Proceedings
Authors
| Filter results19 paper(s) found. |
|---|
1. Application Of Precision Agriculture In Carbon Farming Practices Using The Real-time Soil Sensor... Y. Li |
2. Is A Nitrogen-rich Reference Needed For Canopy Sensor-based Corn Nitrogen Applications?The nitrogen (N) supplying capacity of the soil available to support corn (Zea mays L.) production can be highly variable both among and within fields. In recent years, canopy reflectance sensing has been investigated for in-season assessment of crop N health and fertilization. Typically the procedure followed compares the crop in an area known to be non-limiting in N (called a N-rich area) to the crop in areas inadequately fertilized. Measurements from the two areas are used to calculate... N.R. Kitchen, K.S. Suddth, S.T. Drummond |
3. Spatial-temporal Management Zones For Biomass MoistureBiomass handling operations (harvesting, raking, collection, and transportation) are critical operations within the agricultural production system since they constitute the first link in the biomass supply chain, a fact of substantial importance considering the increasingly involvement of biomass in bio-refinery and bio-energy procedures. Nevertheless, the inherent uncertainty, imposed by the interaction between environmental, biological, and machinery factors, makes the available scheduling... S. Fountas, D. Bochtis, C. Sorensen, O. Green, R. J, T. Bartzanas |
4. Comparison Of Three Canopy Reflectance Sensors For Variable-rate Nitrogen Application In CornIn recent years, canopy reflectance sensing has been investigated for in-season assessment of crop nitrogen (N) health and subsequent control of N fertilization. The several sensor systems that are now commercially available have design and operational differences. One difference is the sensed wavelengths, although these typically include wavelengths in both the visible and near-infrared ranges. Another difference is orientation – the sensors most commonly used in the US are designed to... K.A. Sudduth, N.R. Kitchen, S.T. Drummond |
5. Optimizing N, P, K, And S Application Across Landscapes In The Northern Great Plains Using The Plant Root Simulator (PRS™ ) Technology.Early papers on precision farming focused on variable rate fertilization and variable spraying technology (Roberts, 1996). The adoption of this 1st round of precision farming was acknowledged to be a “dead horse” (Mangold, 2000). These authors put forward the notion that farmers needed better tools to decide if the intensive management of fertilizer would result in a significant reduction in input costs, or a significant increase in crop yields. ... K. Greer |
6. Evaluation of PRS(TM) Probe Technology and Model for Variable Rate Fertilizer Application in Hummocky Fields in Saskatchewan... K. Greer, J. Burns, E. Bremer |
7. Applications Of Small UAV Systems For Tree And Nursery Inventory ManagementUnmanned aerial vehicles (UAV) systems could provide low-cost and high spatial resolution aerial images. These features and ease of operation make it a practical tool for applications in precision agriculture and horticulture. This paper highlights the application of UAV systems in tree counting, which is vital for tree inventory management and yield estimation. In this paper, two types of trees were discussed. One type is with non-uniform canopy area (e.g. container plants and citrus... Y. She, R. Ehsani, J. Robbins, J. Owen, J.N. Leiva |
8. Detection Of Fruit In Canopy Night-Time Images: Two Case Studies With Apple And MangoReliable estimation of the expected yield remains a major challenge in orchards. In a recent work we reported the development of an algorithm for estimating the number of fruits in images of apple trees acquired in natural daylight conditions. In the present work we tested this approach with night-time images of similar apple trees and further adapted this approach to night-time images of mango trees. Working with the apple images required only... R. Linker, A. Payne, K. Walsh, O. Cohen |
9. Conditioning Factors For Decision-Making Regarding Precision Agriculture Techniques UsageThe eventual goal of using the techniques of precision agriculture (described as inputs applied at varied rates) is to get one of the following results: (a) lowering cost by reducing inputs, (b) decreasing the pollution of water, soil and the atmosphere and (c) increasing agricultural productivity by the more efficient use of inputs. However, studies on these techniques do not reach similar conclusions. This could be expected, since the effectiveness of these techniques would depend... H.L. Burnquist, C.C. Costa |
10. Optical Sensors To Predict Nitrogen Demand By SugarcaneThe low effectiveness of nitrogen (N) from fertilizer is a substantial concern in worldwide which has been threatening the sustainability of sugarcane production. The increment of nitrogen use efficiency (NUE) by sugarcane genotypes associated to the best practices of fertilizer management and nutritional diagnosis methods have higher potential to reduce environment impacts of nitrogen fertilization. Due to the difficult to determine N status in soil test as well as there is not... O.T. Kolln, G.M. Sanches, J. Rossi neto, S.G. Castro, E. Mariano, R. Otto, R. Inamasu, P.S. Magalhães, O.A. Braunbeck, H.C. Franco |
11. Steering Strategy Selection of a Robotic Platform for Bin Management in Orchard EnvironmentFor a robotic bin-managing system working in an orchard environment, especially in modern narrow row spaced orchards in the Pacific Northwest (PNW) region of the U.S., path planning is an essential function to achieve highly efficient bin management. Unlike path planning for a car-like vehicle in an open field, path planning for a four-wheel-independent-steered (4WIS) robotic bin-managing platform in orchard environment is much more challenging due to the very confined working space between tree... Y. Ye, L. He, Q. Zhang |
12. A Long-Term Precision Agriculture System Maintains ProfitabilityAfter two decades of availability of grain yield-mapping technology, long-term trends in field-scale profitability for precision agriculture (PA) systems and conservation practices can now be assessed. Field-scale profitability of a conventional or ‘business-as-usual’ system with an annual corn (Zea mays L.)-soybean (Glycine max [L.]) rotation and annual tillage was assessed for 11 years on a 36-ha field in central Missouri during 1993 to 2003. Following this, a ‘precision agriculture... M.A. Yost, N.R. Kitchen, K.A. Sudduth, S.T. Drummond, R.E. Massey |
13. Prototype Unmanned Aerial Sprayer for Plant Protection in Agricultural and Horticultural CropsAerial application of pesticides has the potential to reduce the amount of pesticides required as chemicals are applied where needed. A prototype Unmanned Aerial Sprayer with a payload of 20 kg; a spraying rate of 6 liters per minute; a spraying swathe of 3 meters, coverage rate of 2 to 4 meters per second and 10 minutes of flight time was built using state of the art technologies. The project is a joint development by University of Agricultural Sciences, Dharwad, KLE Technological University,... S. Reddy, D.P. Biradar, V.C. Patil, B.L. Desai, V.B. Nargund, P. Patil, V. Desai, V. Tulasigeri, S.M. Channangi, W. John |
14. A Comparison of Three-Dimensional Data Acquisition Methods for Phenotyping ApplicationsCurrently Phenotyping is primarily performed using two-dimensional imaging techniques. While this yields interesting data about a plant, a lot of information is lost using regular cameras. Since a plant is three-dimensional, the use of dedicated 3D-imaging sensors provides a much more complete insight into the phenotype of the plant. Different methods for 3D-data acquisition are available, each with their inherent advantages and disadvantages. These have to be addressed depending on the particular... O. Scholz, F. Uhrmann, S. Gerth, K. Pieger, J. Claußen |
15. Development of Farmland-Terrain Simulation System for Consistency of Seeding DepthA farmland-terrain simulation system suitable for rugged topography was designed to study the irregularities of farmland surface morphology led by both topographic fluctuation and terrain tilt. The system consists of terrain simulation mechanism, hydraulic system, control system, etc. The terrain simulation mechanism is connected to the rack through hydraulic cylinder to simulate farmland surface fluctuation. The hydraulic system controls the hydraulic cylinder to drive the terrain simulation... W. Fu, J. Dong, Y. Cong, N. Gao, Y. Li, Z. Meng |
16. Crop Price Variation and Water Saving Technologies in Alborz Province of IranConsidering the importance and scarcity of water resources, the efficient management of water resources is of great imp,ortance. Adoption of modern irrigation technology is considered to be a key of increasing the efficiency of water used in agriculture. Policy makers have implemented several ways to induce the adoption of new irrigation technology. The empirical studies show that farmers are reluctant to utilize the use of new irrigation methods. This study aims to assess factors affecting on... S. Yazdani, S. Nikravesh, S. Bagheri |
17. Prototype Unmanned Aerial Sprayer for Plant Protection in Agricultural and Horticultural CropsAerial application of pesticides has the potential to reduce the amount of pesticides required as chemicals are applied where needed. A prototype Unmanned Aerial Sprayer with a payload of 20 kg; a spraying rate of 6 liters per minute; a spraying swathe of 3 meters, coverage rate of 2 to 4 meters per second and 10 minutes of flight time was built using state of the art technologies. The project is a joint development by University of Agricultural Sciences, Dharwad, KLE Technological University,... S. G, D.P. Biradar, B.L. Desai, V.C. Patil, P. Patil, V.B. Nargund, V. Desai, W. John, S.M. Channangi, V. Tulasigeri |
18. Soil and Crop Factors to Site-specific Nitrogen Management on Sugarcane FieldsNitrogen (N) is one of the most widely used fertilizers in crops and the most harmful to the environment. The increase fertilizers consumption, mainly N sources (one of the most widely fertilizer used in sugarcane fields), is one of the main factors underlying the sustainability of the entire production process. Currently, N recommendations in sugarcane are based only on the expected yield. However, there is little agronomic support for nitrogen (N) recommendations based on expected yield, despite... G.M. Sanches, R. Otto, F.R. Pereira |
19. Cherry Yield Forecast: Harvest Prediction for Individual Sweet Cherry TreesDigitalization continues to transform the agricultural sector as a whole and also affects specific niches like horticulture. Particularly in fruit and wine production, the focus is on the application of sensor systems and data analysis aiming at automated detection of drought stress or pests in vineyards or orchards. As part of the “For5G” project, we are developing an end-to-end methodology for the creation of digital twins of fruit trees, with a strong focus... A. Gilson, L. Meyer, A. Killer, F. Keil, O. Scholz, D. Kittemann, P. Noack, P. Pietrzyk, C. Paglia |