Proceedings
Authors
| Filter results13 paper(s) found. |
|---|
1. Claypan Depth Effect on Soil Phosphorus and Potassium DynamicsUnderstanding the effects of fertilizer addition and crop removal on long-term change in spatially-variable soil test P (STP) and soil test K (STK) is crucial for maximizing the use of grower inputs on claypan soils. Using apparent electrical conductivity (ECa) to estimate topsoil depth (or depth to claypan, DTC) within fields could help capture the variability and guide site-specific applications of P and K. The objective of this study was to determine if DTC derived from ECa... L. Conway, M. Yost, N. Kitchen, K. Sudduth, B. Myers |
2. High Capacity System for Precision Agriculture Reconnaissance and IntelligenceIcaros-Demeter has developed a lightweight, compact remote sensing system with a potential for producing 100,000 acre (400km-2) thematic maps per day with high resolution digital RGB/CIR CMOS sensors. The Icaros- Demeter system enables fast, precise location of multiple area and spots types. The system’s ability for producing high precision Digital Surface Models (DSM) over vast areas, offers a direct method for computing agricultural biomass via volume calculations, instead of common indirect... E. Ram, M. Shechter, E. Sela |
3. Controller Performance Criteria for Sensor Based Variable Rate ApplicationSensor based variable rate application of crop inputs provides unique challenges for traditional rate controllers when compared to map based applications. The controller set point is typically changing every second whereas with a map based systems the set point changes much less frequently. As applied data files for a sensor based variable rate nitrogen applicator were obtained from a wheat field in north central Oklahoma. These data were analyzed to determine the magnitude and frequency of rate... R.K. Taylor, P. Bennur, J.B. Solie, N. Wang, P. Weckler, W.R. Raun |
4. Predicting Dry Matter Composition of Grass Clover Leys Using Data Simulation and Camera-Based Segmentation of Field Canopies into White Clover, Red Clover, Grass and WeedsTargeted fertilization of grass clover leys shows high financial and environmental potentials leading to higher yields of increased quality, while reducing nitrate leaching. To realize the gains, an accurate fertilization map is required, which is closely related to the local composition of plant species in the biomass. In our setup, we utilize a top-down canopy view of the grass clover ley to estimate the composition of the vegetation, and predict the composition of the dry matter of the forage.... S. Skovsen, M. Dyrmann, J. Eriksen, R. Gislum, H. Karstoft, R.N. Jørgensen |
5. Using a Fully Convolutional Neural Network for Detecting Locations of Weeds in Images from Cereal FieldsInformation about the presence of weeds in fields is important to decide on a weed control strategy. This is especially crucial in precision weed management, where the position of each plant is essential for conducting mechanical weed control or patch spraying. For detecting weeds, this study proposes a fully convolutional neural network, which detects weeds in images and classifies each one as either a monocot or dicot. The network has been trained on over 13 000 weed annotations... M. Dyrmann, S. Skovsen, R.N. Jørgensen, M.S. Laursen |
6. Autonomous Mapping of Grass-Clover Ratio Based on Unmanned Aerial Vehicles and Convolutional Neural NetworksThis paper presents a method which can provide support in determining the grass-clover ratio, in grass-clover fields, based on images from an unmanned aerial vehicle. Automated estimation of the grass-clover ratio can serve as a tool for optimizing fertilization of grass-clover fields. A higher clover content gives a higher performance of the cows, when the harvested material is used for fodder, and thereby this has a direct impact on the dairy industry. An android application... D. Larsen, S. Skovsen, K.A. Steen, K. Grooters, O. Green, R.N. Jørgensen, J. Eriksen |
7. Ground Vehicle Mapping of Fields Using LiDAR to Enable Prediction of Crop BiomassMapping field environments into point clouds using a 3D LIDAR has the ability to become a new approach for online estimation of crop biomass in the field. The estimation of crop biomass in agriculture is expected to be closely correlated to canopy heights. The work presented in this paper contributes to the mapping and textual analysis of agricultural fields. Crop and environmental state information can be used to tailor treatments to the specific site. This paper presents the current results... M.P. Christiansen, M.S. Laursen, R.N. Jørgensen, S. Skovsen, R. Gislum |
8. Optimizing Corn Seeding Depth by Soil Texture to Achieve Uniform StandCorn (Zea mays L.) yield potential can be affected by uneven emergence. Corn emergence is influenced by both management and environmental conditions. Varying planting depth and rate as determined by soil characteristics could help improve emergence uniformity and grain yield. This study was conducted to assess varying corn seeding depths on plant emergence uniformity and yield on fine- and coarse-textured soils. Research was conducted on alluvial soil adjacent to the Missouri river with contrasting... S. Stewart, N. Kitcken, M. Yost, L. Conway |
9. Coupling Machine Learning Algorithms and GIS for Crop Yield Predictions Based on Remote Sensing Imagery and Topographic IndicesIn-season yield prediction can support crop management decisions helping farmers achieve their yield goals. The use of remote sensing to predict yield it is an alternative for non-destructive yield assessment but coupling auxiliary data such as topography features could help increase the accuracy of yield estimation. Predictive algorithms that can effectively identify, process and predict yield at field scale base on remote sensing and topography still needed. Machine learning could be an alternative... M.F. Oliveira, G.T. Morata, B. Ortiz, R.P. Silva, A. Jimenez |
10. Multi-sensor Remote Sensing: an AI-driven Framework for Predicting Sugarcane FeedstockPredicting saccharine and bioenergy feedstocks in sugarcane enables stakeholders to determine the precise time and location for harvesting a better product in the field. Consequently, it can streamline workflows while enhancing the cost-effectiveness of full-scale production. On one hand, Brix, Purity, and total reducing sugars (TRS) can provide meaningful and reliable indicators of high-quality raw materials for industrial food and fuel processing. On the other hand, Cellulose, Hemicellulose,... M. Barbosa, D. Duron, F. Rontani, G. Bortolon, B. Moreira, L. Oliveira, T. Setiyono, L. Shiratsuchi, R.P. Silva, K.H. Holland |
11. Assess the Feasibility of Remote Sensing Vegetation Index for In-season N Status Evaluation with Nitrogen Measurement from Commercial FieldNitrogen (N) fertilization plays a crucial role in corn production in the United States. Corn, being a major commodity crop, relies heavily on N fertilization throughout its growth cycle to achieve optimal yields and maintain profitability. During this period of rapid N uptake, it's imperative for farmers to supply sufficient N at the right time to support proper crop development. However, the use of N fertilizer comes with environmental considerations as it can be susceptible to loss through... A. Nguyen, A. Sharma, R. Prasad |
12. Enhancing Precision Agriculture Through Dual Weed Mapping: Delineating Inter and Intra-row Weed Populations for Optimized Crop ProtectionIn the field of precision agriculture, effective management of weed populations is essential for optimizing crop yield and health. This paper presents an innovative approach to weed management by employing dual weed mapping techniques that differentiate between inter-row and intra-row weed populations. Utilizing advanced imaging and data analysis of CropEye images collected by the Robotti robot from AgroIntelli (AgroIntelli A/S, Aarhus, Denmark), we have developed methods to generate distinct... R.N. Jørgensen, S. Skovsen, O. Green, C.G. Sørensen |
13. Long-range Bluetooth Smart Stakes and High-gain Receivers for High-density Sensing in Precision AgricultureTo achieve the goals of precision agriculture, accurate spatial-temporal soil information is needed, especially because soil properties can change within and between growing seasons. While remote sensing can provide high coverage, some soil properties must be measured in situ. Current existing industry solutions are too expensive per unit to deploy in sufficiently high density for dynamic management zones, creating a need for low-cost sensor networks.... S. Craven, C. Sandholtz, B. Mazzeo |