Proceedings
Authors
| Filter results27 paper(s) found. |
|---|
1. Remote Control System for Greenhouse Environment Using Mobile DevicesProtected crop production facilities such as greenhouse and plant factory have drawn interest and the area is increasing in Korea as well as in other countries in the world. Remote... S. Chung, K. Kim, H. Kim, J. Choi, Y. Zhang, S. Kang, K. han, S. Hur |
2. Determination of Sensor Locations for Monitoring of Soil Water Content in GreenhouseMonitoring and control of environmental condition is highly important for optimum control of the conditions, especially in greenhouse and plant factor, and the condition... S. Chung, Y. Huh, J. Choi, D. Ryu, K. Kim, H. Kim, H. Kim |
3. Evaluation of Photovoltaic Modules at Different Installation Angles and Times of the DaySeveral electricity-consuming components for cooling and heating, illumination, ventilation, and irrigation are used to maintain proper environments of protected crop cultivation facilities. Photovoltaic system is considered as one of the most promising alternative power source for protected cultivation. Effects of environment,... S. Chung, J. Kong, Y. Huh, K. Bae, S. Hur, D. Lee, Y. Chae |
4. Determination of Sensor Locations for Monitoring of Greenhouse Ambient EnvironmentIn protected crop production facilities such as greenhouse and plant factory, f... S. Chung, K. Kim, Y. Huh, S. Hur, S. Ha, M. Ryu, H. kim, K. han |
5. Variability in Soil Water Content and Sensor-Based Irrigation Scheduling for Protected Ginseng ProductionGinseng is one of important medicinal plants, especially in Asian countries including Korea. Korean ginseng is mostly grown in sun-block facility on ridges, and irrigation would be critical for better production. Conventionally no irrigation or timer-controlled irrigation based on experience was practiced, and variability of... J. Cho, B. Cho, S. Chung |
6. Vision Of Farm Of Tomorrow... K. Charvat, P. Gnip |
7. Adoption Of N-application Rates In Different Broccoli Cultivars By Reflectance MeasurementsTo date many sensors have been solely developed and tested for arable crops. This project aims to develop the means to rapidly map N-demand in broccoli plants on a site-specific, plant-by-plant basis using reflectance measurements. The aim of this specific study was to monitor nitrogen status in six different broccoli cultivars using reflectance measurements and to derive suitable N-fertilization strategies based on the sensor measurements.A... S. Graeff, J. Pfenning, W. Claupein |
8. New Geospatial Technologies For Precision Farming... K. Charvat, J. Cepicky, P. Gnip |
9. Vlite Node – New Sensor Technology For Precision Farming... K. Charvat, J. Jezek, M. Musil, Z. Krivanek, P. Gnip |
10. Cognitive Radio In Precision AgricultureThis is an attempt to design a precision agriculture (PA) model, to control the required parameters in greenhouse with wireless sensor network (WSN). This proto type model of wireless sensor and actuators network is designed as per required parameters of available crops in a greenhouse. The design of the sensor node consists of sensors, a micro-controller and a low-powered radio module. Real-time data, enable the operators to characterise the operating parameters of the greenhouse and also... S.P. Nayse, D.D. Choudhari, V.M. Wadhai |
11. Pa Adoption By A Korean Rice Farming Group: Case Study Of Pyeongtaek CityResearch on precision agriculture (PA) has been conducted in Korea for about 10 years since 1999. Most of the research was focused on rice paddy fields that were flooded, flat, and small sized (e.g., 30 m x 100 m). Accomplishment during the period includes investigation on spatial variability in soil, crop growth, and yield properties, application of imported sensors and variable rate applicators, and development of Korean version of these sensors... S. Chung, H. Yoo, S. Hong |
12. Performance Evaluation Of Single And Multi-GNSS Receivers In Agricultural Field ConditionsSelection of appropriate receivers and utilization methods of positioning systems are important for better positioning in different applications of precision agriculture. Objective of this research was to evaluate the performance of single and multi-GNSS receivers at stationary and moving conditions in typical Korean agricultural sites such as open field, orchard area, and mountainous area A single-GNSS receiver (Model: R100; Hemisphere GNSS, Scottsdale, AZ, USA) and a multi-GNSS... Y. Kim, M. Song, S. Chung , M.S. Kabir, Y. Huh |
13. Design And Construction Of An Ultrasonic Cutting Width Sensor For Full-Feed Type Mid-Sized Multi-Purpose CombinesPrecision agriculture analyzes the spatial variability according to the characteristics of an optimum setting of agricultural materials. To raise the profitability of agriculture and to reduce the environmental impact, technological research and development of precision agriculture has been conducted. In Asian countries such as Japan... Y. Huh, S. Chung, Y. Chae, J. Lee, S. Kim, M. Choi, K. Jung |
14. Basic Tests Of pH And EC Probes For Automatic Real Time Nutrient Control In Protected Crop ProductionResearch on greenhouse and plant factory has been actively conducting to provide a stable growth environment. In plant factory, EC concentration (EC) and acidity (pH) of nutrient have a significant impact on physiological and morphological of plant. Therefore, EC and pH are important element for automatic control of nutrient solution. In this study, performance pH and EC sensors was evaluated for the responsiveness, accuracy and displacement. This study includes development of environmental... Y. Choo, S. Chung, Y. Huh, Y. Kim, S. Jang, K. Jung |
15. Field Tests and Improvement of Sensor and Control Interface Modules with Improved Compatibility for GreenhousesNumber of greenhouses has been increased in many countries to control the cultivation conditions and improve crop yield and quality. Recently, various sensors and control devices, and also wireless communication tools have been adopted for efficient monitoring and control of the greenhouse environments. However, there have been farmers’ demands for improved compatibility among the sensors and control devices. In the study, sensor and control interface modules with improved compatibility... K. Han, S. Chung |
16. Measuring Height of Sugarcane Plants Through LiDAR TechnologySugarcane (Saccharum spp.) has an important economic role in Brazilian agriculture, especially in São Paulo State. Variation in the volume of plants can be an indicative of biomass which, for sugarcane, strongly relates to the yield. Laser sensors, like LiDAR (Light Detection and Ranging), has been employed to estimate yield for corn, wheat and monitoring forests. The main advantage of using this type of sensor is the capability of real-time data acquisition in a non-destructive way, previously... T.F. Canata, J.P. Molin, A.F. Colaço, R.G. Trevisan, P.R. Fiorio, M. Martello |
17. FOODIE Data Model for Precision AgricultureThe agriculture sector is a unique sector due to its strategic importance for both citizens (consumers) and economy (regional and global), which ideally should make the whole sector a network of interacting organizations. The FOODIE project aims at building an open and interoperable agricultural specialized platform hub on the cloud for the management of spatial and non-spatial data relevant for farming production. The FOODIE service platform deals with including their thematic, spatial, and temporal... K. Charvat, T. Reznik, K. Charvat jr., V. Lukas, S. Horakova, M. Kepka |
18. Quo Vadis Precision FarmingThe agriculture sector is a unique sector due to its strategic importance for both citizens and economy which, ideally, should make the whole sector a network of interacting organizations. There is an increasing tension, the like of which is not experienced in any other sector, between the requirements to assure full safety and keep costs under control, but also assure the long-term strategic interests of Europe and worldwide. In that sense, agricultural production influences, and is influenced... K. Charvat, T. Reznik, V. Lukas, K. Charvat jr., S. Horakova, M. Splichal, M. Kepka |
19. Spatial Variability of Canopy Volume in a Commercial Citrus GroveLiDAR (light detection and ranging) sensors have shown good potential to estimate canopy volume and guide variable rate applications in different fruit crops. Oranges are a major crop in Brazil; however the spatial variability of geometrical parameters remains still unknown in large commercial groves, as well as the potential benefit of sensor guided variable rate applications. Thus, the objective of this work was to characterize the spatial variability of the canopy volume in a commercial orange... A.F. Colaço, J.P. Molin, R.G. Trevisan, J.R. Rosell-polo, A. Escolà |
20. Post Processing Software for Grain Yield Monitoring System Suitable to Korean Full-feed CombinesPrecision agriculture (PA) has been adopted in many countries and crop and country specific technologies have been implemented for different crops and agricultural practices. Although PA technologies have been developed mainly in countries such as USA, Europe, Australia, where field sizes are large, need of PA technologies has been also drawn in countries such as Japan and Korea, where field sizes are relatively small (about 1 ha). Although principles are similar, design concept and practical... K. Lee, S. Chung, J. Lee, S. Kim, Y. Kim, M. Choi |
21. Agronomic Characteristics of Green Corn and Correlations with Productivity for the Establishment of Management Zones in Vale Do Ribeira, SP, BrazilIn Brazil, the progressive development in the cultivation of the corn for consumption in the green stadium stands by the relevant socio-economic role that this related to multiple applications, the attractive market price and continuous demand for the product in nature. Therefore, this study was to analyze the correlations and spatial variability of the productivity of the culture of the green corn in winter, in alluvial soil of the type Cambisols eutrophic in the amount areas and Hydromorphic... W.J. Souza, V.S. Akune, S.H. Benez, L.C. Citon, P.H. Nakazawa, A.J. Santana neto |
22. Spatial Variability and Correlations Between Soil Attributes and Productivity of Green Corn CropIn Brazil, the progressive development in the cultivation of the corn for consumption in the green stadium stands by the relevant socio-economic role that this related to multiple applications, the attractive market price and continuous demand for the product in nature. Therefore, this study was to analyze the correlations and spatial variability of the productivity of the culture of the green corn in winter, in alluvial soil of the type Cambisols eutrophic in the amount areas and Hydromorphic... W.J. Souza, S.H. Benez, P.H. Nakazawa, A.J. Santana neto, L.C. Citon, V.S. Akune |
23. Evaluation of a Sensor and Control Interface Module for Monitoring of Greenhouse EnvironmentProtected horticulture in greenhouses and plant factories has been increased in many countries due to the advantages of year-round production in controlled environment for improved productivity and quality. For protected horticulture, environmental conditions are monitored and controlled through wired and wireless devices. Various devices are used for monitoring and control of spatial and temporal variability in crop growth environmental conditions. Recently, various sensors and control devices,... N. Sung, S. Chung, Y. Kim, K. Han, J. Choi, J. Kim, Y. Cho, S. Jang |
24. Sensor Comparison for Yield Monitoring Systems of Small-Sized Potato HarvestersYield monitoring of potato in real time during harvesting would be useful for farmers, providing instant yield and income information. In the study, potentials of candidate sensors were evaluated with different yield measurement techniques for yield monitoring system of small-sized potato harvesters. Mass-based (i.e., load cell) and volume-based (i.e., CCD camera) sensors were selected and tested under laboratory conditions. For mass-based sensing, an impact plate instrumented with load cells... K.M. Swe, Y. Kim, D. Jeong, S. Lee, S. Chung, M.S. Kabir |
25. Variability Analysis of Temperature and Humidity for Control Optimization of a Hybrid Dehumidifier with a Heating Module for GreenhousesProtected horticulture using greenhouses and also recently plant factories is becoming more popular, especially for high-value crops such as paprika, tomato, strawberry, due to year-round production of high yield and better quality crops under controlled environment. Temperature and humidity are most important ambient environmental factors for not only optimum crop growth but also disease control. This study was conducted to analyze vertical and spatial variability of temperature and humidity... Y. Seo, W. Lee, Y. Kim, S. Chung, S. Jang, I. Bae |
26. Map Whiteboard As Collaboration Tool for Smart Farming Advisory ServicesPrecision agriculture, a branch of smart farming, holds great promise for modernization of European agriculture both in terms of environmental sustainability and economic outlook. The vast data archives made available through Copernicus and related infrastructures, combined with a low entry threshold into the domain of AI-technologies has made it possible, if not outright easy, to make meaningful predictions that divides individual agricultural fields into zones where variable rates... K. Charvat, R. Berzins, R. Bergheim, F. Zadrazil, J. Macura, D. Langovskis, H. Snevajs, H. Kubickova, S. Horakova, K. Charvat jr. |
27. SmartAgriHubs FIE20 - Groundwater and Meteo Sensors and Earth Observation for Precision AgricultureThe solution developed under the SmartAgriHubs project in the scope of the Flagship Innovation Experiment FIE20 Groundwater and meteo sensors is an expert system to support farmers in decision-making process and planning process of field interventions. This FIE20 solution integrates various data sources and different analytical processes in a complete system and provides users an easy-to-use web map application as a common user interface. The FIE20 system integrates components developed during... K. Charvat, M. Kepka, R. Berzins, F. Zadrazil, D. Langovskis, M. Musil |