Proceedings
Authors
| Filter results28 paper(s) found. |
|---|
1. Early Detection of Oil Palm Fungal Disease Infestation Using A Mid-Infrared Spectroscopy TechniqueBasal stem rot (BSR) caused by Ganoderma boninense is known as the most destructive disease of oil palm plantations in Southeast Asia. Ganoderma could potentially reduce the market share of palm oil for Malaysia. Currently Malaysia produces about 50% of the world’s supply of palm oil. Early, accurate, and non-destructive diagnosis of Ganoderma fungal infection is critical for management of this disease. Early disease management of Ganoderma could also prevent great losses in production and... S. Liaghat, S. Mansor, H. Shafri, S. Meon, R. Ehsani, S. Azam, N. Noh |
2. Study on Monitoring System of Wheat SowingIn order to real-time monitoring the sowing status of the multi-channel seeder, a distributed monitoring system is developed. The monitoring module of sowing and the monitoring terminal is designed with ... W. Fu, Z. Meng, G. Wu, J. Dong, H. Mei, C. Zhao |
3. Performance Evaluation of STICS Crop Model to Simulate Corn Growth Attributes in Response to N Rate and Climate VariationsImproving nitrogen use efficiency in crop plants contributes to increase the sustainability of agriculture. Crop models could be used as a tool to test the impact of climatic conditions on crop growth under several N management practices and to refine N application recommendation and strategy. STICS, a crop growth simulator developed by INRA (France), has the capability to assimilate leaf area index (LAI) from remote sensing to re-initialize input parameters, such as seeding date and seeding... E. Pattey, G. Jego, N. Tremblay, C. Drury, B. Ma, J. Sansoulet, N. Beaudoin |
4. The Spatial And Temporal Variability Analysis Of Wheat Yield in suburban of BeijingAbstract: The yield map is the basis of the fertilization maps and plant maps. In order to diagnose the cause of variation accurately, not only the spatial variation of annual yield data, but also the successive annual yield data of temporal variability should be understood.The introduction of yield monitor system, global positioning system (GPS), and geographic information system have provided new methods to obtain wheat yield in precision agriculture.... Z. Meng, Z. Wang, G. Wu, W. Fu, X. An |
5. The Performance Of Mobile Devices' Inertial Measurement Unit For The Detection Of Cattle's Behaviors On PastureOver the past decade, the Precision Livestock Farming (PLF) concept has taken a considerable place in the development of accurate methods for a better management of farm animals. The recent technological improvements allow the raising of numerous motion sensors such as accelerometers and GPS tracking. Several studies have shown the relevancy of these sensors to distinguish the animals’ behavior using various classification techniques such as neuronal networks or multivariate... A. Andriamandroso, B. Dumont, F. Lebeau, J. Bindelle |
6. Exploiting The Variability In Pasture Production On New Zealand Hill Country.New Zealand has about four million hectares in medium to steep hill country pasture to which granular solid fertiliser is applied by airplane. On most New Zealand hill country properties where cultivation is not possible the only means of influencing pasture production yield is through the addition of fertilizers and paddock subdivision to control grazing and pasture growth rates. Pasture response to fertilizer varies in production zones within the farm which can be modelled... M.Q. Grafton, P.J. Mcveagh, R.R. Pullanagari, I.J. Yule |
7. The Device of Air-assisted Side Deep Precision Fertilization for Rice TransplanterRice is the most important crop in China, which has the largest plant area. Fertilization is an important process of rice production, which directly affects the yield of crops, reasonable and effective use of chemical fertilizer can improve the yield of crops. At present, the mechanization level of rice fertilization is very low in China, and the artificial fertilization requires a large amount of fertilizer which caused the uneven distribution. The rice side deep fertilizing is an ideal way of... C. Zhao, G. Wu, Z. Meng, W. Fu, L. Li, X. Wei |
8. Development of Land Leveling Equipment Based on GNSSAn attitude adjustable land leveling equipment was designed. The reference elevation of the land to be leveled was generated based on the topographic data which was acquired by the RTK-GNSS technology. The blade lifting mechanism was controlled by comparing the reference elevation and the real-time blade’s elevation and attitude data which was obtained by the dual antenna GNSS receiver and as a result the land leveling operation was implemented. A new algorithm using the electro-hydraulic... W. Fu, G. Wu, H. Bao, X. Wei, Z. Meng |
9. Processing Yield Data from Two or More CombinesErroneous data affect the quality of yield map. Data from combines working close to each other may differ widely if one of the monitors is not properly calibrated and this difference has to be adjusted before generating the map. The objective of this work was to develop a method to correct the yield data when running two or more combines in which at least one has the monitor not properly calibrated. The passes of each combine were initially identified and three methods to correct yield data were... L. Maldaner, J.P. Molin, T.F. Canata |
10. Static and Kinematic Tests for Determining Spreaders Effective WidthSpinner box spreaders are intensively used in Brazil for variable rate applications of lime in agriculture. The control of that operation is a challenging issue because of the complexity involved on the interactions between product and machine. Quantification of transverse distribution of solids thrown from the spinner box spreaders involves dynamic conditions tests where the material deposited on trays is evaluated along the pass of the machinery. There is a need of alternative testing methods... L. Maldaner, T. Canata, J. Molin, B. Passalaqua, J.J. Quirós |
11. Integrated Approach to Site-specific Soil Fertility ManagementIn precision agriculture the lack of affordable methods for mapping relevant soil attributes is a fundamental problem. It restricts the development and application of advanced models and algorithms for decision making. The project “I4S - Integrated System for Site-Specific Soil Fertility Management” combines new sensing technologies with dynamic soil-crop models and decision support systems. Using sensors with different measurement principles improves the estimation of soil fertility... R. Gebbers, V. Dworak, B. Mahns, C. Weltzien, D. Büchele, I. Gornushkin, M. Mailwald, M. Ostermann, M. Rühlmann, T. Schmid, M. Maiwald, B. Sumpf, J. Rühlmann, M. Bourouah, H. Scheithauer, K. Heil, T. Heggemann, M. Leenen, S. Pätzold, G. Welp, T. Chudy, A. Mizgirev, P. Wagner, T. Beitz, M. Kumke, D. Riebe, C. Kersebaum, E. Wallor |
12. In-field Variability of Terrain and Soils in Southeast Kansas: Challenges for Effective ConservationA particular challenge for crop production in southeast Kansas is the shallow topsoil, underlain with a dense, unproductive clay layer. Concerns for topsoil loss have shifted production systems to reduced tillage or conservation management practices. However, historical erosion events and continued nutrient and sediment loss still limit the productive capacity of fields. To improve crop production and further adoption of conservation practices, identification of vulnerable areas of fields was... G.F. Sassenrath, T. Mueller, V.J. Alarcon, S.E. Kulesza, D. Shoup |
13. AGOC: Agriculture Operations CenterAfter another long day, the farmer sits down in front of a computer (wishing this time was instead spent on the front porch catching a last glimpse of the sunset), and reflects once again ... What if ... I actually knew the health of 100% of my crops rather than what I know today. a mere 20%. What if ... there was an effective, simple way to synchronize crop scouting and crop imagery efforts. What... M. Zamzow, H. Moulton |
14. Principal Component Analysis of Rice Production Environment in the Rice Terrace RegionEnvironmental conditions that affect rice production, such as air temper- ature, relative humidity, solar radiation, effective cation exchangeable capacity (ECEC) of the soil, and total nitrogen in irrigation water, were assessed for 4 paddy fields in Hoshino village, Fukuoka prefecture in Japan. Also, environ- mental factors that affected rice quality (physicochemical properties of rice grains and cooked rice) were identified using data during the beginning of a ripening period (20 days after... Y. Hirai, Y. Beppu, Y. Mori, K. Tomita, K. Hamagami, K. Mori, S. Uchida, S. Inaba |
15. Soil Spatial Variability Assessment and Precision Nutrient Management in Maize (Zea Mays L.)Investigations on soil spatial variability and precision nutrient management based targeted yield approach in maize was carried out at Agricultural research station (ARS), Mudhol (Karnataka), India under irrigated condition during 2013-14, 2014-15 and 2015-16. ARS, Mudhol is located in northern dry zone of Karnataka at 160 20! N latitude, 750 15! E longitude and at an altitude of 577.6 meter above mean sea level. To assess the spatial variability, the study area was divided into 20 x20 m size... M.P. Potdar, G.B. Balol, S.A. Satyareddi, B.T. Nadagouda , C.P. Chandrashekar |
16. Identifying and Filtering Out Outliers in Spatial DatasetsOutliers present in the dataset is harmful to the information quality contained in the map and may lead to wrong interpretations, even if the number of outliers to the total data collected is small. Thus, before any analysis, it is extremely important to remove these errors. This work proposes a sequential process model capable of identifying outlier data when compared their neighbors using statistical parameters. First, limits are determined based on the median range of the values of all the... L. Maldaner, J. Molin, T. Tavares, L. Mendez, L. Corrêdo, C. Duarte |
17. An Automatic Control Method Research for 9YG-1.2 Large Round BalerWhen manual or semi-automatic round baler working, the tractor driver have to frequently manual the machine according to the bale process at the same time of driving. The driver easily feel fatigue in this operating mode for a long time, so the consistency of the bale’s density can not be guaranteed. And there may be wrong operation. In this article, we use the model 9YG-1.2 large round baler as a research prototype. We study the information collection and processing of the baler’s... J. Dong, Z. Meng, Y. Cong, A. Zhang, W. Fu, R. Pan, Q. Yang, Y. Shang |
18. Development of Farmland-Terrain Simulation System for Consistency of Seeding DepthA farmland-terrain simulation system suitable for rugged topography was designed to study the irregularities of farmland surface morphology led by both topographic fluctuation and terrain tilt. The system consists of terrain simulation mechanism, hydraulic system, control system, etc. The terrain simulation mechanism is connected to the rack through hydraulic cylinder to simulate farmland surface fluctuation. The hydraulic system controls the hydraulic cylinder to drive the terrain simulation... W. Fu, J. Dong, Y. Cong, N. Gao, Y. Li, Z. Meng |
19. Salinity Stress Assessment on Vegetation Cover in Arid Regions Using Visible Range Indices of True Color Aerial UAV/Drone ImagesDate palm (Phoenix dactylifera L.) is one of the most important plant growing in arid and semi-arid regions, where it has a social, cultural, economic and nutritious importance. Although date palm can be ranked as the highest salt tolerance plant among fruit crop, extreme salinity can negatively affect its growth, yield and fruit quality. Inadequate annual rainfall of arid regions has stressed and rapidly decreased date palm plantation due to salinity and drought. In this study unmanned aerial... Y.A. Al-mulla, S. Al-rahbi |
20. Optimizing Nitrogen Application to Maximize Yield and Reduce Environmental Impact in Winter Wheat ProductionField-specific fertilizer rate optimization is known to be beneficial for improving farming profit, and profits can be further improved by dividing the field into smaller plots and applying site-specific rates across the field. Finding optimal rates for these plots is often based on data gathered from said plots, which is used to determine a yield response curve, telling us how much fertilizer needs to be applied to maximize yield. In related work, we use a Convolutional Neural Network, known... A. Peerlinck, J. Sheppard, G.L. Morales luna, P. Hegedus, B. Maxwell |
21. A Framework for Imputation of Missing Parts in UAV Orthomosaics Using Planetscope and Sentinel-2 DataIn recent years, the emergence of Unmanned Aerial Vehicles (UAV), also known as drones, with high spatial resolution, has broadened the application of remote sensing in agriculture. However, UAV images commonly have specific problems with missing areas due to drone flight restrictions. Data mining techniques for imputing missing data is an activity often demanded in several fields of science. In this context, this research used the same approach to predict missing parts on orthomosaics obtained... F.R. Pereira, A.A. Dos reis, R.G. Freitas, S.R. Oliveira, L.R. Amaral, G.K. Figueiredo, J.F. Antunes, R.A. Lamparelli, E. Moro, N.D. Pereira, P.S. Magalhães |
22. Comparative Analysis of Light-weight Deep Learning Architectures for Soybean Yield Estimation Based on Pod Count from Proximal Sensing Data for Mobile and Embedded Vision ApplicationsCrop yield prediction is an important aspect of farming and food-production. Therefore, estimating yield is important for crop breeders, seed-companies, and farmers to make informed real-time financial decisions. In-field soybean (Glycine max L.(Merr.)) yield estimation can be of great value to plant breeders as they screen thousands of plots to identify better yielding genotypes that ultimately will strengthen national food security. Existing soybean yield estimation tools,... J.J. Mathew, P.J. Flores, J. Stenger, C. Miranda, Z. Zhang, A.K. Das |
23. Report on Research and Extension of Precision Agriculture in JapanThe objective of this report is to present the current status of precision agriculture and smart agriculture in Japan. As of 2023, there are approximately 150 precision agriculture-related venture companies in Japan, and the number is increasing every year. Research related to precision agriculture is mainly conducted by the IT and Mechatronics Subcommittee of the Japanese Society for Agricultural and Biological Engineering, which consists of about 1,000... E. Morimoto |
24. Creating a Comprehensive Software Framework for Sensor-driven Precision AgricultureRobots and GPS-guided tractors are the backbone of smart farming and precision agriculture. Many companies and vendors contribute to the market, each offering their own customized solutions for common tasks. These developments are often based on vendor-specific, proprietary components, protocols and software. Many small companies that produce sensors, actuators or software for niche applications could contribute their expertise to the global efforts of creating smart farming solutions, if their... O. Scholz, F. Uhrmann, M. Weule, T. Meyer, A. Gilson, J. Makarov, J. Hansen, T. Henties |
25. Use of Radar SAR Images to Assess Soil Moisture in Cane Crops: Practical Implications in Agricultural OperationSugar cane cultivation in the geographical region of the Cauca River Valley is a key industry for the local economy. However, this crop faces constant challenges related to the management of agricultural machinery for soil cultivation in conditions of high soil moisture. In this context, the synthetic aperture radar (SAR Radar) of the Sentinel 1 satellite emerges as a promising technology. The purpose of this work is to explore the use of the Sentinel 1 satellite SAR radar sensor in sugarcane... O.J. Munar-vivas, S. Anderson guerrero, D.F. Angrino chiran, J.F. Mateus-rodriguez |
26. Using Remote Sensing to Quantify Biomass in AlfalfaSatellite images are a useful decision support tool to optimize management practices at on-farm scale. Based on this, the development of predictive tools to estimate pasture biomass can be a promising framework to determine the best cutting time, maximizing biomass without compromising yield parameters. Therefore, the main objective of this study was to develop a regression model that allows estimating a value of biomass to give as a recommendation to farmers. To collaborate in their decision... M.F. Lucero, A. Zajdband, C. Hernandez, I. Ciampitti, A. Carcedo |
27. Design of an Autonomous Ag Platform Capable of Field Scale Data Collection in Support of Artificial IntelligenceThe Pivot+ Array is intended to serve as an innovative, multi-user research platform dedicated to the autonomous monitoring, analysis, and manipulation of crops and inputs at the plant scale, covering extensive areas. It will effectively address many constraints that have historically limited large-scale agricultural sensor and robotic research. This achievement will be made possible by augmenting the well-established center pivot technology, known for its autonomy, with robust power infrastructure,... S. Jha, J. Krogmeier, D. Buckmaster, D.J. Love, R.H. Grant, M. Crawford, C. Brinton, C. Wang, D. Cappelleri, A. Balmos |
28. 3D Computer Vision with a Spatial-temporal Neural Network for Lameness Detection of SowsThe lameness of sows is one of the biggest concerns for swine producers, which can lead to considerable economic losses due to reduced productivity and welfare. There is a real need for early detection of lameness in sows to enable timely intervention and minimize loss. Currently, lame detection relies on visual observation and locomotion scoring of sows, which is subjective, labor-intensive, and difficult to conduct for large groups of animals within a short time. This study presents 3D computer... Y. Wang, Y. Lu, D. Morris, M. Benjamin, M. Lavagnino, J. Mcintyre |