Proceedings
Authors
| Filter results3 paper(s) found. |
|---|
1. Optimization of Forage Harvesting By Automatic Speed Control and Additive ApplicationEfficient use of machines is especially important in forage harvesting due to the short harvesting period and expensive machinery. To achieve the best efficiency, a harvesting machine, such as a loader wagon, should be used with optimal loading. Whereas overloading the machine can cause blockages in the cut-and-feed unit, underloading consumes more time and reduces the quality of the resulting silage. In addition, the quality can be improved by optimizing the dosage of the additive. Since the... A. Suokannas, J. Backman, A. Visala, A. Kunnas |
2. Path Generation Method with Steering Rate ConstraintThe practical way to generate a reference path in path tracking is to follow an adjacent swath. However, if the adjacent swath contains sharp turnings, the reference path will eventually contain sharper turn than the tractor is able to follow. This occurs especially in the corner of a field plot when the field is driven around. In the headland, the objective is to minimize the time to reach the next swath. The commonly known method to generate the shortest path between two arbitrary... J. Backman, T. Oksanen, A. Visala |
3. Studies on Soil Spatial Variability and Its Impact on Cane Yield Under Precision Nutrient Management SystemIn present investigation an attempt was made to quantify the soil variability of 30 grids of 10 m x 10 m dimension at research farm of Nandi Sahakari Sakkare Karkhane (NSSK), Krishna Nagar, District. Bijapur. Each grid (10 m x 10 m) showed variation with available nitrogen as low as 140 kg ha-1 to as high as 245 kg/ha with a range of 105 kg/ha, phosphorus as low as 53 kg P2O5 ha-1 and as high as 89.3 kg P2O5 ha-1 with... M. Kumar r, M. Kumar r, D. Nadagouda |