Proceedings
Authors
| Filter results10 paper(s) found. |
|---|
1. Computer Aided Engineering Analysis and Design Optimization for Precision Manufacturing of Tillage Tool: Sweep CultivatorThe process optimization in advance tillage tool system conceptually designed and fabricated by computer aided engineering analysis techniques. The Software testing a field performance is taken in the soil bed preparation as well as in the various crop patterns. It was found most use full in obtaining high weed removal efficiency. The precision geometry, optimum energy utilization, multi-operational design, easy transport and flexible attachments are some of the features which results in achieving... G.U. Shinde, D.M. Salokhe, P.D. Badgujar, D.B. Sharma |
2. Estimation of Rice Yield from MODIS Data in West Java, IndonesiaChiharu Hongo1*, Takaaki Furukawa1, Gunardi Sigit2, Masayasu Maki3, Koki Honma3,... C. Hongo, T. Furukawa, G. Sigit, M. Maki, K. Honma, K. Yoshida, K. Oki, H. Shirakawa |
3. Climatological Diagnostic Analysis: A Case Study for Parbhani District in Marathwada Region of India... S.N. Pawar, A.K. Gore, G.U. Shinde, M.S. Pendke |
4. Modifying the University of Missouri Corn Canopy Sensor Algorithm Using Soil and Weather InformationCorn production across the U.S. Corn belt can be often limited by the loss of nitrogen (N) due to leaching, volatilization and denitrification. The use of canopy sensors for making in-season N fertilizer applications has been proven effective in matching plant N requirements with periods of rapid N uptake (V7-V11), reducing the amount of N lost to these processes. However, N recommendation algorithms used in conjunction with canopy sensor measurements have not proven accurate in making N recommendations... G. Bean, N.R. Kitchen, D.W. Franzen, R.J. Miles, C. Ransom, P. Scharf, J. Camberato, P. Carter, R.B. Ferguson, F. Fernandez, C. Laboski, E. Nafziger, J. Sawyer, J. Shanahan |
5. Sensor-based Variable-rate N on Corn Reduced Nitrous Oxide EmissionsMore nitrogen fertilizer is applied to corn than to all other U.S. crops combined, contributing to atmospheric heat trapping when nitrous oxide is produced. Higher nitrogen rate is well known to increase nitrous oxide emissions, and earlier N application time may increase the window during which nitrous oxide can form. An experiment was initiated in 2012 comparing nitrogen management and drainage effects on corn yield and nitrous oxide emissions. Two nitrogen treatments... P. Scharf |
6. Aerial Photographs to Predict Yield Loss Due to N Deficiency in CornNitrogen fertilizer is a crucial input for corn production, and in the U.S. more nitrogen is applied to corn than to all other crops combined. In wet weather, nitrogen can be lost from soil by leaching and by denitrification. Which process predominates depends largely on soil drainage. Nitrogen deficiency in nearly any plant is expressed by a lighter green color of leaves than in nitrogen-sufficient plants. Nitrogen deficiency in corn can be easily seen from the air. ... P. Scharf |
7. Sensor-based Nitrogen Applications Out-performed Producer-chosen Rates for Corn in On-farm DemonstrationsOptimal nitrogen fertilizer rate for corn can vary substantially within and among fields. Current N management practices do not address this variability. Crop reflectance sensors offer the potential to diagnose crop N need and control N application rates at a fine spatial scale. Our objective was to evaluate the performance of sensor-based variable-rate N applications to corn, relative to constant N rates chosen by the producer. Fifty-five replicated on-farm demonstrations... P. Scharf, K. Shannon, K. Sudduth, N. Kitchen |
8. Development of a Graphical User Interface for Spinner-Disc Spreader Calibration and Spread Uniformity AssessmentBroadcast fertilizer distribution through spinner-disc spreaders remain the most cost-effective, and least time consuming process to apply the needed soil amendments for the next crop. Spreaders currently available to producers enable them to apply a variety of granular products at varying rates, blends, and swath widths. In order to uniformly apply granular fertilizer or lime, the spreader should be calibrated by standard pan testing with any change in spreader settings, application rate, or... R. Colley iii, Y. Lin, J. Fulton, S. Shearer |
9. eFields – An On-Farm Research Network to Inform Farm RecommendationsOn-farm research has been traditionally used to provide local, field-scale information about agronomic practices. Farmers tend to have more confidence in on-farm research results because they are perceived to be more relevant to their farm operations compared to small plot research results. In recent years, more farmers have been conducting on-farm studies to help evaluate practices and input decisions. Recent advances in precision agriculture technologies have stream-lined the on-farm... J.P. Fulton, E. Hawkins, R. Colley iii, K. Port, S. Shearer, A. Klopfenstein |
10. Nitrogen Placement Considerations for Maize Production in the Eastern US CornbeltProper fertilizer placement is essential to optimize crop performance and amount of applied nitrogen (N) along with crop yield potential. There exists several practices currently used in both research within farming operations on how and when to apply N to maize (Zea mays L). Split applications of N in Ohio is popular with farmers and provides an economic benefit but more recently some farmers have been using mid- and late-season N fertilizer applications for their maize production. ... J.P. Fulton, E. Hawkins, S. Shearer, A. Klopfenstein, J. Hartschuh, S. Custer |