Authors
| Filter results6 paper(s) found. |
|---|
1. Performance Evaluation Of Single And Multi-GNSS Receivers In Agricultural Field ConditionsSelection of appropriate receivers and utilization methods of positioning systems are important for better positioning in different applications of precision agriculture. Objective of this research was to evaluate the performance of single and multi-GNSS receivers at stationary and moving conditions in typical Korean agricultural sites such as open field, orchard area, and mountainous area A single-GNSS receiver (Model: R100; Hemisphere GNSS, Scottsdale, AZ, USA) and a multi-GNSS... Y. Kim, M. Song, S. Chung , M.S. Kabir, Y. Huh |
2. Basic Tests Of pH And EC Probes For Automatic Real Time Nutrient Control In Protected Crop ProductionResearch on greenhouse and plant factory has been actively conducting to provide a stable growth environment. In plant factory, EC concentration (EC) and acidity (pH) of nutrient have a significant impact on physiological and morphological of plant. Therefore, EC and pH are important element for automatic control of nutrient solution. In this study, performance pH and EC sensors was evaluated for the responsiveness, accuracy and displacement. This study includes development of environmental... Y. Choo, S. Chung, Y. Huh, Y. Kim, S. Jang, K. Jung |
3. Post Processing Software for Grain Yield Monitoring System Suitable to Korean Full-feed CombinesPrecision agriculture (PA) has been adopted in many countries and crop and country specific technologies have been implemented for different crops and agricultural practices. Although PA technologies have been developed mainly in countries such as USA, Europe, Australia, where field sizes are large, need of PA technologies has been also drawn in countries such as Japan and Korea, where field sizes are relatively small (about 1 ha). Although principles are similar, design concept and practical... K. Lee, S. Chung, J. Lee, S. Kim, Y. Kim, M. Choi |
4. Evaluation of a Sensor and Control Interface Module for Monitoring of Greenhouse EnvironmentProtected horticulture in greenhouses and plant factories has been increased in many countries due to the advantages of year-round production in controlled environment for improved productivity and quality. For protected horticulture, environmental conditions are monitored and controlled through wired and wireless devices. Various devices are used for monitoring and control of spatial and temporal variability in crop growth environmental conditions. Recently, various sensors and control devices,... N. Sung, S. Chung, Y. Kim, K. Han, J. Choi, J. Kim, Y. Cho, S. Jang |
5. Sensor Comparison for Yield Monitoring Systems of Small-Sized Potato HarvestersYield monitoring of potato in real time during harvesting would be useful for farmers, providing instant yield and income information. In the study, potentials of candidate sensors were evaluated with different yield measurement techniques for yield monitoring system of small-sized potato harvesters. Mass-based (i.e., load cell) and volume-based (i.e., CCD camera) sensors were selected and tested under laboratory conditions. For mass-based sensing, an impact plate instrumented with load cells... K.M. Swe, Y. Kim, D. Jeong, S. Lee, S. Chung, M.S. Kabir |
6. Variability Analysis of Temperature and Humidity for Control Optimization of a Hybrid Dehumidifier with a Heating Module for GreenhousesProtected horticulture using greenhouses and also recently plant factories is becoming more popular, especially for high-value crops such as paprika, tomato, strawberry, due to year-round production of high yield and better quality crops under controlled environment. Temperature and humidity are most important ambient environmental factors for not only optimum crop growth but also disease control. This study was conducted to analyze vertical and spatial variability of temperature and humidity... Y. Seo, W. Lee, Y. Kim, S. Chung, S. Jang, I. Bae |