Authors
Filter results4 paper(s) found. |
---|
1. Optical Based Sugarcane Yield MonitorsSeveral different optical sensors were investigated to detect sugarcane yield on a billet type sugarcane harvester. These sensors included an over-head optical sensor and a below-the-conveyor sensor. Both sensors indicated mass flow rate from a volume measurement of the cane on the conveyor slats. Both systems gave good results with linear line calibration equations and adjusted R-square values from 0.96 to 0.97. Weight wagon weights in the 0.6 to 1.6 metric ton range were estimated to 7.5% on... R. Price, R.M. Johnson, R.P. Viator |
2. Application Rate Stability When Implementing Automatic Section Control Technology On Agricultural SprayersAutomatic section control (on and off) technology of sprayer boom sections is an intelligent solution to maximize spray application efficiency during field operations. This technology can reduce over-application of products. Spray controllers available with this technology attempt to maintain the set target rate by adjusting system flow rate based on ground speed and application width. Therefore, as sections are turned on or off, the flow regulating hardware must respond to maintain... A. Sharda, J.D. Luck, J.P. Fulton, S.A. Shearer, S.A. Shearer, D. Mullenix, M. Vanacht |
3. Spatial Variability of Sugarcane Yields in Relation to Soil Salinity in LouisianaHigh soil salinity levels have been documented to negatively impact sugarcane yields. Tests were conducted in commercial sugarcane fields in South Louisiana in 2009-2010 to determine if elevated soil salinity levels... R.P. Viator, R.M. Johnson |
4. Design, Error Characterization And Testing Of A System To Measure Locations Of Fruits In Tree CanopiesMapping the variability of fruit size and quality within tree canopies in commercial orchards is an important tool for implementing precision horticulture. To do so at a reasonably fast rate requires localization technologies that offer sufficient speed and accuracy, at a range long enough to cover entire trees – or several trees at a time. Existing approaches for measuring fruit locations include: manual (centimeter accuracy and measurement time in the order of minutes per... S.G. Vougioukas, F.J. Jimenez, F. Khosro anjom, R. Elkins, C. Ingels, R. Arikapudi |