Proceedings
Authors
| Filter results6 paper(s) found. |
|---|
1. Economic Analysis Of Auto-swath Control For Alabama Crop ProductionWith the rising costs of fertilizer and pesticides and a push towards increasing environmental stewardship, farmers are seeking means to save money while preserving the environment and wildlife habitat. One technology that aids in remedying these concerns is auto-swath control. This investigation evaluates overlap savings using this technology on different application equipment and resulting in economic savings for those adopting it. Several field boundaries were obtained from across the state... D. Mullenix, A.M. Troesch, J.P. Fulton, A.T. Winstead, S.H. Norwood |
2. Tip Flow Uniformity When Using Different Automatic Section Control Technologies During Field OperationsAutomatic section control (ASC) technology provides a means to reduce double-coverage and application in unwanted areas thereby leading to input savings and improved environmental stewardship. However, the impact of ASC on spray boom dynamics and tip flow uniformity are unknown. Therefore, a study was conducted to evaluate tip flow rate uniformity and control system response in maintaining target application rates during field operation. Field experiments were conducted using two self-propelled... A. Sharda, J.D. Luck, J.P. Fulton, S.A. Shearer, T.P. Mcdonald, D. Mullenix |
3. Application Rate Stability When Implementing Automatic Section Control Technology On Agricultural SprayersAutomatic section control (on and off) technology of sprayer boom sections is an intelligent solution to maximize spray application efficiency during field operations. This technology can reduce over-application of products. Spray controllers available with this technology attempt to maintain the set target rate by adjusting system flow rate based on ground speed and application width. Therefore, as sections are turned on or off, the flow regulating hardware must respond to maintain... A. Sharda, J.D. Luck, J.P. Fulton, S.A. Shearer, S.A. Shearer, D. Mullenix, M. Vanacht |
4. Crop Water Stress Mapping for Site Specific Irrigation by Thermal Imagery and Artificial Reference SurfacesVariable rate irrigation machines or solid set systems have become technically feasible; however, crop water status mapping is necessary as a blueprint to match irrigation quantities to site-specific crop water demands. Remote thermal sensing can provide these maps in sufficient detail and at a timely delivery. In a set of aerial and ground scans at the Hula Valley, Israel, digital crop water stress maps were generated using geo-referenced high- resolution thermal imagery and artificial reference... M. Meron, J. Tsipris, V. Orlov, V. Alchnatis, Y. Cohen |
5. Design of Ground Surface Sensing Using RADARGround sensing is the key task in harvesting head control system. Real time sensing of field topography under vegetation canopy is very challenging task in wild blueberry cropping system. This paper presents the design of an ultra-wide band RADAR sensing, scanning device to recognize the soil surface level under the canopy structure. Requirements for software and hardware were considered to determine the usability of the ultra-wide band RADAR system.An automated head elevation... M.M. Mohamed, Q. Zaman, T. Esau, A. Farooque |
6. Harnessing Farmers’, Researchers’ and Other Stakeholders’ Knowledge and Experiences to Create Shared Value from On-farm Experimentation: Lessons from KenyaAchieving greater sustainability in farm productivity is a major challenge facing smallholder farmers in Kenya. Existing technologies have not solved the challenges around declining productivity because they are one-size-fits-all that doesn’t account for the diverse smallholder contexts. A study was carried out in Kenya by a multi-disciplinary team to assess the value of On-Farm Experimentation (OFE) to tailor technologies to local conditions. The OFE process begun with identification of... J. Muthamia, I. Adolwa, J. Mutegi, S. Zingore, S. Phillips |