Proceedings
Authors
| Filter results11 paper(s) found. |
|---|
1. Path Tracking Control of Tractors and Steerable Towed Implements Based On Kinematic and Dynamic Modelingrecise path tracking control of tractors became the enabling technology for automation of field work in recent years. More and more sophisticated control systems for tractors however revealed that exact positioning of the actual implement is equally or even more important. Especially sloped and curved terrain, strip till fields, buried drip irrigation tapes and high-value crop... G. Kormann, S. Mueller, R. Werner |
2. A Non-Destructive Method of Estimating Red Tip Disease in PineappleRed Tip disease typically reduces pineapple yields by up to 50%. At present, the causal agent of Red Tip disease is still unconfirmed. B... F. Abu kassim, G. Vadamalai, A. Mohd hanif, S.K. Balasundram |
3. Land Information System Of Precision Farming In Mongolia Using Remote Sensing And Geographical Information SystemRemote sensing (RS) and geographic information system (GIS) technologies have been of great use to planners in planning for efficient use of natural resources at national, sub region and rural levels. RS can be used for precision farming in a number of ways for providing input supplies and variability management through decision support system. GIS is the principal technology used to integrate spatial data... B. Erdenee, B. Batbayar, R. Tateishi |
4. Performance Evaluation Of Single And Multi-GNSS Receivers In Agricultural Field ConditionsSelection of appropriate receivers and utilization methods of positioning systems are important for better positioning in different applications of precision agriculture. Objective of this research was to evaluate the performance of single and multi-GNSS receivers at stationary and moving conditions in typical Korean agricultural sites such as open field, orchard area, and mountainous area A single-GNSS receiver (Model: R100; Hemisphere GNSS, Scottsdale, AZ, USA) and a multi-GNSS... Y. Kim, M. Song, S. Chung , M.S. Kabir, Y. Huh |
5. Basic Tests Of pH And EC Probes For Automatic Real Time Nutrient Control In Protected Crop ProductionResearch on greenhouse and plant factory has been actively conducting to provide a stable growth environment. In plant factory, EC concentration (EC) and acidity (pH) of nutrient have a significant impact on physiological and morphological of plant. Therefore, EC and pH are important element for automatic control of nutrient solution. In this study, performance pH and EC sensors was evaluated for the responsiveness, accuracy and displacement. This study includes development of environmental... Y. Choo, S. Chung, Y. Huh, Y. Kim, S. Jang, K. Jung |
6. Post Processing Software for Grain Yield Monitoring System Suitable to Korean Full-feed CombinesPrecision agriculture (PA) has been adopted in many countries and crop and country specific technologies have been implemented for different crops and agricultural practices. Although PA technologies have been developed mainly in countries such as USA, Europe, Australia, where field sizes are large, need of PA technologies has been also drawn in countries such as Japan and Korea, where field sizes are relatively small (about 1 ha). Although principles are similar, design concept and practical... K. Lee, S. Chung, J. Lee, S. Kim, Y. Kim, M. Choi |
7. Claypan Depth Effect on Soil Phosphorus and Potassium DynamicsUnderstanding the effects of fertilizer addition and crop removal on long-term change in spatially-variable soil test P (STP) and soil test K (STK) is crucial for maximizing the use of grower inputs on claypan soils. Using apparent electrical conductivity (ECa) to estimate topsoil depth (or depth to claypan, DTC) within fields could help capture the variability and guide site-specific applications of P and K. The objective of this study was to determine if DTC derived from ECa... L. Conway, M. Yost, N. Kitchen, K. Sudduth, B. Myers |
8. Field-scale Nitrogen Recommendation Tools for Improving a Canopy Reflectance Sensor AlgorithmNitrogen (N) rate recommendation tools are utilized to help producers maximize grain yield production. Many of these tools provide recommendations at field scales but often fail when corn N requirements are variable across the field. This may result in excess N being lost to the environment or producers receiving decreased economic returns on yield. Canopy reflectance sensors are capable of capturing within-field variability, although the sensor algorithm recommendations may not always be as accurate... C.J. Ransom, M. Bean, N. Kitchen, J. Camberato, P. Carter, R. Ferguson, F. Fernandez, D. Franzen, C. Laboski, E. Nafziger, J. Sawyer, J. Shanahan |
9. Evaluation of a Sensor and Control Interface Module for Monitoring of Greenhouse EnvironmentProtected horticulture in greenhouses and plant factories has been increased in many countries due to the advantages of year-round production in controlled environment for improved productivity and quality. For protected horticulture, environmental conditions are monitored and controlled through wired and wireless devices. Various devices are used for monitoring and control of spatial and temporal variability in crop growth environmental conditions. Recently, various sensors and control devices,... N. Sung, S. Chung, Y. Kim, K. Han, J. Choi, J. Kim, Y. Cho, S. Jang |
10. Sensor Comparison for Yield Monitoring Systems of Small-Sized Potato HarvestersYield monitoring of potato in real time during harvesting would be useful for farmers, providing instant yield and income information. In the study, potentials of candidate sensors were evaluated with different yield measurement techniques for yield monitoring system of small-sized potato harvesters. Mass-based (i.e., load cell) and volume-based (i.e., CCD camera) sensors were selected and tested under laboratory conditions. For mass-based sensing, an impact plate instrumented with load cells... K.M. Swe, Y. Kim, D. Jeong, S. Lee, S. Chung, M.S. Kabir |
11. Variability Analysis of Temperature and Humidity for Control Optimization of a Hybrid Dehumidifier with a Heating Module for GreenhousesProtected horticulture using greenhouses and also recently plant factories is becoming more popular, especially for high-value crops such as paprika, tomato, strawberry, due to year-round production of high yield and better quality crops under controlled environment. Temperature and humidity are most important ambient environmental factors for not only optimum crop growth but also disease control. This study was conducted to analyze vertical and spatial variability of temperature and humidity... Y. Seo, W. Lee, Y. Kim, S. Chung, S. Jang, I. Bae |