Proceedings
Authors
| Filter results28 paper(s) found. |
|---|
1. Spatial-temporal Management Zones For Biomass MoistureBiomass handling operations (harvesting, raking, collection, and transportation) are critical operations within the agricultural production system since they constitute the first link in the biomass supply chain, a fact of substantial importance considering the increasingly involvement of biomass in bio-refinery and bio-energy procedures. Nevertheless, the inherent uncertainty, imposed by the interaction between environmental, biological, and machinery factors, makes the available scheduling... S. Fountas, D. Bochtis, C. Sorensen, O. Green, R. J, T. Bartzanas |
2. Implementation of ECU For Agricultural Machines Based On IsoAgLib Open SourceIn this paper work, we consider implementation of electronic control unit (ECU) for agricultural machineries. Software implementation is based on IsoAgLib library developed by OSB&IT Engineering Company. We modify IsoAgLib and upgrade it for our target system. The IsoAgLib is an object oriented C++ library that has the communication services and management systems according to the ISO 11783 standard. This library allows building ISOBUS compatible equipment without the protocols implementation... E. Tumenjargal, L. Badarch, W. Ham, H. Kwon |
3. Design and Implementation of Virtual Terminal Based On ISO11783 Standard for Agricultural TractorsThe modern agricultural machinery most common use of the embedded electronic and remote sensing technology demands adoption of the Precision Agriculture (PA). One of the common devices is the Virtual Terminal (VT) for tractor. The VT’s functions and terminology are described in the ISO11783 standard. This work presents the control system design and implementation of the VT and some Electronic Control Units (ECU) for agricultural vehicles based on the ISO 11783 standard. The VT development... E. Tumenjargal, L. Badarch, W. Ham, H. Kwon |
4. Economic Evaluation of a Variable Lime Application Strategy Based on Soil pH Maps Derived from On-The-Go pH-Measurements under German Conditions... A. Borchert, G. Recke, D. Dabbelt, D. Trautz, H. Olfs |
5. Evaluation of Photovoltaic Modules at Different Installation Angles and Times of the DaySeveral electricity-consuming components for cooling and heating, illumination, ventilation, and irrigation are used to maintain proper environments of protected crop cultivation facilities. Photovoltaic system is considered as one of the most promising alternative power source for protected cultivation. Effects of environment,... S. Chung, J. Kong, Y. Huh, K. Bae, S. Hur, D. Lee, Y. Chae |
6. Relationship of Soil Properties to Apparent Ground Conductivity in Wild Blueberry FieldsOne of the fundamental deficiencies in high value crops is the lack of detailed, up-to-date and pertinent geo-referenced soil information for site-specific crop management to improve productivity. This experiment was designed to estimate and map soil properties rapidly and reliably using an electromagnetic induction (EMI) method. Two wild blueberry... F.S. Khan, Q.U. Zaman, A.W. Schumann, A. Madani, D.C. Percival, A.A. Farooque, S.R. Saleem, F.S. Khan |
7. Detection Of Drainage Failure In Reconstructed Cranberry Soils Using Time Series AnalysisA cranberry farm is often a semi-closed water system, where water is applied by means of irrigation and drained using an artificial drainage system. Cranberry bogs must be drained to the water level inside the surrounding ditches in order to maintain an optimal pore pressure within the root zone, which is important for a number of reasons. First of all, Phytophthara causing root rot are commonly associated with irrigation with contaminated surface water (Oudemans, 1999)... S.J. Gumiere, Y. Périard, J. Caron, D.W. Hallema, J.A. Lafond |
8. Automatic Detection And Mapping Of Irrigation System Failures Using Remotely Sensed Canopy Temperature And Image ProcessingToday there is no systematic way to identify and locate failures of irrigation systems mainly because of the labor costs associated with locating the failures. The general aim of this study was to develop an airborne thermal imaging system for semi - automatic monitoring and mapping of irrigation system failures, specifically, of leaks and clogs. Initially, leaks and clogs were simulated by setting controlled trials in table grapes vineyards and olive groves. Airborne thermal... V. Alchanatis, Y. Cohen, M. Sprinstin, A. Cohen, I. Zipori, A. Dag, A. Naor |
9. Mapping Spatial Production Stability in Integrated Crop and Pasture Systems: Towards Zonal Management That Accounts for Both Yield and Livestock-landscape Interactions.Precision farming technologies are now widely applied within Australian cropping systems. However, the use of spatial monitoring technologies to investigate livestock and pasture interactions in mixed farming systems remains largely unexplored. Spatio-temporal patterns of grain yield and pasture biomass production were monitored over a four-year period on two Australian mixed farms, one in the south-west of Western Australia and the other in south-east Australia. A production stability index was... P. Mcentee, S. Bennett, M. Trotter, R. Belford, J. Harper |
10. On-Farm Evaluation of an Active Optical Sensor Performance for Variable Nitrogen Application in Winter WheatWinter wheat (Triticum aestivum L.) represents almost 50% of total cereal production in the European Union, accounting for approximately 25% of total mineral nitrogen (N) fertilizer applied to all crops. Currently, several active optical sensor (AOS) based systems for optimizing variable N fertilization are commercially available for a variety of crops, including wheat. To ensure successful adoption of these systems, definitive measurable benefits must be demonstrated. Nitrogen management strategies... O.S. Walsh, S.M. Samborski, D. Gozdowski, M. Stępień, E. Leszczyńska |
11. Adjustment of Corn Population and Nitrogen Fertilization Based on Management ZonesThe main objective of this study was to adjust the corn population and nitrogen fertilization according to management zones, based on past grain yield maps (seven of soybean and three of corn) and soil electrical conductivity. The study was carried out in Não-Me-Toque, Rio Grande do Sul, Brazil, and it was conducted in a factorial strip blocks with 3 repetitions in each management zone, being the treatments: corn populations (56000, 64000, 72000, 80000 and 88000 plants ha-1),... R. Schwalbert, T.J. Carneiro amado, T. Horbe, G.M. Corassa, F.H. Gebert |
12. Precision Agriculture Techniques for Crop Management in Trinidad and Tobago: Methodology & Field LayoutAgriculture in Trinidad and Tobago has not advanced at the same rate at which new agricultural technology has been released. This has led to large-scale abandonment of crop lands as challenges posed by labor availability and their agronomic capability could not meet the technological demands for agricultural production, competitiveness and sustainability. There is an urgent need to develop technology-based agriculture models to meet the demands of a modern agricultural sector and to maintain its... G. Seepersad, T. Sampson, S. Seepersad, D. Goorahoo |
13. Design and Analysis of ISO 11783 Task Controller's Functionality in Server - Client ECU for Agricultural VehiclesA modern agricultural vehicle's electronic control units (ECU) communicated based on the ISO 11783 standards. The connection of different machines, implements, different manufacturers into a single bus for the exchange of control commands and sensor data are a challenge for the precision agriculture. One of main functionality is the Task controller in the intelligent monitoring system. The task controller is to log data and assign set-point values for automated work (task) sequences... E. Tumenjargal, E. Batbayar, S. Munkhbayar, S. Tsogt-ochir, M. Oyumaa, K. Chung, W. Ham |
14. Influence of Planter Downforce Setting and Ground Speed on Seeding Depth and Plant Spacing Uniformity of CornUniform seed placement improves seed-to-soil contact and requires proper selection of downforce control across varying field conditions. At faster ground speeds, downforce changes and it becomes critical to select the level of planter downforce settings to achieve the desired consistency of seed placement during planting. The objective of this study was to assess the effect of ground speed and downforce setting on seeding depth and plant spacing and to evaluate the relationship of ground speed... A. Sharda, S. Badua, I. Ciampitti, R. Strasser, T.W. Griffin |
15. Optical High-Resolution Camera System with Computer Vision Software for Recognizing Insects, Fruit on Trees, Growth of CropsWith the inspiration of helping the farmer to grow his crop in the optimal way, Pessl Instruments GmbH, from Weiz, Austria, developed optical high-resolution camera system, together with a computer vision software which is able to recognize insects, fruits on trees and growth of crop. Pessl Instruments develops decision support system which is consisting from remote monitoring of insect traps and remote monitoring of fields and crops. Optical high-resolution camera system can be installed on the... J. Potrpin, G. Pessl, D. Najvirt, C. Pilz |
16. Comparison and Validation of Different Soil Survey Techniques to Support a Precision Agricultural SystemThe data need of precision agriculture has resulted in an intensive increase in the number of modern soil survey equipment and methods available for farmers and consultants. In many cases these survey methods cannot provide accurate information under the used environmental conditions. On a 36 hectare experimental field, several methods have been compared to identify the ones which can support the PA system the best. The methods included contact and non contact soil scanning, yield mapping, high... V. Lang, G. Tóth, S. Csenki, D. Dafnaki |
17. Multispectral Assessment of Chickpea in the Northern Great PlainsChickpea is an increasingly important crop in the Montana agricultural system. From 2017 to 2021 the U.S. has planted an average of about 492,000 acres per year with Montana chickpea production accounting for around 44% of the U.S. total (USDA/NASS QuickStats accessed on 2/11/2021). This has led to an increase in breeding efforts for elite varieties adapted to the unique conditions in the Northern Great Plains. Breeding of chickpea often relies on traditional phenotyping techniques that are laborious,... J.M. Vetch |
18. Assessing the Potential of Sentinel-1 in Retrieving Mango Phenology and Investigating Its Relation to Weather in Southern GhanaThe rise in global production of horticultural tree crops over the past few decades is driving technology-based innovation and research to promote productivity and efficiency. Although mango production is on the rise, application of the remote sensing technology is generally limited and the available study on retrieving mango phenology stages specifically, was focused on the application of optical data. We therefore sought to answer the questions; (1) can key phenology stages of mango be retrieved... B.A. Torgbor, M.M. Rahman, A. Robson, J. Brinkhoff |
19. Automated In-field Ornamental Nursery Plant Counting and Quality Assessment with End-to-end Deep Learning for Inventory ManagementEfficient inventory management and rigorous quality evaluation play crucial roles for monitoring sales, yield, space utilization, production schedules, and quality enhancements in the ornamental nursery sector. The current method for conducting inventory and quality assessments is through manual plant counting, even when dealing with thousands of plants. The prevailing approach is inefficient, time consuming, labor intensive, potential inaccuracies, and high expenses. Given the continuous decrease... H.H. Syed, T. Rehman |
20. Yield Analysis in Sugarcane Harvesters Using Design of Experiments (DoE) MethodologyThe sugarcane crop is highlighted in national agribusiness, Brazil is the world’s largest producer of the plant, and the prospection of specialists is of strong growth for the next years. However, in order to increase productivity, technological interventions through of precision agriculture must be implemented. Among them, the management of inputs guided by yield spatial variability for otmizing production and income. This project approaches the implementation of the methodology of analysis... M.L. Da silva, J. . Alves de lima, A. Balbinot, J.P. Molin |
21. A Digital Twin for Arable Crops and for GrassThere is an opportunity to use process-based cropping systems models (CSMs) to support tactical farm management decisions, by monitoring the status of the farm, by predicting what will happen in the next few weeks, and by exploring scenarios. In practice, the responses of a CSM will deviate more and more from reality as time progresses because the model is an abstraction of the real system and only approximates the responses of the real system. This limitation may be overcome by using the CSM... F. Van evert, P. Van oort, B. Maestrini, A. Pronk, S. Boersma, M. Kopanja, G. Mimić |
22. Bio-Effectors As a Promising Tool for Precision Agriculture and Integrated Plant NutritionBio-effectors, such as microorganisms and active natural compounds, are of increasing interest as promising alternatives or substitutes to precarious agrochemicals. European and global markets (valued at 14.6 billion US$ in 2023) for agricultural biologicals (bio-pesticides, bio-fertilizers, and bio-stimulants) are predicted to grow at rates of more than 13.5 % per year. Improved availability and use efficiency of mineral nutrients, tolerance to abiotic stresses, yield and quality traits, as well... M. Weinmann, M. Nkebiwe, N. Weber, K. Bradacova, N. Morad-talab, U. Ludewig, T. Müller, G. Neumann, M. Raupp, K. Bradacova |
23. A High-throughput Phenotyping System Evaluating Salt Stress Tolerance in Kale Plants Cultivated in Aquaponics EnvironmentsMonitoring plant growth in a controlled environment is crucial to make informed decisions for various management practices such as fertilization, weed control, and harvesting. Agronomic, physiological, and architectural traits in kale plants (Brassica oleracea) are important to producers, breeders, and researchers for assessing the performance of the plants under biotic and abiotic stresses. Traditionally, architectural, and morphological traits have been used to monitor plant growth. However,... T. Rehman, M. Rahman, E. Ayipio, D. Lukwesa, J. Zheng, D. Wells, H.H. Syed |
24. Optimizing Experimental Design for Determining Economic Nitrogen Levels: Insights on the Use of Monte Carlo SimulationsThe determination of economic nitrogen levels is a pivotal element in the quest for sustainable agricultural practices. Designing experiments to accurately identify these levels, especially in contexts constrained by limited plot availability, poses a significant challenge. In response to these challenges, this study endeavors to demonstrate an approach to optimize the experimental design for identifying economic nitrogen levels, even under such constraints. We employed statistical... C. Matavel, A. Meyer-aurich, H. Piepho |
25. Data-driven Agriculture and Sustainable Farming: Friends or Foes?Sustainability in our food and fiber agriculture systems is inherently knowledge intensive. It is more likely to be achieved by using all the knowledge, technology, and resources available, including data-driven agricultural technology and precision agriculture methods, than by relying entirely on human powers of observation, analysis, and memory following practical experience. Data collected by sensors and digested by artificial intelligence (AI) can help farmers learn about synergies... O. Rozenstein, Y. Cohen, V. Alchanatis , K. Behrendt, D.J. Bonfil, G. Eshel, A. Harari, W.E. Harris, I. Klapp, Y. Laor, R. Linker, T. Paz-kagan, S. Peets, M.S. Rutter, Y. Salzer, J. Lowenberg-deboer |
26. Comparison of NDVI Values at Different Phenological Stages of Winter Wheat (Triticum Aestivum L.)The main objective of this study is to monitor, detect and quantify the presence of live green vegetation with the MicaSense RedEdge-MX Dual Camera System (MS) mounted on a DJI Matrice 210 V2 and GreenSeeker HCS 250 (GS) in winter wheat (Triticum aestivum L.) by using Normalized Difference Vegetation Index (NDVI). Surveys were conducted in the North-Western part of Hungary, in Mosonmagyaróvár on six different dates. A small-scale field trial in winter wheat was constructed as a randomized... S. Zsebő, G. Kukorelli, V. Vona, L. Bede, D. Stencinger, A. Kovacs, G. Milics, I.M. Kulmany, B. Horváth, G. Hegedűs, J.A. Abdinoor |
27. Combining Remote Sensing and Machine Learning to Estimate Peanut Photosynthetic ParametersThe environmental conditions in which plants are situated lead to changes in their photosynthetic rate. This alteration can be visualized by pigments (Chlorophyll and Carotenoids), causing changes in plant reflectance. The goal of this study was to evaluate the performance of different Machine Learning (ML) algorithms in estimating fluorescence and foliar pigments in irrigated and rainfed peanut production fields. The experiment was conducted in the southeast of Georgia in the United States in... C. Rossi, S.L. Almeida, M.N. Sysskind, L.A. Moreno, A. Felipe dos santos, L. Lacerda, G. Vellidis, C. Pilcon, T. Orlando costa barboza |
28. Cherry Yield Forecast: Harvest Prediction for Individual Sweet Cherry TreesDigitalization continues to transform the agricultural sector as a whole and also affects specific niches like horticulture. Particularly in fruit and wine production, the focus is on the application of sensor systems and data analysis aiming at automated detection of drought stress or pests in vineyards or orchards. As part of the “For5G” project, we are developing an end-to-end methodology for the creation of digital twins of fruit trees, with a strong focus... A. Gilson, L. Meyer, A. Killer, F. Keil, O. Scholz, D. Kittemann, P. Noack, P. Pietrzyk, C. Paglia |