomes from dairy herds. Recent studies suggested that milkability (i.e., amount of milk produced per total time spent in the AMS [kg milk/ minute of boxtime]) could be used for as a criteria for genetic evaluations. Therefore, an indicator of milkability was developed, which combines economical... L. Fadul-pacheco, G. Bisson, R. Lacroix, M. Séguin, R. Roy, E. Vasseur, D. Lefebvre |
17. Characterization of Soil Properties, Nutrient Distribution and Rice (Oryza Sativa.) Productivity As Influenced by Tillage Methods in a Typical GleysolsGlobal emphasis and interest in conservation Tillage in agricultural soils has tremendously increased in the last few years, especially no tillage with its potential to improve soil physicochemical properties, reduce nutrient leaching as well as improve crop productivity in a more sustainable manner. Several questions still exist with regard to the true role of no tillage in improving soil fertility. A two year field study was conducted to characterize the effects of different tillage methods... F. Issaka, L. Yongtao, L. Jiuhao, M.M. Buri, E. Asenso, A. Sheka kanu, Z. Zhao |
18. Tracking Two Decades of Precision Agriculture Through the Croplife Purdue SurveyThe CropLife/Purdue University precision dealer survey is the longest-running continuous survey of precision farming adoption. The 2017 survey is the 18th, conducted every year from 1997 to 2009, and then every other year following. For individuals working in agriculture there is great value in knowing who is doing what and why, to get a better understanding of the utilities and applications, and to guide investments. A major revision in survey questions was made... B. Erickson, J. Lowenberg-deboer, J. Bradford |
19. Development of an Online Decision-Support Infrastructure for Optimized Fertilizer ManagementDetermination of an optimum fertilizer application rate involves various influential factors, such as past management, soil characteristics, weather, commodity prices, cost of input materials and risk preference. Spatial and temporal variations in these factors constitute sources of uncertainties in selecting the most profitableapplication rate. Therefore, a decision support system (DSS) that could help to minimize production risks in the context of uncertain crop performance is needed. This... S. Shinde, V. Adamchuk, R. Lacroix, N. Tremblay, Y. Bouroubi |
20. Global Adoption of Precision Agriculture: an Update on Trends and Emerging TechnologiesThe adoption of precision agriculture (PA) has been mixed. Some technologies (e.g., Global Navigation Satellite System (GNSS) guidance) have been adopted rapidly worldwide wherever there is mechanized agriculture. Adoption of some of the original PA technologies introduced in the 1990s has been modest almost everywhere (e.g., variable rate fertilizer). New and more advanced technologies based on robotics, uncrewed aerial vehicles (UAVs), machine vision, co-robotic automation, and artificial intelligence... J. Mcfadden, B. Erickson, J. Lowenberg-deboer, G. Milics |
21. A Fusion Strategy to Map Corn Crop ResiduesAccess to post-harvest residue coverage information is crucial for agricultural management and soil conservation. The purpose of this study was to present a new approach based on an ensemble at the decision level for mapping the corn residue. To this end, a set of Landsat 8 imagery and field data including the Residue Cover Fraction (RCF) of corn (149 samples), were used. Firstly, a map of common spectral indices for RCF modeling was prepared based on the spectral bands. Then, the efficiency of... S. Fathololoumi, M.K. Firozjaei, A. Biswas, P. Daggupati |
22. Machine Learning Model to Predict Total Nozzle Volume Delivery for Pulse Width Modulated Flow ControllersProduct flow rate in the Pulse Width Modulation (PWM) variable rate technologies depends on the duty cycle. However, the actual product flow rate at any duty cycle depends on pressure rise, stable pressure during the cycle, fall time and pressure drop across the nozzle body. The current controller does not consider the pressure drops and the estimation of actual flow during each cycle at any duty cycle cannot be estimated with capturing high-frequency pressure data. Knowledge of volume delivery... S. Dua, A. Sharda |