Authors
Filter results16 paper(s) found. |
---|
1. Comparison Of Spectral Indices Derived From Active Crop Canopy Sensors For Assessing Nitrogen And Water Status... L. Shiratsuchi, R.B. Ferguson, J.F. Shanahan, V.I. Adamchuk, G. Slater |
2. Using Soil Attributes To Model Sugar Cane Quality ParametersThe crop area of sugar cane production in Brazil has increased substantially in the last few years, especially to meet the global bioethanol demand. Such increasing production should take place not only in new sugar cane crop areas but mainly with the goal of improving the quality of raw material like sugar content (Pol). Hence, models that can describe the behaviour of the quality parameters of sugar cane may be important to understand the effects of the soil attributes on those parameters. The... F.A. Rodrigues jr., P.S. Magalhães, H.C. Franco, D.G. Cerri |
3. Integrated Crop Canopy Sensing System for Spatial Analysis of In-Season Crop PerformanceOver the past decade, the relationships between leaf color, chlorophyll content, nitrogen supply, biomass and grain yield of agronomic crops have been studied widely.... L. Shiratsuchi, C.C. Lutz, R.B. Ferguson, V.I. Adamchuk |
4. Multivariate Geostatistics As A Tool To Estimate Physical And Chemical Soil Properties With Reduced Sampling In Area Planted With SugarcanePrecision Agriculture (PA) can be described as a set of tools and techniques applied to agriculture in order to enable localized production management, considering the spatial and temporal variability of crop fields. Among the numerous existing tools, one of the most important ones is the use of geostatistics, whose main objective is the description of spatial patterns and estimation data in non-sampled places. Nowadays, one of the most limiting factors to the... G.M. Sanches, P.S. Graziano magalhaes, H.C. Franco, A.Z. Remacre |
5. Precision Agriculture In Sugarcane Production. A Key Tool To Understand Its Variability.Precision agriculture (PA) for sugarcane represents an important tool to manage local application of fertilizers, mainly because sugarcane is third in fertilizer consumption among Brazilian crops, after soybean and corn. Among the limiting factors detected for PA adoption in the sugarcane industry, one could mention the cropping system complexity, data handling costs, and lack of appropriate decision support systems. The objective of our research group has... P.S. Graziano magalhães, G.M. Sanches, O.T. Kolln, H.C. Franco, O.A. Braunbeck, C. Driemeier |
6. Optical Sensors To Predict Nitrogen Demand By SugarcaneThe low effectiveness of nitrogen (N) from fertilizer is a substantial concern in worldwide which has been threatening the sustainability of sugarcane production. The increment of nitrogen use efficiency (NUE) by sugarcane genotypes associated to the best practices of fertilizer management and nutritional diagnosis methods have higher potential to reduce environment impacts of nitrogen fertilization. Due to the difficult to determine N status in soil test as well as there is not... O.T. Kolln, G.M. Sanches, J. Rossi neto, S.G. Castro, E. Mariano, R. Otto, R. Inamasu, P.S. Magalhães, O.A. Braunbeck, H.C. Franco |
7. The Most Sensitive Growth Stage To Quantify Nitrogen Stress In Sugarcane Using Active Crop Canopy SensorThe use of sensors that allow the application of nitrogen fertilizer at variable rate has been widely used by researchers in many agricultural crops, but without success in sugarcane, probably due to the difficulty of diagnosing the nutritional status of the crop for nitrogen (N). Active crop canopy sensors are based on the principle that the spectral reflectance curve of the leaves are modified by N level. Researchers in USA indicated that in-season N stress in corn can be detected... S.G. Castro, O.T. Kolln, H.S. Nakao, H.C. Franco, O. Braunbeck, P.S. Graziano magalhães, G.M. Sanches |
8. Use of Crop Canopy Reflectance Sensor in Management of Nitrogen Fertilization in Sugarcane in BrazilGiven the difficulty to determine N status in soil testing and lack of crop parameters to recommend N for sugarcane in Brazil raise the necessity of identify new methods to find crop requirement to improve the N use efficiency. Crop canopy sensor, such as those used to measure indirectly chlorophyll content as N status indicator, can be used to monitor crop nutritional demand. The objective of this experiment was to assess the nutritional status of the sugarcane fertilized with different nitrogen... S.G. Castro, G.M. Sanches, G.M. Cardoso, A.E. Silva, H.C. Franco, P.S. Magalhães |
9. Translating Data into Knowledge - Precision Agriculture Database in a Sugarcane Production.The advent of Information Technology in agriculture, surveying and data collection became a simple task, starting the era of "Big Data" in agricultural production. Currently, a large volume of data and information associated with the plant, soil and climate are collected quick and easily. These factors influence productivity, operating costs, investments and environment impacts. However, a major challenge for this area is the transformation of data and information... G.M. Sanches, O.T. Kolln, H.C. Franco, P.S. Magalhaes, D.G. Duft |
10. Apparent Electrical Conductivity Sensors and Their Relationship with Soil Properties in Sugarcane FieldsOne important tool within the technological precision agriculture (PA) package are the apparent electrical conductivity (ECa) sensors. This kind of sensor shows the ability in mapping soil physicochemical variability quickly, with high resolution and at low cost. However, the adoption of this technology in Brazil is not usual, particularly on sugarcane fields. A major issue for farmers is the applicability of ECa, how to convert ECa data in knowledge that may assist the producer in decision-making... G.M. Sanches, L.R. Amaral, T. Pitrat, T. Brasco, P.S. Magalhaes, D.G. Duft, H.C. Franco |
11. A Tree Planting Site-Specific Fumigant Applicator for Orchard CropsThe goal of this research was to use recent advances in the global positioning system and computer technology to apply just the right amount of fumigant where it is most needed (i.e., in the neighborhood of each tree planting site or tree- planting-site-specific application) to decrease the incidence of replant disease, and achieve the environmental and economical benefits of reducing the application of these toxic chemicals. In the first year of this study we retrofitted a chemical applicator... S.K. Upadhayaya, V. Udompetaikul, M.S. Shafii, G.T. Browne |
12. Economic and Environmental Impacts in Sugarcane Production to Meet the Brazilian Ethanol Demands by 2030: The Role of Precision AgricultureThe agreement signed at COP-21 reaffirms the vital compromise of Brazil with sugarcane and ethanol production. To meet the established targets, the ethanol production should be 54 billion liters in 2030. From the agronomic standpoint, two alternatives are possible; increase the planted area and/or agricultural yield. The present study aimed to evaluate the economic and environmental impacts in sugarcane production meeting the established targets in São Paulo state. In this context, were... G.M. Sanches, T.F. Cardoso, M.F. Chagas, A.C. Luciano, D.G. Duft, P.S. Magalhães, H.C. Franco, A. Bonomi |
13. Potential of Apparent Soil Electrical Conductivity to Describe Soil Spatial Variability in Brazilian Sugarcane FieldsThe soil apparent electrical conductivity (ECa) has been highlighted in the literature as a tool with high potential to map the soil fertility of fields. However, sugarcane fields still lack results that show the applicability of this information to define the soil spatial variability and its fertility conditions. The objective of the present paper was to provide a comprehensive assessment of the relationship between ECa, evaluated by electromagnetic induction (EMI) sensor, and the spatial variability... G.M. Sanches, P.S. Magalhães, H.C. Franco, A.Z. Remacre |
14. Multi-sensor Remote Sensing: an AI-driven Framework for Predicting Sugarcane FeedstockPredicting saccharine and bioenergy feedstocks in sugarcane enables stakeholders to determine the precise time and location for harvesting a better product in the field. Consequently, it can streamline workflows while enhancing the cost-effectiveness of full-scale production. On one hand, Brix, Purity, and total reducing sugars (TRS) can provide meaningful and reliable indicators of high-quality raw materials for industrial food and fuel processing. On the other hand, Cellulose, Hemicellulose,... M. Barbosa, D. Duron, F. Rontani, G. Bortolon, B. Moreira, L. Oliveira, T. Setiyono, L. Shiratsuchi, R.P. Silva, K.H. Holland |
15. Computer Vision by UAVs for Estimate Soybean Population Across Different Physiological Growth Stages and Sowing SpeedsSoybean (Glycine max (Linnaeus) Merrill) production in the United States plays a crucial role in agriculture, occupying a considerable amount of cultivated land. However, the costs associated with soybean production have shown a notable increase in recent years, with seed-related expenses accounting for a significant proportion of the total. This increase in costs is attributed to a number of factors, including the introduction of patented and protected genetic traits, as well as inflationary... F. Pereira de souza, L. Shiratsuchi, H. Tao, M. Acconcia dias, M. Barbosa, T. Deri setiyono, S. campos |
16. Optimizing Soybean Management with UAV RGB and Multispectral Imagery: a Neural Network Method and Image ProcessingPrecision agriculture (PA) has emerged as a fundamental approach in contemporary agricultural management, aimed at maximizing efficiency in the use of resources and improving crop productivity. The transition to so-called "agriculture 4.0" represents a revolution in the way technology is applied in the field, with an emphasis on digital and automated solutions such as UAVs (Unmanned Aerial Vehicles). These devices offer new capabilities for capturing high-resolution images, enabling... F. Pereira de souza, L. Shiratsuchi, H. Tao, M. Acconcia dias, M. Barbosa, T. deri setiyono, S. Campos |