Proceedings
Topics
| Filter results57 paper(s) found. |
|---|
1. Spectral Angle Mapper (SAM) Based Citrus Greening Disease Detection Using Airborne Hyperspectral ImagingOver the past two decades, hyperspectral (HS) imaging has provided remarkable performance in ground objects classification and disease identification, due to its high spectral resolution. In this paper, a novel method named ‘extended spectral angle mapping (ESAM)’ is proposed to detect citrus greening disease (Huanglongbing or HLB), which is a destructive disease of citrus. Firstly, Savitzky-Golay smoothing filter was applied to the raw image to remove spectral noise within the da... W. Lee, K. Wang, H. Li, R. Ehsani, C. Yang |
2. A 3-D Stereovision Simulator for Centrifugal Fertilizer Granule Spreading... J. Vangeyte, F. Cointault, M. Paindavoine, J. Pieters, B. Hijazi |
3. Validation of Modicovi - Monocot and Dicot Coverage Ratio Vision Based Method for Real Time Estimation Canopy Coverage Ratio between Cereal Crops and Dicotyledon Weeds... H.S. Midtiby, R.N. Jørgensen, N. Krüger, M.S. Laursen |
4. Evaluating Spectral Measures Derived From Airborne Multispectral Imagery for Detecting Cotton Root RotCotton root rot, caused by the soilborne fungus Phymatotrichopsis omnivore, is one of the most destructive plant diseases occurri... C. Yang, G.N. Odvody, C.J. Fernandez, J.A. Landivar, R.L. Nichols |
5. A Method for Combining Spatial and Hyperspectral Information for Delineation of Homogenous Management ZonesHyperspectral (HS) remote sensing is a constantly developing field. New remote sensing applications of different fields constantly appear. The possibility of acquisition information about an object without physical contact is spanning new opportunities in many fields and for precision agricultural in particular. These opportunities demand constant improvement and development of new analysis approaches and algorith... Y. Cohen, V. Alchanatis, O. Levi, S. Cohen |
6. Specification Of Data Dimension To Measure The Data Quality On Cotton ProductionThe management of cotton cultivation and agriculture in general, depend on quality data enabling the retrieving of useful information as an aid in decision making related to management techniques and farm management . Part of this task depends intelligible data generated through the processes that make up this segment . Creating means for enabling the classification data is the starting point for making decisions regarding any corrections or adjustments in the mass data . The heterogenei... C. Santos, A. Hirakawa |
7. Detection Of Fruit In Canopy Night-Time Images: Two Case Studies With Apple And MangoReliable estimation of the expected yield remains a major challenge in orchards. In a recent work we reported the development of an algorithm for estimating the number of fruits in images of apple trees acquired in natural daylight conditions. In the present work we tested this approach with night-time images of similar apple trees and further adapted this approach to night-time images of mango trees. Working with the apple images required on... R. Linker, A. Payne, K. Walsh, O. Cohen |
8. NOAA's National Geodetic Survey?s National Spatial Reference System And The National Height ModernizatioThe National Geodetic Survey (NGS) is responsible for the establishment and maintenance of the National Spatial Reference System (NSRS). NGS manages a network of Continuously Operating Reference Stations (CORS) that provides Global Navigation Satellite System (GNSS) data and serves as the backbone of the NSRS. Our goal is to maintain a network of stations to serve as control for any project undertaken by local surveyors. In addition, numerous other applications benefit from a... J.D. Rigney |
9. A Dual Motor Actuator Used To Detach Fruit By Shaking Limbs Of Fruit TreesMechanizing the fruit removal operation during fresh-market apple harvesting will result in considerable cost savings for fruit growers. This study introduces a mechanical fruit removal technique that uses a unique limb shaking mechanism called a Dual Motor Actuator (DMA). The DMA was developed as an infinitely variable end-effector that applies rhythmic motions to a fruiting limb to remove fruit. The novelty of the DMA design is the use of two eccentrics mounted to electric mot... M. De kleine, M. Karkee, Q. Zhang, K. Lewis |
10. Post-Harvest Quality Evaluation System On Conveyor Belt For Mechanically Harvested CitrusRecently, a machine vision technology has shown its popularity for automating visual inspection. Many studies proved that the machine vision system can successfully estimate external qualities of fruit as good as manual inspection. However, introducing mechanical harvesters to citrus industry caused the following year’s yield loss due to the loss of immature young citrus. In this study, a machine vision system on a conveyor belt was developed to inspect mechanica... W. Lee, R. Ehsani, F. Roka, D. Choi, C. Yang |
11. Tomato Development Monitoring In An Open Field, Using A Two-Camera Acquisition SystemIntroduction Optimal harvesting date and predicted yield are valuable information when farming open field tomatoes, making harvest planning and work at the processing plant much easier. Monitoring growth during tomato?s early stages is also interesting to assess plant stress or abnormal development. Yet, it is very challenging due to the colours and the high degree of ... F. Rossant, I. Bloch, J. Orensanz, D. Boisgontier, U. Verma, M. Lagarrigue |
12. Sound Based Detection Of Moths In Open FieldsIntroduction Open field farming of tomatoes suffers from the presence of harmful moths whose larvas are devastating. Detecting automatically the presence of moths allows regulating the use of pesticides, according to the actual population present in the field. Up to now, sex pheromone traps have been used, the number of captured insects giving some indication about the population. However, proper inspection of the traps i... F. Rossant, J. Orensanz, D. Boisgontier, N. Bouhlel, M. Lagarrigue |
13. Automatic Soil Penetrometer Measurements And GIS-Based Documentation With The Autonomous Field Robot Platform BoniRobFor a sustainable agriculture, reliable measurements of soil properties and its interpretation are of highest relevance. Until today most of the measurements are carried out manually or by integrating off-line laboratories. Moreover, the number and density of measurement points is always an important aspect with respect to the statistical significance of the results. In this work a fully automatic measurement system has been developed and applied for the first time with free sel... M. Göttinger, S. Hinck, K. Möller, A. Ruckelshausen, C. Scholz |
14. New Innovation Approaches In Precision Farming – The Example Of The Base Fertilization ProcessNowadays, innovations in Precision Farming are mostly bound to further developments and new solution approaches on the technical level. However, for efficient service provision it is important to work on strategies for application of these technologies. To satisfy customers’ demands for highly specialized methods and detailed results collaboration between various companies in service consortiums is often required. In doing so, every company can provide its proven and evidentially e... J. Friedrich, M. Becker, M.F. Schneider, S. Klingner |
15. Row-Crop Planter Requirements To Support Variable-Rate Seeding Of MaizeCurrent planting technology possesses the ability to increase crop productivity and improve field efficiency by precisely metering and placing crop seeds. Growing high yielding crops not only requires using the right seed variety and rate but also achieving optimal performance with available planter technology. Planter performance depends on using the correct planter and technology (display and rate controller system) setup which consists of determining optimal settings for different pla... J.P. Fulton, K.S. Balkcom, B.V. Ortiz, T.P. Mcdonald, G.L. Pate, S.S. Virk, A. Poncet |
16. Evaluation Of A Sensor-Based Precision Irrigation System For Efficiency And To Monitor And Control Groundwater Over-Pumping In OmanOman is a country with a total area of 309,500 km2. However, cultivable land in Oman is estimated to be less than 2%, which amounts to about 6100 km2. More than 50 percent of the arable lands located in the northern coastal belt of Al Batinah region. The country with average annual rainfall around 100 mm, has limited natural fresh water resources and has been facing the serious problem of sea water intrusion into the scarce groundwater reserves due to undis... H.P. Jayasuriya, S. Zekri, R. Zaier, H. Al-buasidi, A. Teirab, N. Hamza |
17. Precision Thinning Of Fruit CropsL. Damerow, C. Seehuber and M. Blanke University of Bonn, Germany Correspondence: damerow@uni-bonn.de Abstract for o r a l Thinning is a pre-requisite in the majority of fruit crops worldwide in order to overcome or prevent alternate bearing (change of years with large and low yields) and to provide regular yields of high qu... M.M. Blanke, L. Damerow, C. Seehuber |
18. Effect Of Starch Accumulation In Huanglongbing Symptomatic Leaves On Reflecting Polarized LightHuanglongbing (HLB) or citrus greening disease is an extremely dangerous infection which has severely influenced the citrus industry in Florida. It was also recently found in California and Texas. There is no effective cure for this disease reported yet. The infected trees should be identified and removed immediately to prevent the disease from being spread to other trees. The visual leaf symptoms of this disease are green islands, yellow veins, or vein corking; howeve... W. Lee, A. Pourreza |
19. Fusion Of Multi Exposure Stereo Images And Thermography For Obstacle Detection On Agricultural VehiclesIntroduction Over the years agricultural vehicles become increasingly automated with trajectory row tracking and master-slave vehicle configurations, and autoguided vehicles. Safety is an important aspect. Auto guided vehicles exist in industry, where the surroundings are semistructured and flat. Sopme cars have collision sensors. But in agriculture the ground is not flat. The vehicles are meant to be driven into crops, and there are certain paths... K. Nielsen, M.R. Nielsen |
20. Angular Velocity Meter Application Study In The Agricultural Vehicle Navigation SystemIn the agricultural vehicle navigation system, most frequently used steering feedback sensors are rotary potentiometer and rotary encoder to measure the wheel angle, and linear potentiometer to measure the stretching length of steering cylinder. In practice, these sensors are usually installed a little troublesomely, and often have relatively low reliability because of the more installation fittings. With the progress of MEMS technical, angular velocity meter achieves higher accuracy whi... J. Hu, L. Gao |
21. Development Of An Hydraulic Penetrometer Data Acquisition SoftwareCurrently , in addition to increased production , the costs reduction are focused in order to increase efficiency in production, so the modern agriculture intent to find planting methods which extract the maximum possible data about the used area for making possible to do this preparation in the most appropriate manner, considering the shortcomings of evaluating these data. This method is contained in the concepts of an agricultural practice that has been steadily growing, ... I. Marasca, D.P. Casiero, S.P. Guerra, K.P. Lanças, E.R. Spadim |
22. Design, Error Characterization And Testing Of A System To Measure Locations Of Fruits In Tree CanopiesMapping the variability of fruit size and quality within tree canopies in commercial orchards is an important tool for implementing precision horticulture. To do so at a reasonably fast rate requires localization technologies that offer sufficient speed and accuracy, at a range long enough to cover entire trees – or several trees at a time. Existing approaches for measuring fruit locations include: manual (centimeter accuracy and measurement time in the order of minutes pe... S.G. Vougioukas, F.J. Jimenez, F. Khosro anjom, R. Elkins, C. Ingels, R. Arikapudi |
23. Advances In Automating Individual Plant Care Of Vegetable CropsAutomation of individual crop plant care in commercial vegetable crop fields has increased practical feasibility and improved efficiency and economic benefit if a systems approach is taken in the engineering design to mechanization that incorporates precision planting techniques. In addition to the optimization in the biological productivity of crop plants when the spatial distribution of crop plants allows their uniform access to nutrients, water and light in an optimum u... M. Pérez ruiz, D.C. Slaughter |
24. Agribot: Development Of A Mobile Robotic Platform To Support Agricultural Data CollectionPrecision Agriculture and agricultural practices that take into account environment protection, leads to several research challenges. Sampling scale and the precision required by these new agricultural practices are often greater than those required by traditional agriculture, raising the costs of production. This whole process requests an expressive number of researches in developing automation instruments. Amongst them, the use of remote sensing techniques based on On-the-Go s... R. Tabile, A. Porto, R. Inamasu, R. Sousa |
25. CANopen Implementation To Wireless Sensor NetworkField buses are widely applied in the control of mobile machines. They enable us to build embedded control systems, where the sensors and actuators are connected to each other by the bus. The most commonly used bus standard for Control Area Network (CAN) between tractors and implements in agriculture and forestry is ISOBUS. Once the number of sensors and actuators increases in the implement side, a combination of ISOBUS and CANopen can be applied. CANopen is a communication prot... R. Virrankoski, M. Madetoja |
26. GNSS Positioning Techniques For AgricultureBroadacre, row crop and high value crops each have different positioning needs. Within these agricultural groups, individual practices such as mapping, guidance and machine control for tillage, application and harvest each have their own Global Navigation Satellite Systems (GNSS) needs for an optimal price/performance and value equation. New research and algorithm development by NovAtel has resulted in a significant simplification of positioning methodology with incr... P.M. Casiano, T.G. Morley, Z. Sadeque |
27. Performance Evaluation Of Single And Multi-GNSS Receivers In Agricultural Field ConditionsSelection of appropriate receivers and utilization methods of positioning systems are important for better positioning in different applications of precision agriculture. Objective of this research was to evaluate the performance of single and multi-GNSS receivers at stationary and moving conditions in typical Korean agricultural sites such as open field, orchard area, and mountainous area A single-GNSS receiver (Model: R100; Hemisphere GNSS, Scottsdale, AZ, USA) and a multi-GNS... Y. Kim, M. Song, S. Chung , M.S. Kabir, Y. Huh |
28. Instrumented Blades With Automated Control Used In Chisel Plough Acting In Variable DepthsSoil compaction is a problem that affects most of the tilled areas of Brazil, being caused by several factors, such as overloading and intense machine traffic, use of unsuitable tires for applied load and inflation pressures outside the recommendation, machines in the field with the water content of the soil not recommended and several other problems. There are available several models and systems of measuring soil compaction in Brazil; however, the sensors of t... K.P. Lanças, J. Testa, B.B. Fernandes, T.M. Machado |
29. Control System Applied To No-Till Seeding For High-Quality OperationA high quality crop seeding operation should enable a rapid and uniform establishment of a desired plant population. Therefore, a no-till seeder must provide a seeding environment that allows the absorption of water by seeds and appropriate temperature and aeration conditions for germination and emergence processes. To stimulate these processes, the seed needs full contact with soil in order to accelerate the absorption of water and oxygen. Covering the furrow with straw is another impor... A.G. Araujo, A.D. Toledo, A.R. Hirakawa, A.L. Johann |
30. Rapid Data Acquisition For In-Field Plant PhenomicsHigh throughput sensing is necessary for the rapid acquisition of plant canopy physical and physiological parameters on field scales. Simultaneous measures of these descriptive parameters will provide a clearer picture of plant response to biotic and abiotic stressors. Information obtained can assist in early identification of desired genetic traits and the degree to which they are expressed. Identifying these traits and their expression can provide higher efficiency in genetic selection... M.R. Sclemmer, K.H. Holland |
31. Introducing An Integrated Framework To Optimize Cotton Variable Rate Irrigation In Humid RegionsManagement of supplemental irrigation in humid regions is critical because both over and under estimation of the irrigation water requirement can cause cotton lint yield reduction. Spatial variation of the soil physical characteristics is significant in west Tennessee hence precision irrigation strategies should be applied to achieve the optimum lint yield. Despite the significant enhancement in instrumentation and measurements, there are several challenges that need t... A. Haghverdi, B.G. Leib |
32. Generic ISOBUS Compliant Precision Agriculture Functionality In A Proprietary Terminal ConceptDue to increasing investment costs for agricultural resources crop input management precise application technologies are exceedingly gaining interests for customers. One approach for increasing efficiency is using common GPS-devices for reducing over- and underlaps during application processes, and to adjust application rate based on predefined application maps. Driven by this, implement manufacturers are heading towards machinery, which is able to control application rate and ac... G. Happich |
33. Precision Nitrogen Management Based on Nitrogen Removal in Rainfed WheatGrowers of hard red spring wheat may capture price premiums for maximizing the protein concentration of their grain. Nitrogen (N) nutrition adequacy is crucial to achieving high grain protein concentration. The objective of this study was to determine the usefulness of N removal maps by comparing grain protein, yields, and dollar returns obtained from this precision N management approach with that from conventional uniform N management. Strip plot experiments were designed to compare spatiall... D.J. Bonfil, I. Mufradi, S. Asido, D.S. Long |
34. Using Pricise Gps/gis Based Barley Yield Maps to Predict Site-specific Phosphorus RequirementsThree fundamental stages and technologies as main parts of a precision farming project should be considered precisely. These are access to actual multi- dimensional variability detail or variable description on farms, creating a suitable variable-rate technology, and finally providing a decision support system. Some results of a long term practical research conducted by the author in Upon-Tyne Newcastle University of UK for reliable yield monitoring and mapping were utilised to prepare this p... A. Sanaei |
35. A Low-tech Approach to Manage Within Field Variability – Toward a Territorial Scale ApplicationManaging within field variability is promising to achieve European objectives of sustainability in crop production. Technological development has allowed to precisely characterize fields heterogeneity in space and time. However, learnings from low adoption of yield maps in west-European context have highlighted the importance of reliable methods to support decisions. Blackmore et al. designed a delineation method considering yield as an integrative variable that reflects spatial and ... A. Lenoir, B. Vandoorne, B. Dumont |
36. Spatially Explicit Prediction of Soil Nutrients and Characteristics in Corn Fields Using Soil Electrical Conductivity Data and Terrain AttributesSite specific nutrient management (SSNM) in corn production environments can increase nutrient use efficiency and reduce gaseous and leaching losses. To implement SSNM plans, farmers need methods to monitor and map the spatial and temporal trends of soil nutrients. High resolution electrical conductivity (EC) mapping is becoming more available and affordable. The hypothesis for this study is that EC of the soil, in conjunction with detailed terrain attributes, can be used to map soil nutrient... S. Sela, N. Graff, K. Mizuta, Y. Miao |
37. Should We Increase or Decrease the Fertilization in the Zones with the Highest Crop Productivity Potential?Introduction. In traditional farming, fertilizers are applied homogeneously on the agricultural fields taking into account the average crop recommendation. As most fields are not homogeneous, this results in overfertilization of certain zones and underfertilization of other zones. The excess of nitrate leaches to the surface and groundwaters which causes problems with the water quality. Precision fertilizer management has been proposed to reduce these negative e... A. Tsibart, A. Postelmans, J. Dillen, A. Elsen, G. Van de ven, W. Saeys |
38. Predicting Corn Emergence Uniformity with On-the-go Furrow Sensing TechnologyIntegration of proximal soil sensors into commercial row-crop planter components have allowed for a dense quantification of within-field soil spatial variability. These technologies have potential to guide real-time management decisions, such as on-the-go variable seeding rate or depth. However, little is known about the performance of these systems. Therefore, research was conducted in central Missouri, USA to determine the relationship between planter sensor metrics, and corn (Zea mays ... L.S. Conway, C. Vong, N.R. Kitchen, K.A. Sudduth, S.H. Anderson |
39. Soil, Landscape, and Weather Affect Spatial Distributions of Corn Population and YieldAs more planters are equipped with the technology to vary seeding rate, evaluation of the within-field relationships between plant stand density (or population) and yield is needed. One aspect of this evaluation is determining how stand loss and yield are related to soil and landscape factors, and how these relationships vary with different weather conditions. Therefore, this research examined nine site-years of mapped corn yield, harvest population, and soil and landscape data obtained for a... K.A. Sudduth, N.R. Kitchen, L.S. Conway |
40. Management Zone-specific N Mineralization Rate Estimation in Unamended SoilSince nitrogen (N) mineralization from soil organic matter is governed by basic soil properties (soil organic matter content, pH, soil texture, …) that are known to exhibit strong in-field spatial variability, N mineralization is also expected to exhibit significant spatial variability at field scale. An ideal and efficient N recommendation for precision fertilization should therefore account for potential soil mineralizable N considering this spatial variability. Therefore, this study... F.Y. Ruma, M.A. Munnaf, S. De neve, A.M. Mouazen |
41. Effectiveness of Different Precision Soil Sampling Strategies for Site-Specific Nutrient Management in Row-CropsSoil sampling is an important component of site-specific nutrient management in precision agriculture. While precision soil sampling strategies such as grid or zone have been around for a while, the adoption and utilization of these strategies varies considerably among the growers, especially in the southeastern United States. The selection of an appropriate grid size or management zone further differ among the users depending on several factors. In order to better understand how some of the ... M.W. Tucker, S. Virk, G. Harris, J. Lessl, M. Levi |
42. A Multi-objective Optimisation Analysis of Virtual Fencing in Precision GrazingVirtual fencing is a precision livestock farming tool consisting of invisible boundaries created via Global Navigation Satellite Systems (GNSS) and managed remotely and in real time by app-based technology. Grazing livestock are equipped with battery-powered collars capable of delivering audio or vibration cues and possibly electric shocks when approaching or crossing an invisible boundary. Virtual fencing makes precision grazing possible without the need for physical fences. This technology ... E. Maritan, K. Behrendt, J. Lowenberg-deboer, S. Morgan, M.S. Rutter |
43. Design of an Automatic Travelling Electric Fence System for Sustainable Grazing ManagementFences are used in Precision Livestock Farming (PLF) to prevent herbivores from overgrazing and under grazing forages. While effective in controlling animal entry and exit, traditional fences are not flexible enough to meet the needs of both foraging animals and plants in terms of both nutrient availability and physiological demands. An electric fencing system is a form of traditional fencing that employs an electric charge to create a barrier and dissuade animals or people from crossing it. ... M. Alahe, Y. Chang, J.O. Kemeshi, S. Gummi, H. Menendez iii |
44. Detection of Goat Herding Impact on Vegetation Cover Change Using Multi-season, Multi-herd Tracking and Satellite ImageryThe frequency and severity of Mediterranean forest fires are expected to worsen as climate change progresses, heightening the need to evaluate understory fuel management strategies as rigorously as possible. Prescribed small-ruminant foraging is considered a sustainable, cost-effective strategy, but demonstrating a link between animal presence and vegetation change is challenging. This study tested whether the effect of small-ruminant herd presence in Mediterranean woodlands can be detected b... T. Paz kagan, V. Alexandroff, E.D. Ungar |
45. Africa Regional Meeting... K.A. Frimpong |
46. Asia and Oceania Regional Meeting... S.K. Balasundram |
47. Europe Regional Meeting... E. Gil |
48. Latin America and the Caribbean Regional Meeting... R.A. Ortega |
49. North America Regional MeetingAgenda: to discuss PA topics of common interest; to examine potential contributions of country representatives to the ISPA; to formulate suggestions to be examined by the Board for the development of the ISPA. For your information: What do country representatives do? The intent of Country Representatives is to have champions of ISPA spread all over the world. Country Representativ... A. Cambouris, K.A. Sudduth |
50. On-Farm Experimentation Community MeetingMeeting Agenda: Updates for the OFE-C Newsletters Increased membership Conference Global OFE Network (GOFEN) Scientists AND Farmers Global Directory Discussion points OFE-C Outreach Country reps for the OFE-C / Entry point... L. Longchamps |
51. Precision Nitrogen Management Community MeetingAgenda Welcome to the meeting participants by Dr. Brenda Ortiz (Professor at Auburn University) 2022-2024 community leader and incoming leader Dr. Laila Puntel (Syngenta). Brief update of activities and opportunities for the upcoming years (Brenda Ortiz) Strategies to assess precision nutrient management educational needs and networking opportunities among community members and ISPA in general. Discuss possibilities for colla... B.V. Ortiz, L.A. Puntel |
52. Precision Agriculture Economics, Profitability, Adoption, and Risk Community MeetingAgenda Update on Community Activities Update on membership Announcement and introduction of incoming Deputy Leader Discussion points GIATE Symposium session Other activities AOB ... K. Behrendt, M. Michels |
53. African Association for Precision Agriculture Community Meeting... K.A. Frimpong, V. Aduramigba-modupe, N. Fassinou hotegni |
54. Sentinel Fertigation - Sponsor PresentationSentinel’s N-Time software leverages imagery and agronomic data to provide nitrogen application scheduling and rate recommendations to agronomists and farmers. Recommendations from the system have demonstrated profitability improvements of $24/ac and Nitrogen use efficiency (NUE) improvements of 30% in on-farm research studies since 2021. This presentation will discuss the function of N-Time, highlight the advantages of the management system it enables, and briefly discuss on-farm resea... J. Stansell |
55. National Agricultural Producers Data Cooperative - Sponsor Presentation... B.E. Craker |
56. TEG Automation Solutions - Sponsor Presentation... V. Oliveira |
57. Oklahoma State University Department of Plant and Soil Sciences - Sponsor Presentation... R. Sharry |