Proceedings
Authors
| Filter results5 paper(s) found. |
|---|
1. Development of a PWM Precision Spraying System for Unmanned HelicopterApplication of protection materials is a crucial component in the high productivity of agriculture. Motivated by the needs of aerial precision application, in this paper we present a pulse width modulation (PWM) based precision spraying system for unmanned helicopter. The system is composed of the tank, pipelines, pump, nozzles and the automatic control unit. The system can spray with a constant rate automatically when the speed of the UAV fluctuates between 1 m/s to 8 m/s. The application rate... R. Zhang, L. Chen, T. Yi, Y. Guo, H. Zhang |
2. Evaluation of a Sensor and Control Interface Module for Monitoring of Greenhouse EnvironmentProtected horticulture in greenhouses and plant factories has been increased in many countries due to the advantages of year-round production in controlled environment for improved productivity and quality. For protected horticulture, environmental conditions are monitored and controlled through wired and wireless devices. Various devices are used for monitoring and control of spatial and temporal variability in crop growth environmental conditions. Recently, various sensors and control devices,... N. Sung, S. Chung, Y. Kim, K. Han, J. Choi, J. Kim, Y. Cho, S. Jang |
3. Airspeed and Pressure Affect Spray Droplet Spectrum from an Aerial Nozzle for Fixed-wing ApplicationsThe atomization of the droplets generated by a flat fan nozzle has been studied in the IEA-I high speed wind tunnel at NERCIEA with Marvern Spraytec Laser Diffraction system. The measurement point is set at 0.15m, 0.25m and 0.35m away from the orifice of the nozzle. The wind speed range is from 150km/h to 305km/h, and the tube pressure is set about 0.3MPa, 0.4MPa and 0.5MPa. The measuring distance from the orifice of the nozzle is found important to the diameter and relative span of the droplets.... Q. Tang, L. Chen, R. Zhang, M. Xu, G. Xu, T. Yi |
4. Prediction of Nitrogen Needs with Nitrogen-rich Strips and Ramped Nitrogen StripsBoth nitrogen rich strips and ramped nitrogen strips have been used to estimate topdress nitrogen needs for winter wheat based on in-season optical reflectance data. The ramped strip system places a series of small plots in each field with increasing levels of nitrogen to determine the application rate at which predicted yield response to nitrogen reaches a plateau. The nitrogen-rich strip system uses a nitrogen fertilizer optimization algorithm based on optical reflectance measures from the nitrogen-rich... D.C. Roberts, B.W. Brorsen, W.R. Raun, J.B. Solie |
5. Controller Performance Criteria for Sensor Based Variable Rate ApplicationSensor based variable rate application of crop inputs provides unique challenges for traditional rate controllers when compared to map based applications. The controller set point is typically changing every second whereas with a map based systems the set point changes much less frequently. As applied data files for a sensor based variable rate nitrogen applicator were obtained from a wheat field in north central Oklahoma. These data were analyzed to determine the magnitude and frequency of rate... R.K. Taylor, P. Bennur, J.B. Solie, N. Wang, P. Weckler, W.R. Raun |