Proceedings
Authors
| Filter results17 paper(s) found. |
|---|
1. Early Detection of Oil Palm Fungal Disease Infestation Using A Mid-Infrared Spectroscopy TechniqueBasal stem rot (BSR) caused by Ganoderma boninense is known as the most destructive disease of oil palm plantations in Southeast Asia. Ganoderma could potentially reduce the market share of palm oil for Malaysia. Currently Malaysia produces about 50% of the world’s supply of palm oil. Early, accurate, and non-destructive diagnosis of Ganoderma fungal infection is critical for management of this disease. Early disease management of Ganoderma could also prevent great losses in production and... S. Liaghat, S. Mansor, H. Shafri, S. Meon, R. Ehsani, S. Azam, N. Noh |
2. Impact of Variable Rate Fertilization on Nutrients Losses in Surface Runoff for Wild Blueberry FieldsWild blueberry producers apply agrochemicals uniformly without considering substantial variation in soil properties, topographic features that may affect fruit yield within field. A wild blueberry field was selected to evaluate the impact of variable rate (VR) fertilization on nutrient losses in surface runoff from steep slope to low lying areas to improve crop... S. Slaeem, Q.U. Zaman, A. Madani, A. Schumann, D. Percival, H.N. Ahmad, A.A. Farooque, F. Khan |
3. Estimating Spatial Variation In Annual Pasture YieldYield mapping is an essential tool for precision management of arable crops. Crop yields can be measured once, at harvest, automatically by the harvesting machinery, and be used to inform a wide range of activities. However yield mapping has had minimal adoption by pastoral farmers. Yield mapping is also a potentially valuable tool for precision management of pastures. However it is difficult to practically map yields on pastures, as they... S.J. Dennis, W. Clarke-hill, A. Taylor, R. Dynes, K. O'neill, T. Jowett |
4. X-Ray Computed Tomography For State Of The Art Plant And Root AnalysisDuring the last years, the formerly in medical applications established technique of X-ray computed tomography (CT) is used for non-destructive material analysis as well. Adapting this technique for the visualization and analysis of growth processes of plants above and underneath the soil enables new possibilities in the so called smart agriculture. Using State-of-the-art CT systems the computed 3D volume datasets allows the visualization and virtual analysis of hidden structures like roots... S. Reisinger, N. Uhlmann, R. Hanke, S. Gerth |
5. Spatial Variability Of Soil Compaction In Annual Cycle Of Different Culture Of Cane Sugar Land Clay SandyThe assessment of soil compaction levels and choosing the best management system are very important in modern agriculture, aiming to prevent or at least restore their physical conditions to a satisfactory level. The renewal of sugar cane plantation happens on average every 5 or 6 years. The current way repeats a sequence compaction and decompaction events during successive cycles of sugarcane, which promotes breakdown of soil structure. During the harvesting and transportation, the... F.C. Masiero, B.B. Fernandes, S.P. Guerra, K.P. Lanças, I. Marasca |
6. Early Detection of Nitrogen Deficiency in Corn Using High Resolution Remote Sensing and Computer VisionThe continuously growing need for increasing the production of food and reducing the degradation of water supplies, has led to the development of several precision agriculture systems over the past decade so as to meet the needs of modern societies. The present study describes a methodology for the detection and characterization of Nitrogen (N) deficiencies in corn fields. Current methods of field surveillance are either completed manually or with the assistance of satellite imaging, which offer... D. Mulla, D. Zermas, D. Kaiser, M. Bazakos, N. Papanikolopoulos, P. Stanitsas, V. Morellas |
7. Using Unmanned Aerial Vehicle and Active-Optical Sensor to Monitor Growth Indices and Nitrogen Nutrition of Winter WheatUsing unmanned aerial vehicle (UAV) remote sensing monitoring system can rapidly and cost-effectively provide crop canopy information for growth diagnosis and precision fertilizer regulation. RapidScan CS-45 (Holland, Lincoln, NE, USA) is a portable active-optical sensor designed for timely, non-destructive obtaining plant canopy information without being affected by weather condition. UAV equipped with RapidScan, is of great significant for rapidly monitoring crop growth and nitrogen (N) status.... X. Liu, Q. Cao, Y. Tian, Y. Zhu, Z. Zhang, W. Cao |
8. AgDataBox: Web Platform of Data Integration, Software, and Methodologies for Digital AgricultureAgriculture is challenging to produce more profitably, with the world population expected to reach some 10 billion people by 2050. Such a challenge can be achieved by adopting precision agriculture and digital agriculture (Agriculture 4.0). Digital agriculture has become a reality with the availability of cheaper and more powerful sensors, actuators and microprocessors, high-bandwidth cellular communication, cloud communication, and Big Data. Digital agriculture enables the flow of information... E.G. Souza, C. Bazzi, A. Hachisuca, R. Sobjak, A. Gavioli, N. Betzek, K. Schenatto, E. Mercante, M. Rodrigues, W. Moreira |
9. Web Application for Automatic Creation of Thematic Maps and Management Zones - AgDataBox-Fast TrackAgriculture is challenging to produce more profitably, with the world population expected to reach some 10 billion people by 2050. Such a challenge can be achieved by adopting precision agriculture and digital agriculture (Agriculture 4.0). Digital agriculture (DA) has become a reality with the availability of cheaper and more powerful sensors, actuators and microprocessors, high-bandwidth cellular communication, cloud communication, and Big Data. DA enables information to flow from used agricultural... J. Aikes Junior, E.G. Souza, C. Bazzi, R. Sobjak, A. Hachisuca, A. Gavioli, N. Betzek, K. Schenatto, W. Moreira, E. Mercante, M. Rodrigues |
10. Survey Shows Specialty and Commodity Crop Retailers Use Precision Agriculture DifferentlyThe 2021 CropLife-Purdue Survey of precision agricultural practices by US agricultural input dealers serving the American grain and oilseed sector shows that most of them use GPS guidance and related technologies like sprayer boom control, most provide variable rate fertilizer services, and the majority say that fertilizer decisions are influenced by grower data. In contrast, dealers serving horticultural and specialty crop farms indicate comparatively modest adoption of many precision agriculture... B.J. Erickson, J. Lowenberg-deboer |
11. AgDataBox-IoT Application Development for Agrometeorogical Stations in Smart FarmCurrently, Brazil is one of the world’s largest grain producers and exporters. Brazil produced 125 million tons of soybean in the 2019/2020 growing season, becoming the world’s largest soybean producer in 2020. Brazil’s economic dependence on agribusiness makes investments and research necessary to increase yield and profitability. Agriculture has already entered its 4.0 version, also known as digital agriculture, when the industry has entered the 4.0 era. This new paradigm uses... A. Hachisuca, E.G. Souza, E. Mercante, R. Sobjak, D. Ganascini, M. Abdala, I. Mendes, C. Bazzi, M. Rodrigues |
12. The ISO Strategic Advisory Group for Smart Farming: a Multi-pronged Opportunity for Greater Global InteroperabilityAgriculture is becoming increasingly complex and producers must secure their profitability, sustainability, and freedom to operate under a progressively more challenging set of constraints such as climate change, regulatory pressure, changes in consumer preferences, increasing cost of inputs, and commodity price volatility. We have not, however, yet reached the level of data interoperability required for a truly "smart" farming that can tackle the aforementioned problems... R. Ferreyra, J. Lehmann |
13. Profitability of Regenerative Cropping with Autonomous Machines: an Ex-ante Assessment of a British Crop-livestock FarmFarmers, agroecological innovators and research have suggested mixed cropping as a way to promote soil health. Mixing areas of different crops in the same field is another form of precision agriculture's spatial and temporal management. The simplest form of mixed cropping is strip cropping. In conventional mechanized farming use of mixed cropping practices (i.e., strip cropping, pixel cropping) is limited by labour availability, rising wage rates, and management complexity. Regenerative agriculture... A. Al Amin, J. Lowenberg-deboer, K.F. Franklin, E. Dickin, J. Monaghan, K. Behrendt |
14. Global Adoption of Precision Agriculture: an Update on Trends and Emerging TechnologiesThe adoption of precision agriculture (PA) has been mixed. Some technologies (e.g., Global Navigation Satellite System (GNSS) guidance) have been adopted rapidly worldwide wherever there is mechanized agriculture. Adoption of some of the original PA technologies introduced in the 1990s has been modest almost everywhere (e.g., variable rate fertilizer). New and more advanced technologies based on robotics, uncrewed aerial vehicles (UAVs), machine vision, co-robotic automation, and artificial intelligence... J. Mcfadden, B. Erickson, J. Lowenberg-deboer, G. Milics |
15. A Multi-objective Optimisation Analysis of Virtual Fencing in Precision GrazingVirtual fencing is a precision livestock farming tool consisting of invisible boundaries created via Global Navigation Satellite Systems (GNSS) and managed remotely and in real time by app-based technology. Grazing livestock are equipped with battery-powered collars capable of delivering audio or vibration cues and possibly electric shocks when approaching or crossing an invisible boundary. Virtual fencing makes precision grazing possible without the need for physical fences. This technology originated... E. Maritan, K. Behrendt, J. Lowenberg-deboer, S. Morgan, M.S. Rutter |
16. Data-driven Agriculture and Sustainable Farming: Friends or Foes?Sustainability in our food and fiber agriculture systems is inherently knowledge intensive. It is more likely to be achieved by using all the knowledge, technology, and resources available, including data-driven agricultural technology and precision agriculture methods, than by relying entirely on human powers of observation, analysis, and memory following practical experience. Data collected by sensors and digested by artificial intelligence (AI) can help farmers learn about synergies... O. Rozenstein, Y. Cohen, V. Alchanatis , K. Behrendt, D.J. Bonfil, G. Eshel, A. Harari, W.E. Harris, I. Klapp, Y. Laor, R. Linker, T. Paz-kagan, S. Peets, M.S. Rutter, Y. Salzer, J. Lowenberg-deboer |
17. Worldwide Crop Precision Agriculture Adoption: 2026 UpdateRobotics, machine vision, and drone spraying have attracted much attention in recent years. But the technologies introduced in the 2000s and earlier, such as yield monitors, guidance, variable rate technology (VRT), and digital imagery continue to advance worldwide, more on large mechanized grain and oilseed farms. This update summarizes census estimates and adoption surveys with statistically reliable random sampling from 24 countries. Within-country and farm size breakdowns are reported when... B. Erickson, J. Mcfadden, E. Morimoto, J. Lowenberg-deboer |