Proceedings
Authors
| Filter results40 paper(s) found. |
|---|
1. Performance Of The Veris Nir Spectrophotometer For Mapping Soil C In The Palouse Soils Of Eastern WashingtonRecent advances in sensing technology have made measuring and mapping the dynamics of important soil properties that regulate carbon and nutrient budgets possible. The Veris Technologies (Salinas, KS) Near Infrared (NIR) Spectrometer is one of the first sensors available for collecting geo-referenced NIR soil spectra on-the-go. Field studies were conducted to evaluate the performance of the Veris NIR in wheat grown under both conventional and no-till management in the Palouse region of eastern... F. Pierce, E.M. Perry, S.L. Young, H.P. Collins, P.G. Carter |
2. Cotton Precision Farming Adoption In The Southern United States: Findings From A 2009 SurveyThe objectives of this study were 1) to determine the status of precision farming technology adoption by cotton producers in 12 states and 2) to evaluate changes in cotton precision farming technology adoption between 2000 and 2008. A mail survey of cotton producers located in Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, Missouri, North Carolina, South Carolina, Tennessee, Texas and Virginia was conducted in February and March of 2009 to establish the use of precision farming technologies... M. Velandia, D.F. Mooney, R.K. Roberts, B.C. English, J.A. Larson, D.M. Lambert, S.L. Larkin, M.C. Marra, R. Rejesus, S.W. Martin, K.W. Paxton, A. Mishra, C. Wang, E. Segarra, J.M. Reeves |
3. Adoption And Perceived Usefulness Of Precision Soil Sampling Information In Cotton ProductionSoil testing assists farmers in identifying nutrient variability to optimize input placement and timing. Anecdotal evidence suggests that soil test information has a useful life of 3–4 years. However, perceived usefulness may depend on a variety of factors, including field variability, farmer experience and education, farm size, Extension, and factors indirectly related to farming. In 2009, a survey of cotton farmers in 12 Southeastern states collected information... D.C. Harper, D.M. Lambert, B.C. English, J.A. Larson, R.K. Roberts, M. Velandia, D.F. Mooney, S.L. Larkin |
4. Precision Nitrogen Management and Global Nitrogen Use EfficiencyTraditionally, nitrogen (N) fertilizers have been applied uniformly across entire field while ignoring inherent spatial variation in crop N needs across crop fields. This results in either too little or too much application of N in various parts of the fields.... M. Gupta, R. Khosla |
5. Factors Influencing the Timing of Precision Agriculture Technology Adoption in Southern U.S. Cotton ProductionTechnology innovators in cotton production adopted precision agriculture (PA) technologies soon after they became commercially available, while others adopted these technologies in later years after evaluating the success of the innovators. The timing of... D.M. Lambert, J.A. Larson, B.C. English, R.M. Rejesus, M.C. Marra, A.K. Mishra, C. Wang, P. Watcharaanantapong, R.K. Roberts, M. Velandia |
6. Computer Aided Engineering Analysis and Design Optimization for Precision Manufacturing of Tillage Tool: Sweep CultivatorThe process optimization in advance tillage tool system conceptually designed and fabricated by computer aided engineering analysis techniques. The Software testing a field performance is taken in the soil bed preparation as well as in the various crop patterns. It was found most use full in obtaining high weed removal efficiency. The precision geometry, optimum energy utilization, multi-operational design, easy transport and flexible attachments are some of the features which results in achieving... G.U. Shinde, D.M. Salokhe, P.D. Badgujar, D.B. Sharma |
7. The Adoption of Information Technologies and Subsequent Changes in Input Use in Cotton ProductionThe use of precision farming has become increasingly important in cotton production. It allows farmers to take advantage of knowledge about infield variability by applying expensive inputs at levels appropriate to crop needs. Essential to the success of the precision... N.M. Thompson, J.A. Larson, B.C. English, D.M. Lambert, R.K. Roberts, M. Velandia, C. Wang |
8. A High-Reliability Database-Supported Modular Precision Irrigation SystemTitle of Abstract: A High-Reliability Database-Supported Modular Precision Irrigation System Authors of Abstract: N. Kamel1, S. Sharaf1, A. El-Shafei2,... S. Sharaf, A. Elshafie, N.N. Kamel, D.A. Yousef |
9. Applications Of Small UAV Systems For Tree And Nursery Inventory ManagementUnmanned aerial vehicles (UAV) systems could provide low-cost and high spatial resolution aerial images. These features and ease of operation make it a practical tool for applications in precision agriculture and horticulture. This paper highlights the application of UAV systems in tree counting, which is vital for tree inventory management and yield estimation. In this paper, two types of trees were discussed. One type is with non-uniform canopy area (e.g. container plants and citrus... Y. She, R. Ehsani, J. Robbins, J. Owen, J.N. Leiva |
10. An Inexpensive Aerial Platform For Precise Remote Sensing Of Almond And Walnut Canopy TemperatureCurrent irrigation practices depend largely on imprecise applications of water over fields with varying degrees of heterogeneity. In most cases, the amount of water applied over a given field is determined by the amount the most water-stressed part of the field needs. This equates to over-watering most of the field in order to satisfy the needs of one part of the field. This approach not only wastes resources, but can have a detrimental effect on the value of that crop. A system to... K. Crawford, S. Upadhyaya, R. Dhillon, F. Rojo, J. Roach |
11. Advances In Automating Individual Plant Care Of Vegetable CropsAutomation of individual crop plant care in commercial vegetable crop fields has increased practical feasibility and improved efficiency and economic benefit if a systems approach is taken in the engineering design to mechanization that incorporates precision planting techniques. In addition to the optimization in the biological productivity of crop plants when the spatial distribution of crop plants allows their uniform access to nutrients, water and light in an optimum utilization... M. Pérez ruiz, D.C. Slaughter |
12. Spatial-temporal Evaluation of Plant Phenotypic Traits Via Imagery Collected by Unmanned Aerial Systems (UAS)Unmanned aerial systems (UAS) and a stereovision approach were implemented to generate a 3D reconstruction of the top of the canopy. The 3D reconstruction or CSM (crop surface model) was utilized to evaluate biophysical parameters for both spatial- and temporal-scales. The main goal of the project was to evaluate sUAVs technology to assist plant height and biomass estimation. The main outcome of this process was to utilize CSMs to gain insights in the spatial-temporal dynamic of plants within... S. Varela, G. Balboa, V. Prasad, T. Griffin, I. Ciampitti, A. Ferguson |
13. Measuring Pasture Mass and Quality Indices Over Time Using Proximal and Remote SensorsTraditionally pasture has been measured or evaluated in terms of a dry matter yield estimate, which has no reference to other important quality factors. The work in this paper measures pasture growth rates on different slopes and aspects and pasture quality through nitrogen N% and metabolizable energy and ME concentration. It is known that permanent pasture species vary greatly in terms of quality and nutritional value through different stages of maturity. Pasture quality decreases as grass tillers... I.J. Yule, M.C. Grafton, L.A. Willis, P.J. Mcveagh |
14. Spatial-temporal Evaluation of Plant Phenotypic Traits Via Imagery Collected by Unmanned Aerial Systems (UAS)Unmanned aerial systems (UAS) and a stereovision approach were implemented to generate a 3D reconstruction of the top of the canopy. The 3D reconstruction or CSM (crop surface model) was utilized to evaluate biophysical parameters for both spatial- and temporal-scales. The main goal of the project was to evaluate sUAVs technology to assist plant height and biomass estimation. The main outcome of this process was to utilize CSMs to gain insights in the spatial-temporal dynamic of plants within... S. Varela, G. Balboa, V. Prasad, T. Griffin, I. Ciampitti, A. Ferguson |
15. Integrated Approach to Site-specific Soil Fertility ManagementIn precision agriculture the lack of affordable methods for mapping relevant soil attributes is a fundamental problem. It restricts the development and application of advanced models and algorithms for decision making. The project “I4S - Integrated System for Site-Specific Soil Fertility Management” combines new sensing technologies with dynamic soil-crop models and decision support systems. Using sensors with different measurement principles improves the estimation of soil fertility... R. Gebbers, V. Dworak, B. Mahns, C. Weltzien, D. Büchele, I. Gornushkin, M. Mailwald, M. Ostermann, M. Rühlmann, T. Schmid, M. Maiwald, B. Sumpf, J. Rühlmann, M. Bourouah, H. Scheithauer, K. Heil, T. Heggemann, M. Leenen, S. Pätzold, G. Welp, T. Chudy, A. Mizgirev, P. Wagner, T. Beitz, M. Kumke, D. Riebe, C. Kersebaum, E. Wallor |
16. Large-scale UAS Data Collection, Processing and Management for Field Crop ManagementNorth Dakota State University research and Extension personnel are collaborating with Elbit Systems of America to compare the usefulness and economics of imagery collected from a large unmanned aircraft systems (UAS), small UAS and satellite imagery. Project personnel are using a large UAS powered with an internal combustion engine to collect high-resolution imagery over 100,000 acres twice each month during the crop growing season. Four-band multispectral Imagery is also being collected twice... J. Nowatzki, S. Bajwa, D. Roberts, M. Ossowski, A. Scheve, A. Johnson, Y. Chaplin |
17. Knowledge, Skills and Abilities Needed in the Precision Ag Workforce: an Industry SurveyPrecision agriculture encompasses a set of related technologies aimed at better utilization of crop inputs, increasing yield and quality, reducing risks, and enabling information flow throughout the crop supply and end-use chains. The most widely adopted precision practices have been automated systems related to equipment steering and precise input application, such as autoguidance and section controllers. Once installed, these systems are relatively easy for farmers and their supporting... B. Erickson, D.E. Clay, S.A. Clay, S. Fausti |
18. Application of Radio Frequency Identification Technology in Agriculture: a Case with Dragon FruitGlobal and local concerns about food safety are turning food traceability into a trade requirement. Typically, a Food Traceability Scheme (FTS) discloses information about food production and its distribution process. A reliable FTS will increase consumer trust in the quality and safety of farm produce. In Malaysia, dragon fruit is a profitable commodity that is growing in export value. Hence, dragon fruit is an excellent candidate for FTS solution development. ... S.K. Balasundram, M.H. Husni |
19. Managing Soil Moisture on Turf Grass Using a Portable Wave ReflectometerThe agronomic needs of grass pose many challenges to managing irrigation on golf greens and lawns. Superintendents must keep putting greens as dry and firm as possible without allowing them to die. Commercial and residential landscapes are expected to look lush and green. But soil moisture has high spatial variability, including hot spots that can rapidly become critically low in available water. One common method of measuring soil moisture is to take core samples and assess moisture content by... D.L. Kieffer, T.S. O'connor |
20. Thermal Characterization and Spatial Analysis of Water Stress in Cotton (Gossypium Hirsutum L.) and Phytochemical Composition Related to Water Stress in Soybean (Glycine Max)Studies were designed to explore spatial relationships of water and/or heat stress in cotton and soybeans and to assess factors that may influence yield potential. Investigations focused on detecting the onset of water/heat stress in row crops using thermal and multispectral imagery with ancillary physicochemical data such as soil moisture status and photosynthetic pigment concentrations. One cotton field with gradations in soil texture showed distinct patterns in thermal imagery, matching patterns... S.J. Thomson, S.L. Defauw, P.J. English, J.E. Hanks, D.K. Fisher, P.N. Foster, P.V. Zimba |
21. Yield Assessment of a 270 000 Plant Perennial Ryegrass Field Trial Using a Multispectral Aerial Imaging PlatformCurrent assessment of non-destructive yield in forage breeding programs relies largely on the visual assessment by experts, who would categorize biomass to a discrete scale. Visual assessment of biomass yield has inherent pitfalls as it can generate bias between experimental repeats and between different experts. Visual assessment is also time-consuming and would be impractical on large-scale field trials. A method has been established to allow for a rapid, non-destructive assessment of biomass... P.E. Badenhorst, A. Phelan |
22. Use of Proximal Soil Sensing to Delineate Management Zones in a Commercial Potato Field in Prince Edward Island, CanadaManagement zones (MZs) are delineated areas within an agricultural field with relatively homogenous soil properties. Such MZs can often be used for site-specific management of crop production inputs. The purpose of this study was to determine the efficiency of two proximal soil sensors for delineating MZs in an 8.1-ha commercial potato (Solanum tuberosum L.) field in Prince Edward Island (PEI), Canada. A galvanic contact resistivity sensor (Veris-3100 [Veris]) and electromagnetic induction sensors... A. Cambouris, A. Lajili, K. Chokmani , I. Perron, V. Adamchuk, A. Biswas , B. Zebrath |
23. Detection and Monitoring the Risk Level for Lameness and Lesions in Dairy Herds by Alternative Machine-Learning AlgorithmsMachine-learning methods may play an increasing role in the development of precision agriculture tools to provide predictive insights in dairy farming operations and to routinely monitor the status of dairy cows. In the present study, we explored the use of a machine-learning approach to detect and monitor the welfare status of dairy herds in terms of lameness and lesions based on pre-recorded farm-based records. Animal-based measurements such as lameness and lesions are time-consuming, expensive... D. Warner, R. Lacroix, E. Vasseur, D. Lefebvre |
24. Pest Detection on UAV Imagery Using a Deep Convolutional Neural NetworkPresently, precision agriculture uses remote sensing for the mapping of crop biophysical parameters with vegetation indices in order to detect problematic areas, and then send a human specialist for a targeted field investigation. The same principle is applied for the use of UAVs in precision agriculture, but with finer spatial resolutions. Vegetation mapping with UAVs requires the mosaicking of several images, which results in significant geometric and radiometric problems. Furthermore, even... Y. Bouroubi, P. Bugnet, T. Nguyen-xuan, C. Bélec, L. Longchamps, P. Vigneault, C. Gosselin |
25. Usage of Milk Revenue Per Minute of Boxtime to Assess Cows Selection and Farm Profitability in Automatic Milking SystemsThe number of farms implementing robotic milking systems, usually referred as automatic milking systems (AMS), is increasing rapidly. AMS efficiency is a priority to achieve high milk production and higher incomes from dairy herds. Recent studies suggested that milkability (i.e., amount of milk produced per total time spent in the AMS [kg milk/ minute of boxtime]) could be used for as a criteria for genetic evaluations. Therefore, an indicator of milkability was developed, which combines economical... L. Fadul-pacheco, G. Bisson, R. Lacroix, M. Séguin, R. Roy, E. Vasseur, D. Lefebvre |
26. Characterization of Soil Properties, Nutrient Distribution and Rice (Oryza Sativa.) Productivity As Influenced by Tillage Methods in a Typical GleysolsGlobal emphasis and interest in conservation Tillage in agricultural soils has tremendously increased in the last few years, especially no tillage with its potential to improve soil physicochemical properties, reduce nutrient leaching as well as improve crop productivity in a more sustainable manner. Several questions still exist with regard to the true role of no tillage in improving soil fertility. A two year field study was conducted to characterize the effects of different tillage methods... F. Issaka, L. Yongtao, L. Jiuhao, M.M. Buri, E. Asenso, A. Sheka kanu, Z. Zhao |
27. Tracking Two Decades of Precision Agriculture Through the Croplife Purdue SurveyThe CropLife/Purdue University precision dealer survey is the longest-running continuous survey of precision farming adoption. The 2017 survey is the 18th, conducted every year from 1997 to 2009, and then every other year following. For individuals working in agriculture there is great value in knowing who is doing what and why, to get a better understanding of the utilities and applications, and to guide investments. A major revision in survey questions was made... B. Erickson, J. Lowenberg-deboer, J. Bradford |
28. Rapid Acquisition of Site Specific Lime Requirement with Mid-Infrared SpectroscopyIn Germany, the lime requirement of arable topsoils is derived from the organic matter content, clay content, and pH(CaCl2). For this purpose, it is common practice to determine the lime requirement of a field size up to three hectares from only one composite soil sample, whereby site heterogeneity is regularly not taken into account. To consider site heterogeneity, a measurement technique is required which allows a rapid and high resolution data acquisition. Mid-infrared... M. Leenen, S. Pätzold, T. Heggemann, G. Welp |
29. Towards Universal Applicability of On-the-Go Gamma-Spectrometry for Soil Texture Estimation in Precision Farming by Using Machine Learning ApplicationsHigh resolution soil data are an essential prerequisite for the application of precision farming techniques. Sensor-based evaluation of soil properties may replace or at least reduce laborious, time-consuming and expensive soil sampling with subsequent measurements in the lab. Gamma spectrometry usually provides information that can be translated into topsoil texture data after calibration. This is because the natural content of the radioactive isotopes 40-K, 232-Th, and 238-U as well... S. Pätzold, T. heggemann, M. Leenen, S. Koszinski, K. Schmidt, G. Welp |
30. Development of an Online Decision-Support Infrastructure for Optimized Fertilizer ManagementDetermination of an optimum fertilizer application rate involves various influential factors, such as past management, soil characteristics, weather, commodity prices, cost of input materials and risk preference. Spatial and temporal variations in these factors constitute sources of uncertainties in selecting the most profitableapplication rate. Therefore, a decision support system (DSS) that could help to minimize production risks in the context of uncertain crop performance is needed. This... S. Shinde, V. Adamchuk, R. Lacroix, N. Tremblay, Y. Bouroubi |
31. Effect of Composts Prepared from Municipal Solid Waste in the Agrochemical Properties of Serosem Soils of UzbekistanOptimizing soil fertility and agro-chemical soil properties are currently of great importance, since the content of humus and nutrients from year to year decreases. The reason for decline of soil fertility is the lack of organic fertilizers and use of crop rotation involving leguminous perennial herb. On the other hand a source of organic fertilizer can be municipal solid waste. Currently in the cities of Uzbekistan accumulated huge amount of solid waste whose disposal is an environmental necessity... S. Kholikulov, S. Pardaev |
32. Farming for a Greener Future: the Behavioural Drive Behind German Farmers’ Alternative Fuel Machinery Purchase IntentionsClimate change due to greenhouse gas emissions, e.g. anthropogenic carbon dioxide (CO2), in the atmosphere will lead to damages caused by global warming, increases in heavy rainfall, flooding as well as permafrost melt. One of the main issues for reducing greenhouse gas emissions is the dependence on oil for fueling transportation and other sectors. Accordingly, policy makers aim to reduce dependency on fossil fuels with the accelerated roll-out of renewable energy. Among others, the... M. Michels, V. Bonke, H. Wever, O. Mußhoff |
33. Global Adoption of Precision Agriculture: an Update on Trends and Emerging TechnologiesThe adoption of precision agriculture (PA) has been mixed. Some technologies (e.g., Global Navigation Satellite System (GNSS) guidance) have been adopted rapidly worldwide wherever there is mechanized agriculture. Adoption of some of the original PA technologies introduced in the 1990s has been modest almost everywhere (e.g., variable rate fertilizer). New and more advanced technologies based on robotics, uncrewed aerial vehicles (UAVs), machine vision, co-robotic automation, and artificial intelligence... J. Mcfadden, B. Erickson, J. Lowenberg-deboer, G. Milics |
34. A Fusion Strategy to Map Corn Crop ResiduesAccess to post-harvest residue coverage information is crucial for agricultural management and soil conservation. The purpose of this study was to present a new approach based on an ensemble at the decision level for mapping the corn residue. To this end, a set of Landsat 8 imagery and field data including the Residue Cover Fraction (RCF) of corn (149 samples), were used. Firstly, a map of common spectral indices for RCF modeling was prepared based on the spectral bands. Then, the efficiency of... S. Fathololoumi, M.K. Firozjaei, A. Biswas, P. Daggupati |
35. Multi-sensor Remote Sensing: an AI-driven Framework for Predicting Sugarcane FeedstockPredicting saccharine and bioenergy feedstocks in sugarcane enables stakeholders to determine the precise time and location for harvesting a better product in the field. Consequently, it can streamline workflows while enhancing the cost-effectiveness of full-scale production. On one hand, Brix, Purity, and total reducing sugars (TRS) can provide meaningful and reliable indicators of high-quality raw materials for industrial food and fuel processing. On the other hand, Cellulose, Hemicellulose,... M. Barbosa, D. Duron, F. Rontani, G. Bortolon, B. Moreira, L. Oliveira, T. Setiyono, L. Shiratsuchi, R.P. Silva, K.H. Holland |
36. UAV Multispectral Data As a Suitable Tool for Predicting Sweetness, Size, and Yield of Vidalia OnionsVidalia onions is a specialty crop cultivated solely within the southeastern region of Georgia. The key distinguishing characteristic of Vidalia onions is its high sugar content, making them highly prized and widely consumed. Ten thousand acres are grown with Vidalia Onions each year approximately, and the market value (~$150Mi/year) makes the crop very important for the State of Georgia. Traditionally, the planting, weeding, spraying, harvesting, and post-harvesting operations are usually done... M. Barbosa, L. Oliveira, C. Tyson, A. Shirley, R. Santos, L. Sales, R. Vargas |
37. Machine Learning Model to Predict Total Nozzle Volume Delivery for Pulse Width Modulated Flow ControllersProduct flow rate in the Pulse Width Modulation (PWM) variable rate technologies depends on the duty cycle. However, the actual product flow rate at any duty cycle depends on pressure rise, stable pressure during the cycle, fall time and pressure drop across the nozzle body. The current controller does not consider the pressure drops and the estimation of actual flow during each cycle at any duty cycle cannot be estimated with capturing high-frequency pressure data. Knowledge of volume delivery... S. Dua, A. Sharda |
38. Advancements in Agricultural Robots for Specialty Crops: a Comprehensive Review of Innovations, Challenges, and ProspectsThe emergence of robot technology presents a timely opportunity to revolutionize specialty crop production, offering crucial support across various activities such as planting, supporting general traits, and harvesting. These robots play a pivotal role in keeping stakeholders up-to-date of developments in their production fields, while providing them the capability to automate laborious tasks. Then, to elucidate the advancements in this domain, we present the results of a comprehensive review... M. Barbosa, R. Santos, L. Sales, L. Oliveira |
39. Computer Vision by UAVs for Estimate Soybean Population Across Different Physiological Growth Stages and Sowing SpeedsSoybean (Glycine max (Linnaeus) Merrill) production in the United States plays a crucial role in agriculture, occupying a considerable amount of cultivated land. However, the costs associated with soybean production have shown a notable increase in recent years, with seed-related expenses accounting for a significant proportion of the total. This increase in costs is attributed to a number of factors, including the introduction of patented and protected genetic traits, as well as inflationary... F. Pereira de souza, L. Shiratsuchi, H. Tao, M. Acconcia dias, M. Barbosa, T. Deri setiyono, S. campos |
40. Optimizing Soybean Management with UAV RGB and Multispectral Imagery: a Neural Network Method and Image ProcessingPrecision agriculture (PA) has emerged as a fundamental approach in contemporary agricultural management, aimed at maximizing efficiency in the use of resources and improving crop productivity. The transition to so-called "agriculture 4.0" represents a revolution in the way technology is applied in the field, with an emphasis on digital and automated solutions such as UAVs (Unmanned Aerial Vehicles). These devices offer new capabilities for capturing high-resolution images, enabling... F. Pereira de souza, L. Shiratsuchi, H. Tao, M. Acconcia dias, M. Barbosa, T. deri setiyono, S. Campos |